Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-01-06 03:14:11
From: idatum
Description: NetBSD 10.1 on a PINE64 RockPro64 4gb
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
2024
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 10.1 (GENERIC64) #0: Mon Dec 16 13:08:11 UTC 2024
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/evbarm/compile/GENERIC64
total memory = 3947 MB
avail memory = 3804 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
armfdt0 (root)
simplebus0 at armfdt0: Pine64 RockPro64 v2.1
cpus0 at simplebus0
psci0 at simplebus0: PSCI 1.0
simplebus1 at simplebus0
cpu0 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x0
cpu0: package 0, core 0, smt 0
cpu0: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
cpu0: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
cpu0: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1
cpu0: L1 32KB/64B 2-way (256 set) VIPT Instruction cache
cpu0: L1 32KB/64B 4-way (128 set) PIPT Data cache
cpu0: L2 512KB/64B 16-way (512 set) PIPT Unified cache
cpu0: revID=0x180, PMCv3, 4k table, 64k table, 16bit ASID
cpu0: auxID=0x11120, GICv3, FP, CRC32, SHA1, SHA256, AES+PMULL, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
cpufreqdt0 at cpu0
cpu1 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x1
cpu1: package 0, core 1, smt 0
cpu1: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
cpu1: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
cpu1: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1
cpu1: L1 32KB/64B 2-way (256 set) VIPT Instruction cache
cpu1: L1 32KB/64B 4-way (128 set) PIPT Data cache
cpu1: L2 512KB/64B 16-way (512 set) PIPT Unified cache
cpu1: revID=0x180, PMCv3, 4k table, 64k table, 16bit ASID
cpu1: auxID=0x11120, GICv3, FP, CRC32, SHA1, SHA256, AES+PMULL, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
cpufreqdt1 at cpu1
cpu2 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x2
cpu2: package 0, core 2, smt 0
cpu2: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
cpu2: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
cpu2: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1
cpu2: L1 32KB/64B 2-way (256 set) VIPT Instruction cache
cpu2: L1 32KB/64B 4-way (128 set) PIPT Data cache
cpu2: L2 512KB/64B 16-way (512 set) PIPT Unified cache
cpu2: revID=0x180, PMCv3, 4k table, 64k table, 16bit ASID
cpu2: auxID=0x11120, GICv3, FP, CRC32, SHA1, SHA256, AES+PMULL, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
cpufreqdt2 at cpu2
cpu3 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x3
cpu3: package 0, core 3, smt 0
cpu3: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
cpu3: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
cpu3: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1
cpu3: L1 32KB/64B 2-way (256 set) VIPT Instruction cache
cpu3: L1 32KB/64B 4-way (128 set) PIPT Data cache
cpu3: L2 512KB/64B 16-way (512 set) PIPT Unified cache
cpu3: revID=0x180, PMCv3, 4k table, 64k table, 16bit ASID
cpu3: auxID=0x11120, GICv3, FP, CRC32, SHA1, SHA256, AES+PMULL, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
cpufreqdt3 at cpu3
cpu4 at cpus0: Arm Cortex-A72 r0p2 (v8-A), id 0x100
cpu4: package 1, core 0, smt 0
cpu4: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
cpu4: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
cpu4: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1
cpu4: L1 48KB/64B 3-way (256 set) PIPT Instruction cache
cpu4: L1 32KB/64B 2-way (256 set) PIPT Data cache
cpu4: L2 1024KB/64B 16-way (1024 set) PIPT Unified cache
cpu4: revID=0x4, PMCv3, 4k table, 64k table, 16bit ASID
cpu4: auxID=0x11120, GICv3, FP, CRC32, SHA1, SHA256, AES+PMULL, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
cpufreqdt4 at cpu4
cpu5 at cpus0: Arm Cortex-A72 r0p2 (v8-A), id 0x101
cpu5: package 1, core 1, smt 0
cpu5: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
cpu5: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
cpu5: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1
cpu5: L1 48KB/64B 3-way (256 set) PIPT Instruction cache
cpu5: L1 32KB/64B 2-way (256 set) PIPT Data cache
cpu5: L2 1024KB/64B 16-way (1024 set) PIPT Unified cache
cpu5: revID=0x4, PMCv3, 4k table, 64k table, 16bit ASID
cpu5: auxID=0x11120, GICv3, FP, CRC32, SHA1, SHA256, AES+PMULL, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
cpufreqdt5 at cpu5
gicvthree0 at simplebus0: GICv3
gicvthree0: buggy RK3399 firmware detected; applying workaround
gicvthree0: iidr 0x0001143b, cpuif non-secure, dist non-secure, priority shift 3, pmr shift 4, quirks 0x1
gicvthree0: ITS [#0] Devices table @ 0x271000/0x80000, Non-cacheable, Non-shareable
gicvthree0: ITS @ 0xfee20000
syscon0 at simplebus0: System Controller Registers
syscon1 at simplebus0: System Controller Registers
fclock0 at simplebus0: 125000000 Hz fixed clock (clkin_gmac)
syscon2 at simplebus0: System Controller Registers
syscon3 at simplebus0: System Controller Registers
syscon4 at simplebus0: System Controller Registers
syscon5 at simplebus0: System Controller Registers
syscon6 at simplebus0: System Controller Registers
syscon7 at simplebus0: System Controller Registers
syscon8 at simplebus0: System Controller Registers
syscon9 at simplebus0: System Controller Registers
syscon10 at simplebus0: System Controller Registers
syscon11 at simplebus0: System Controller Registers
syscon12 at simplebus0: System Controller Registers
syscon13 at simplebus0: System Controller Registers
syscon14 at simplebus0: System Controller Registers
syscon15 at simplebus0: System Controller Registers
syscon16 at simplebus0: System Controller Registers
syscon17 at simplebus0: System Controller Registers
syscon18 at simplebus0: System Controller Registers
syscon19 at simplebus0: System Controller Registers
syscon20 at simplebus0: System Controller Registers
syscon21 at simplebus0: System Controller Registers
syscon22 at simplebus0: System Controller Registers
syscon23 at simplebus0: System Controller Registers
fclock1 at simplebus0: 24000000 Hz fixed clock (xin24m)
syscon24 at simplebus0: System Controller Registers
syscon25 at simplebus0: System Controller Registers
syscon26 at simplebus0: System Controller Registers
syscon27 at simplebus0: System Controller Registers
rkcru0 at simplebus0: RK3399 CRU
rkcru1 at simplebus0: RK3399 PMU CRU
gtmr0 at simplebus0: Generic Timer
gtmr0: interrupting on GICv3 irq 27
armgtmr0 at gtmr0: Generic Timer (24000 kHz, virtual)
timecounter: Timecounter "armgtmr0" frequency 24000000 Hz quality 500
rkiomux0 at simplebus0: RK3399 IOMUX control
rkgpio0 at rkiomux0: GPIO (gpio0@ff720000)
gpio0 at rkgpio0: 32 pins
rkgpio1 at rkiomux0: GPIO (gpio1@ff730000)
gpio1 at rkgpio1: 32 pins
rkgpio2 at rkiomux0: GPIO (gpio2@ff780000)
gpio2 at rkgpio2: 32 pins
rkgpio3 at rkiomux0: GPIO (gpio3@ff788000)
gpio3 at rkgpio3: 32 pins
rkgpio4 at rkiomux0: GPIO (gpio4@ff790000)
gpio4 at rkgpio4: 32 pins
rkpwm0 at simplebus0: PWM
rkpwm1 at simplebus0: PWM
rkpwm2 at simplebus0: PWM
rkiic0 at simplebus0: Rockchip I2C (400000 Hz)
iic0 at rkiic0: I2C bus
rkpmic0 at iic0 addr 0x1b: RK808 Power Management and Real Time Clock IC
rkreg0 at rkpmic0: vdd_center
rkreg1 at rkpmic0: vdd_cpu_l
rkreg2 at rkpmic0: vcc_ddr
rkreg3 at rkpmic0: vcc_1v8
rkreg4 at rkpmic0: vcc1v8_dvp
rkreg5 at rkpmic0: vcc3v0_touch
rkreg6 at rkpmic0: vcca_1v8
rkreg7 at rkpmic0: vcc_sdio
rkreg8 at rkpmic0: vcca3v0_codec
rkreg9 at rkpmic0: vcc_1v5
rkreg10 at rkpmic0: vcca1v8_codec
rkreg11 at rkpmic0: vcc_3v0
rkreg12 at rkpmic0: vcc3v3_s3
rkreg13 at rkpmic0: vcc3v3_s0
fan53555reg0 at iic0 addr 0x40: Silergy SYR82X
fan53555reg1 at iic0 addr 0x41: Silergy SYR82X
fregulator0 at simplebus0: vcc12v_dcin
fregulator1 at simplebus0: vcc3v3_pcie
fregulator2 at simplebus0: vcc3v0_sd
fregulator3 at simplebus0: vcc1v8_s3
fregulator4 at simplebus0: vcc3v3_sys
fregulator5 at simplebus0: vcc5v0_sys
fregulator6 at simplebus0: vcc5v0_typec
fregulator7 at simplebus0: vcc5v0_host
rkiic1 at simplebus0: Rockchip I2C (100000 Hz)
iic1 at rkiic1: I2C bus
es8316ac0 at iic1 addr 0x11: Everest Semi ES8316 Audio CODEC
rkiic2 at simplebus0: Rockchip I2C (100000 Hz)
iic2 at rkiic2: I2C bus
fregulator8 at simplebus0: vcc5v0_usb
com0 at simplebus0: DesignWare APB UART, 64-byte FIFO
com0: interrupting on GICv3 irq 131
com1 at simplebus0: DesignWare APB UART, 64-byte FIFO
com1: console
com1: interrupting on GICv3 irq 132
rkiic3 at simplebus0: Rockchip I2C (100000 Hz)
iic3 at rkiic3: I2C bus
typec-portc (fcs,fusb302) at iic3 addr 0x22 not configured
pregulator0 at simplebus0: vdd_log
mmcpwrseq0 at simplebus0: Simple MMC power sequence provider
rkdrm0 at simplebus0
rkpciephy0 at syscon0: RK3399 PCIe PHY
rkusb0 at syscon0: USB2 PHY
rkusbphy0 at rkusb0: USB2 host port
rkusbphy1 at rkusb0: USB2 OTG port
rkusb1 at syscon0: USB2 PHY
rkusbphy2 at rkusb1: USB2 host port
rkusbphy3 at rkusb1: USB2 OTG port
/opp-table0 at simplebus0 not configured
/opp-table1 at simplebus0 not configured
rkvop0 at simplebus0: RK3399 VOPL
rkvop0: interrupting on GICv3 irq 151
rkvop1 at simplebus0: RK3399 VOPB
rkvop1: interrupting on GICv3 irq 150
rkpcie0 at simplebus0: RK3399 PCIe
rkpcie0: waiting 898 extra ms for reset (already waited 102)
rkpcie0: MMIO (32-bit non-prefetchable): 0xfa000000+0x1e00000@0xfa000000
rkpcie0: IO: 0xfbe00000+0x100000@0xfbe00000
pci0 at rkpcie0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
ppb0 at pci0 dev 0 function 0: vendor 1d87 product 0100 (rev. 0x00)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
nvme0 at pci1 dev 0 function 0: vendor 144d product a809 (rev. 0x00)
nvme0: NVMe 1.4
nvme0: for admin queue interrupting at irq 8192 (MSI-X vec 0)
nvme0: Samsung SSD 980 500GB, firmware 2B4QFXO7, serial S64ENS0TA00589K
nvme0: for io queue 1 interrupting at irq 8193 (MSI-X vec 1) affinity to cpu0
nvme0: for io queue 2 interrupting at irq 8194 (MSI-X vec 2) affinity to cpu1
nvme0: for io queue 3 interrupting at irq 8195 (MSI-X vec 3) affinity to cpu2
nvme0: for io queue 4 interrupting at irq 8196 (MSI-X vec 4) affinity to cpu3
nvme0: for io queue 5 interrupting at irq 8197 (MSI-X vec 5) affinity to cpu4
nvme0: for io queue 6 interrupting at irq 8198 (MSI-X vec 6) affinity to cpu5
ld4 at nvme0 nsid 1
ld4: 465 GB, 60801 cyl, 255 head, 63 sec, 512 bytes/sect x 976773168 sectors
/power-management@ff310000/power-controller at syscon1 not configured
rkemmcphy0 at syscon0: eMMC PHY
/phy@ff7c0000 at simplebus0 not configured
/phy@ff800000 at simplebus0 not configured
rki2s0 at simplebus0: I2S/PCM controller
rki2s0: interrupting on GICv3 irq 72
/dma-controller@ff6e0000 at simplebus0 not configured
/dma-controller@ff6d0000 at simplebus0 not configured
rktsadc0 at simplebus0: RK3399 Temperature Sensor ADC
rktsadc0: interrupting on GICv3 irq 129
/gpu@ff9a0000 at simplebus0 not configured
/iommu@ff650800 at simplebus0 not configured
/iommu@ff660480 at simplebus0 not configured
sdhc0 at simplebus0: Arasan SDHCI controller
sdhc0: interrupting on GICv3 irq 43
sdhc0: SDHC 3.0, rev 16, caps <44edc880/800020f7>, 32-bit ADMA2, 200000 kHz, embedded slot, HS SDR50 DDR50 SDR104 HS200 1.8V, re-tuning mode 1, 1024 byte blocks
sdmmc0 at sdhc0 slot 0
spdiftx0 at simplebus0: SPDIF transmitter
/iommu@ff8f3f00 at simplebus0 not configured
dwhdmi0 at simplebus0: HDMI TX
dwhdmi0: version 2.11a, phytype 0xf3
/iommu@ff903f00 at simplebus0 not configured
/iommu@ff914000 at simplebus0 not configured
rki2s1 at simplebus0: I2S/PCM controller
rki2s1: interrupting on GICv3 irq 73
/opp-table2 at simplebus0 not configured
awge0 at simplebus0: GMAC
awge0: Core version: 00001035
awge0: Ethernet address [_MAC_XXXXXXXXXX]
awge0: HW feature mask: d0f17
rgephy0 at awge0 phy 0: RTL8211F 1000BASE-T media interface
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
rgephy1 at awge0 phy 1: RTL8211F 1000BASE-T media interface
rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto
awge0: interrupting on GICv3 irq 44
dwcmmc0 at simplebus0: DesignWare SD/MMC
dwcmmc0: interrupting on GICv3 irq 96
dwcmmc1 at simplebus0: DesignWare SD/MMC
dwcmmc1: interrupting on GICv3 irq 97
ehci0 at simplebus0: EHCI
ehci0: interrupting on GICv3 irq 58
ehci0: EHCI version 1.0
ehci0: 1 companion controller, 1 port
ehci0: Using DMA subregion for control data structures
usb0 at ehci0: USB revision 2.0
ohci0 at simplebus0: OHCI
ohci0: interrupting on GICv3 irq 60
ohci0: OHCI version 1.0
usb1 at ohci0: USB revision 1.0
ehci1 at simplebus0: EHCI
ehci1: interrupting on GICv3 irq 62
ehci1: EHCI version 1.0
ehci1: 1 companion controller, 1 port
ehci1: Using DMA subregion for control data structures
usb2 at ehci1: USB revision 2.0
ohci1 at simplebus0: OHCI
ohci1: interrupting on GICv3 irq 64
ohci1: OHCI version 1.0
usb3 at ohci1: USB revision 1.0
xhci0 at simplebus0: DesignWare USB3 XHCI (rev. 3.00a)
xhci0: interrupting on GICv3 irq 137
xhci0: xHCI version 1.10
usb4 at xhci0: USB revision 3.0
usb5 at xhci0: USB revision 2.0
xhci1 at simplebus0: DesignWare USB3 XHCI (rev. 3.00a)
xhci1: interrupting on GICv3 irq 142
xhci1: xHCI version 1.10
usb6 at xhci1: USB revision 3.0
usb7 at xhci1: USB revision 2.0
/saradc@ff100000 at simplebus0 not configured
rkspi0 at simplebus0: SPI
rkspi0: interrupting on GICv3 irq 85
spi0 at rkspi0: SPI bus
m25p0 at spi0 slave 0
/syscon@ff320000/io-domains at syscon23 not configured
/video-codec@ff650000 at simplebus0 not configured
/video-codec@ff660000 at simplebus0 not configured
/rga@ff680000 at simplebus0 not configured
/efuse@ff690000 at simplebus0 not configured
/syscon@ff770000/io-domains at syscon0 not configured
/rktimer@ff850000 at simplebus0 not configured
rki2s2 at simplebus0: I2S/PCM controller
rki2s2: interrupting on GICv3 irq 71
/iommu@ff924000 at simplebus0 not configured
ausoc0 at simplebus0: hdmi-sound
gpioleds0 at simplebus0: work diy
pwmfan0 at simplebus0autoconfiguration error: : couldn't get 'cooling-levels' property
rkv1crypto0 at simplebus0: Crypto v1
entropy: ready
armpmu0 at simplebus0: Performance Monitor Unit
armpmu1 at simplebus0: Performance Monitor Unit
dwcwdt0 at simplebus0: DesignWare Watchdog Timer
dwcwdt0: default watchdog period is 15 seconds
gpiokeys0 at simplebus0: GPIO Key Power
/ir-receiver at simplebus0 not configured
/sound at simplebus0 not configured
/sound-dit at simplebus0 not configured
rkdrm0: reserved 40 MB DRAM for CMA
rkfb0 at rkdrm0
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] No driver support for vblank timestamp query.
[drm] Initialized rk 1.0.0 20191109 for rkdrm0 on minor 0
rkdrm0: initialized rk 1.0.0 20191109 on minor 0
rkfb0: framebuffer at 0x4e9000, size 1920x1080, depth 32, stride 7680
warning: /usr/src/sys/external/bsd/drm2/dist/drm/drm_atomic_helper.c:1497: [CRTC:33:crtc-0] vblank wait timed out
wsdisplay0 at rkfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-3 added (default, vt100 emulation)
ausoc0: codec: dwhdmi0, cpu: rki2s1
audio0 at ausoc0: playback, capture, full duplex
audio0: slinear_le:16 -> slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
cpufreqdt0: rate: 1416.000 MHz, 1125000 uV
cpufreqdt4: rate: 1800.000 MHz, 1200000 uV
sdmmc1 at dwcmmc0
sdmmc2 at dwcmmc1
uhub0 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
uhub1 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 1 port with 1 removable, self powered
uhub2 at usb4: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
uhub2: 1 port with 1 removable, self powered
uhub3 at usb5: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
uhub3: 1 port with 1 removable, self powered
uhub4 at usb6: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
uhub4: 1 port with 1 removable, self powered
uhub5 at usb7: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
uhub5: 1 port with 1 removable, self powered
m25p0: JEDEC ID mfgid:0xC8, devid:0x4018
spiflash0 at m25p0: GigaDevice 25Q127CSIG SPI flash
spiflash0: 16384 KB, 256 sectors of 64 KB each
uhub6 at usb3: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub6: 1 port with 1 removable, self powered
uhub7 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub7: 1 port with 1 removable, self powered
armpmu0: interrupting on GICv3 irq 23
armpmu1: autoconfiguration error: couldn't initialise PMU event counterIPsec: Initialized Security Association Processing.
sdmmc1: autoconfiguration error: couldn't enable card: 60
sdhc0: autoconfiguration error: timeout waiting for mask 0x3 value 0 (state=0x1fff0a06)
sdhc0: command or data phase inhibited
sdhc0: autoconfiguration error: tuning did not complete, using fixed sampling clock
ld0 at sdmmc0: <0x45:0x0100:DA4064:0x00:0x5e2c1724:0x000>
ld0: 59640 MB, 7603 cyl, 255 head, 63 sec, 512 bytes/sect x 122142720 sectors
ld0: GPT GUID: 11905bbc-a05e-463d-9f11-7d3df52fa20d
dk0 at ld0: "EFI", 163840 blocks at 32768, type: msdos
dk1 at ld0: "netbsd-root", 121937920 blocks at 196608, type: ffs
ld0: 8-bit width, HS200, 4096 KB cache, 200.000 MHz
uhub8 at uhub5 port 1: vendor 214b (0x214b) USB2.0 HUB (0x7250), class 9/0, rev 2.00/1.00, addr 1
uhub8: single transaction translator
uhub8: 4 ports with 4 removable, self powered
ugen0 at uhub3 port 1
ugen0: American Power Conversion (0x051d) Back-UPS ES 600M1 FW:928.a8 .D USB FW:a8 (0x0002), rev 2.00/0.90, addr 1
uaudio0 at uhub8 port 1 configuration 1 interface 0
uaudio0: Generic (0x1908) USB2.0 Device (0x2070), rev 1.10/1.00, addr 2
uaudio0: audio rev 1.00
audio1 at uaudio0: playback
audio1: slinear_le:16 2ch 48000Hz, blk 11520 bytes (60ms) for playback
spkr1 at audio1: PC Speaker (synthesized)
wsbell at spkr1 not configured
uhidev0 at uhub8 port 1 configuration 1 interface 2
uhidev0: Generic (0x1908) USB2.0 Device (0x2070), rev 1.10/1.00, addr 2, iclass 3/0
uhid0 at uhidev0: input=1, output=0, feature=0
ubt0 at uhub8 port 2
ubt0: Realtek (0x7392) Bluetooth Radio (0xc611), rev 1.10/2.00, addr 3
swwdog0: software watchdog initialized
WARNING: 5 errors while detecting hardware; check system log.
boot device: dk1
root on dk1
root file system type: ffs
kern.module.path=/stand/evbarm/10.1/modules
ZFS filesystem version: 5
wsdisplay0: screen 4 added (default, vt100 emulation)