Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-01-03 21:25:21
From: mr
Description: FreeBSD/amd64 on Intel Corporation NUC6CAYH
Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.4-RELEASE-p1 GENERIC amd64 FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) VT(efifb): resolution 3840x2160 CPU: Intel(R) Celeron(R) CPU J3455 @ 1.50GHz (1497.60-MHz K8-class CPU) Origin="GenuineIntel" Id=0x506c9 Family=0x6 Model=0x5c Stepping=9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4ff8ebb7<SSE3,PCLMULQDQ,DTES64,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x101<LAHF,Prefetch> Structured Extended Features=0x2294e283<FSGSBASE,TSCADJ,SMEP,ERMS,NFPUSG,MPX,PQE,RDSEED,SMAP,CLFLUSHOPT,PROCTRACE,SHA> Structured Extended Features3=0x2c000000<IBPB,STIBP,ARCH_CAP> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> IA32_ARCH_CAPS=0x1<RDCL_NO> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8077688832 (7703 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <INTEL NUC6CAYB> WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. ioapic0 <Version 2.0> irqs 0-119 Launching APs: 3 2 1 random: entropy device external interface kbd1 at kbdmux0 efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s smbios0: <System Management BIOS> at iomem 0x79aa4000-0x79aa401e smbios0: Version: 3.0, BCD Revision: 3.0 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> acpi0: <INTEL> acpi0: Power Button (fixed) unknown: I/O range not supported cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 Timecounter "HPET" frequency 19200000 Hz quality 950 Event timer "HPET" frequency 19200000 Hz quality 550 Event timer "HPET1" frequency 19200000 Hz quality 440 Event timer "HPET2" frequency 19200000 Hz quality 440 Event timer "HPET3" frequency 19200000 Hz quality 440 Event timer "HPET4" frequency 19200000 Hz quality 440 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x40> port 0x62,0x66 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0x90000000-0x90ffffff,0x80000000-0x8fffffff irq 19 at device 2.0 on pci0 vgapci0: Boot video device hdac0: <Intel Broxton-P HDA Controller> mem 0x91310000-0x91313fff,0x91000000-0x910fffff irq 25 at device 14.0 on pci0 pci0: <simple comms> at device 15.0 (no driver attached) ahci0: <Intel Apollo Lake AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0x91314000-0x91315fff,0x91324000-0x913240ff,0x91323000-0x913237ff irq 19 at device 18.0 on pci0 ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 pcib1: <ACPI PCI-PCI bridge> irq 22 at device 19.0 on pci0 pci1: <ACPI PCI bus> on pcib1 rtsx0: <2.1g Realtek RTS5229 PCIe SD Card Reader> mem 0x91200000-0x91200fff irq 22 at device 0.0 on pci1 rtsx0: No card is detected pcib2: <ACPI PCI-PCI bridge> irq 20 at device 19.2 on pci0 pci2: <ACPI PCI bus> on pcib2 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0x91104000-0x91104fff,0x91100000-0x91103fff irq 20 at device 0.0 on pci2 re0: Using 1 MSI-X message re0: ASPM disabled re0: Chip rev. 0x54000000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 xhci0: <Intel Apollo Lake USB 3.0 controller> mem 0x91300000-0x9130ffff irq 17 at device 21.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 uart2: <Intel Apollo Lake SIO/LPSS UART 0> mem 0x91320000-0x91320fff,0x9131f000-0x9131ffff irq 4 at device 24.0 on pci0 pci0: <serial bus> at device 26.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15. est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounter "TSC" frequency 1497599766 Hz quality 1000 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) hdacc0: <Realtek ALC283 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC283 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC283 (Analog)> at nid 27 and 18 on hdaa0 pcm1: <Realtek ALC283 (Front Analog)> at nid 33 and 25 on hdaa0 pcm2: <Realtek ALC283 (Internal Digital)> at nid 30 on hdaa0 hdacc1: <Intel Broxton HDA CODEC> at cad 2 on hdac0 hdaa1: <Intel Broxton Audio Function Group> at nid 1 on hdacc1 pcm3: <Intel Broxton (HDMI/DP 8ch)> at nid 3 on hdaa1 ugen0.1: <Intel XHCI root HUB> at usbus0 uhub0 on usbus0 uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 Trying to mount root from zfs:zroot/ROOT/default []... ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <WDC WDS240G2G0A-00JH30 UF300000> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 228944MB (468877312 512 byte sectors) ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN> uhub0: 15 ports with 15 removable, self powered Root mount waiting for: usbus0 ugen0.2: <vendor 0x1a40 USB 2.0 Hub> at usbus0 uhub1 on uhub0 uhub1: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 1> on usbus0 uhub1: 4 ports with 4 removable, self powered Root mount waiting for: usbus0 ugen0.3: <vendor 0x0c45 product 0x7403> at usbus0 ukbd0 on uhub1 ukbd0: <vendor 0x0c45 product 0x7403, class 0/0, rev 2.00/0.01, addr 2> on usbus0 kbd2 at ukbd0 ugen0.4: <vendor 0x8087 product 0x0aa7> at usbus0 ig4iic0: <Intel Apollo Lake I2C Controller-0> mem 0x91322000-0x91322fff,0x91321000-0x91321fff irq 27 at device 22.0 on pci0 ig4iic0: Using MSI iicbus0: <Philips I2C bus (ACPI-hinted)> on ig4iic0 ichsmb0: <Intel Broxton SMBus controller> port 0xf040-0xf05f mem 0x91316000-0x913160ff at device 31.1 on pci0 pcib0: no PRT entry for 0.31.INTA ichsmb0: can't get IRQ device_attach: ichsmb0 attach returned 6 ichsmb0: <Intel Broxton SMBus controller> port 0xf040-0xf05f mem 0x91316000-0x913160ff at device 31.1 on pci0 pcib0: no PRT entry for 0.31.INTA ichsmb0: can't get IRQ device_attach: ichsmb0 attach returned 6 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: Embedded MOF found ACPI: \134AMW0.WQBA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) Cuse v0.1.37 @ /dev/cuse lo0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP ums0 on uhub1 ums0: <vendor 0x0c45 product 0x7403, class 0/0, rev 2.00/0.01, addr 2> on usbus0 ums0: 5 buttons and [XYZ] coordinates ID=1 ugen0.4: <vendor 0x8087 product 0x0aa7> at usbus0 (disconnected) ugen0.4: <vendor 0x8087 product 0x0aa7> at usbus0 ng_ubt: HCI command 0x0c03 timed out ng_ubt: HCI command 0x0c03 timed out