Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2024-10-23 06:56:46
From: jklos
Description: Packard Bell Multimedia L197
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.000000] 2024 [ 1.000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 10.0_STABLE (PACKARDBELL) #0: Wed Oct 23 03:25:59 UTC 2024 [ 1.000000] [_EMAIL_XXXXXXXX]:/usr/obj-i386/sys/arch/i386/compile/PACKARDBELL [ 1.000000] total memory = 65148 KB [ 1.000000] avail memory = 58200 KB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] RTC BIOS diagnostic error 0x4<invalid_time> [ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 [ 1.000003] mainbus0 (root) [ 1.000003] cpu0 at mainbus0 [ 1.000003] cpu0: Use cpuid to serialize rdtsc [ 1.000003] cpu0: Intel 586-class, 205MHz, id 0x52c [ 1.000003] cpu0: node 0, package 0, core 0, smt 0 [ 1.000003] pci0 at mainbus0 bus 0: configuration mode 1 [ 1.000003] pci0: This pci host supports neither MSI nor MSI-X. [ 1.000003] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.000003] pchb0 at pci0 dev 0 function 0: vendor 8086 product 7030 (rev. 0x02) [ 1.000003] pcib0 at pci0 dev 7 function 0: vendor 8086 product 7000 (rev. 0x01) [ 1.000003] piixide0 at pci0 dev 7 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00) [ 1.000003] piixide0: bus-master DMA support present [ 1.000003] piixide0: primary channel wired to compatibility mode [ 1.000003] piixide0: primary channel interrupting at irq 14 [ 1.000003] atabus0 at piixide0 channel 0 [ 1.000003] piixide0: secondary channel wired to compatibility mode [ 1.000003] piixide0: secondary channel interrupting at irq 15 [ 1.000003] atabus1 at piixide0 channel 1 [ 1.000003] uhci0 at pci0 dev 7 function 2: vendor 8086 product 7020 (rev. 0x01) [ 1.000003] uhci0: interrupting at irq 11 [ 1.000003] usb0 at uhci0: USB revision 1.0 [ 1.000003] vga0 at pci0 dev 8 function 0: vendor 1002 product 5654 (rev. 0x40) [ 1.000003] wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation) [ 1.000003] wsmux1: connecting to wsdisplay0 [ 1.000003] wsdisplay0: screen 1-3 added (80x25, vt100 emulation) [ 1.000003] drm at vga0 not configured [ 1.000003] isa0 at pcib0 [ 1.000003] lpt0 at isa0 port 0x378-0x37b irq 7 [ 1.000003] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16-byte FIFO [ 1.000003] pckbc0 at isa0 port 0x60-0x64 [ 1.000003] pckbd0 at pckbc0 (kbd slot) [ 1.000003] pckbc0: using irq 1 for kbd slot [ 1.000003] wskbd0 at pckbd0: console keyboard, using wsdisplay0 [ 1.000003] attimer0 at isa0 port 0x40-0x43 [ 1.000003] pcppi0 at isa0 port 0x61 [ 1.000003] spkr0 at pcppi0: PC Speaker [ 1.000003] wsbell at spkr0 not configured [ 1.000003] midi0 at pcppi0: PC speaker [ 1.000003] sysbeep0 at pcppi0 [ 1.000003] isapnp0 at isa0 port 0x279 [ 1.000003] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 [ 1.000003] attimer0: attached to pcppi0 [ 1.000003] isapnp0: read port 0x203 [ 1.000003] isapnp0: <AZT1015 PnP SOUND DEVICE, AZT0500, , IDE CDROM DISAB> irq 0 not configured [ 1.000003] isapnp0: <AZT1015 PnP SOUND DEVICE, AZT1011, , AUDIO> port 0x220/16,0x388/8,0x534/4 irq 5 drq 1,0 not configured [ 1.000003] mpu0 at isapnp0 port 0x330/2 irq 9 [ 1.000003] mpu0: AZT1015 PnP SOUND DEVICE MPU401 MIDI [ 1.000003] midi at mpu0 not configured [ 1.000003] joy0 at isapnp0 port 0x200/8 [ 1.000003] joy0: AZT1015 PnP SOUND DEVICE GAME PORT [ 1.000003] joy0: joystick not connected [ 1.000003] isapnp0: <AZT1015 PnP SOUND DEVICE, AZT4000, , MODEM DISABLED> irq 0 not configured [ 1.000003] isapnp0: <AZT1015 PnP SOUND DEVICE, AZT5001, , EEPROM> port 0x100/1 not configured [ 1.011287] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.011287] timecounter: Timecounter "TSC" frequency 200538680 Hz quality 3000 [ 1.024233] fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec [ 1.034185] uhub0 at usb0: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.034185] uhub0: 2 ports with 2 removable, self powered [ 4.025744] wd0 at atabus0 drive 0 [ 4.025744] wd0: <WDC WD10EZEX-08WN4A0> [ 4.025744] wd0: drive supports 16-sector PIO transfers, LBA48 addressing [ 4.025744] wd0: 931 GB, 1938021 cyl, 16 head, 63 sec, 512 bytes/sect x 1953525168 sectors (4096 bytes/physsect) [ 4.035705] wd0: 32-bit data port [ 4.035705] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) [ 4.035705] wd0(piixide0:0:0): using PIO mode 4 [ 4.035705] atapibus0 at atabus1: 2 targets [ 4.045639] cd0 at atapibus0 drive 0: <CRD-8160B, 1997/02/22, 1.08> cdrom removable [ 4.045639] cd0: 32-bit data port [ 4.045639] cd0: drive supports PIO mode 4, DMA mode 2 [ 4.045639] cd0(piixide0:1:0): using PIO mode 4 [ 4.045639] swwdog0: software watchdog initialized [ 4.154929] boot device: wd0 [ 4.154929] root on wd0a dumps on wd0b [ 4.164908] root file system type: ffs [ 4.164908] kern.module.path=/stand/i386/10.0/modules [ 4.174854] WARNING: preposterous TOD clock time [ 4.174854] WARNING: using filesystem time [ 4.175929] WARNING: CHECK AND RESET THE DATE! [ 5.606037] axe0 at uhub0 port 1 [ 5.606037] axe0: Apple Computer (0x05ac) Apple USB to Ethernet (0x1402), rev 2.00/0.01, addr 2 [ 6.162594] ukphy0 at axe0 phy 16: Asix Semiconductor AX88772A internal PHY (OUI 0x007063, model 0x0006), rev. 1 [ 6.222220] ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 6.222220] axe0: Ethernet address [_MAC_XXXXXXXXXX]