Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-01-20 07:38:25
From: rxg
Description: NetBSD 10.0 on Embest MarS Board i.MX6Dual
[ 1.0000000] NetBSD/evbarm (fdt) booting ... [ 1.0000000] [ Kernel symbol table missing! ] PSCI: no /psci node found arm_fdt_cpu_mpstart: failed to enable CPU 0x1 arm_fdt_cpu_mpstart: failed to enable CPU 0x2 arm_fdt_cpu_mpstart: failed to enable CPU 0x3 [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.0000000] 2024 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.0 (GENERIC) #0: Sun Jan 19 08:53:44 CST 2025 [ 1.0000000] rxg@picohive:/home/rxg/10.0/usr/obj.evbarm/sys/arch/evbarm/compile/GENERIC [ 1.0000000] total memory = 1024 MB [ 1.0000000] avail memory = 988 MB [ 1.0000000] armfdt0 (root) [ 1.0000000] simplebus0 at armfdt0: Embest MarS Board i.MX6Dual [ 1.0000000] simplebus1 at simplebus0 [ 1.0000000] cpus0 at simplebus0 [ 1.0000000] simplebus2 at simplebus0 [ 1.0000000] simplebus3 at simplebus0 [ 1.0000000] cpu0 at cpus0: Cortex-A9 r2p10 (Cortex V7A core) [ 1.0000000] cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled [ 1.0000000] cpu0: L1 32KB/32B 4-way (256 set) VIPT Instruction cache [ 1.0000000] cpu0: L1 32KB/32B 4-way (256 set) write-back-locking-C PIPT Data cache [ 1.0000000] cpu0: L2 1024KB/32B 16-way (2048 set) write-back-locking-D PIPT Unified cache [ 1.0000000] vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals [ 1.0000000] cpufreqdt0 at cpu0 [ 1.0000000] cpu1 at cpus0: Cortex-A9 r2p10 (Cortex V7A core) [ 1.0000000] cpu1: DC enabled IC enabled WB enabled LABT branch prediction enabled [ 1.0000000] cpu1: L1 32KB/32B 4-way (256 set) VIPT Instruction cache [ 1.0000000] cpu1: L1 32KB/32B 4-way (256 set) write-back-locking-C PIPT Data cache [ 1.0000000] cpu1: L2 1024KB/32B 16-way (2048 set) write-back-locking-D PIPT Unified cache [ 1.0000000] vfp1 at cpu1: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals [ 1.0000000] cpufreqdt1 at cpu1 [ 1.0000000] cpu2 at cpus0: disabled (unresponsive) [ 1.0000000] cpufreqdt2 at cpu2 [ 1.0000000] cpu3 at cpus0: disabled (unresponsive) [ 1.0000000] cpufreqdt3 at cpu3 [ 1.0000000] simplebus4 at simplebus1 [ 1.0000000] simplebus5 at simplebus1 [ 1.0000000] simplebus6 at simplebus4 [ 1.0000000] syscon0 at simplebus4: System Controller Registers [ 1.0000000] imx6ccm0 at simplebus4: Clock Control Module [ 1.0000000] gic0 at simplebus1: GIC [ 1.0000000] armgic0 at gic0: Generic Interrupt Controller, 160 sources (149 valid) [ 1.0000000] armgic0: 32 Priorities, 128 SPIs, 5 PPIs, 16 SGIs [ 1.0000000] syscon1 at simplebus4: System Controller Registers [ 1.0000000] imxsnvs0 at simplebus4: Secure Non-Volatile Storage [ 1.0000000] fclock0 at simplebus3: 32768 Hz fixed clock (ckil) [ 1.0000000] fclock1 at simplebus3: 0 Hz fixed clock (ckih1) [ 1.0000000] fclock2 at simplebus3: 24000000 Hz fixed clock (osc) [ 1.0000000] imxgpc0 at simplebus4: General Power Controller [ 1.0000000] imxiomux0 at simplebus4: IOMUX Controller [ 1.0000000] imxocotp0 at simplebus5: On-Chip OTP Controller [ 1.0000000] imxocotp0: OCOTP_VERSION 2.0.0 [ 1.0000000] l2cc0 at simplebus1 [ 1.0000000] arml2cc0 at l2cc0: ARM PL310 r3p1a L2 Cache Controller (disabled) [ 1.0000000] arml2cc0: cache enabled [ 1.0000000] a9ptmr0 at simplebus1 [ 1.0000000] a9ptmr0: interrupting on GIC irq 29 [ 1.0000000] arma9ptmr0 at a9ptmr0: A9 Private Timer (396 MHz) [ 1.0000000] imxgpio0 at simplebus4: GPIO (gpio@20a0000) [ 1.0000000] imxgpio0: interrupting on irq 100 [ 1.0000000] imxgpio0: interrupting on irq 101 [ 1.0000000] imxgpio0: interrupts 160..191 [ 1.0000000] gpio0 at imxgpio0: 32 pins [ 1.0000000] imxgpio1 at simplebus4: GPIO (gpio@209c000) [ 1.0000000] imxgpio1: interrupting on irq 98 [ 1.0000000] imxgpio1: interrupting on irq 99 [ 1.0000000] imxgpio1: interrupts 192..223 [ 1.0000000] gpio1 at imxgpio1: 32 pins [ 1.0000000] imxgpio2 at simplebus4: GPIO (gpio@20a4000) [ 1.0000000] imxgpio2: interrupting on irq 102 [ 1.0000000] imxgpio2: interrupting on irq 103 [ 1.0000000] imxgpio2: interrupts 224..255 [ 1.0000000] gpio2 at imxgpio2: 32 pins [ 1.0000000] imxgpio3 at simplebus4: GPIO (gpio@20ac000) [ 1.0000000] imxgpio3: interrupting on irq 106 [ 1.0000000] imxgpio3: interrupting on irq 107 [ 1.0000000] imxgpio3: interrupts 256..287 [ 1.0000000] gpio3 at imxgpio3: 32 pins [ 1.0000000] imxgpio4 at simplebus4: GPIO (gpio@20a8000) [ 1.0000000] imxgpio4: interrupting on irq 104 [ 1.0000000] imxgpio4: interrupting on irq 105 [ 1.0000000] imxgpio4: interrupts 288..319 [ 1.0000000] gpio4 at imxgpio4: 32 pins [ 1.0000000] imxgpio5 at simplebus4: GPIO (gpio@20b0000) [ 1.0000000] imxgpio5: interrupting on irq 108 [ 1.0000000] imxgpio5: interrupting on irq 109 [ 1.0000000] imxgpio5: interrupts 320..351 [ 1.0000000] gpio5 at imxgpio5: 32 pins [ 1.0000000] imxgpio6 at simplebus4: GPIO (gpio@20b4000) [ 1.0000000] imxgpio6: interrupting on irq 110 [ 1.0000000] imxgpio6: interrupting on irq 111 [ 1.0000000] imxgpio6: interrupts 352..383 [ 1.0000000] gpio6 at imxgpio6: 32 pins [ 1.0000000] imxi2c0 at simplebus5 [ 1.0000000] iic0 at imxi2c0: I2C bus [ 1.0000000] imxuart0 at simplebus6, 80000000 Hz [ 1.0000000] imxuart0: interrupting on irq 58 [ 1.0000000] imxi2c1 at simplebus5 [ 1.0000000] iic1 at imxi2c1: I2C bus [ 1.0000000] imxi2c2 at simplebus5 [ 1.0000000] iic2 at imxi2c2: I2C bus [ 1.0000000] imxuart1 at simplebus5, 80000000 Hz [ 1.0000000] imxuart1: interrupting on irq 59 [ 1.0000000] imxuart1: console [ 1.0000000] imxuart2 at simplebus5, 80000000 Hz [ 1.0000000] imxuart2: interrupting on irq 60 [ 1.0000000] imxuart3 at simplebus5, 80000000 Hz [ 1.0000000] imxuart3: interrupting on irq 61 [ 1.0000000] imxuart4 at simplebus5, 80000000 Hz [ 1.0000000] imxuart4: interrupting on irq 62 [ 1.0000000] fregulator0 at simplebus0: usb_otg_vbus [ 1.0000000] fregulator1 at simplebus0: 3P3V [ 1.0000000] imxusbphy0 at simplebus4: USB PHY [ 1.0000000] imxusbphy1 at simplebus4: USB PHY [ 1.0000000] usbnopphy0 at simplebus0: USB PHY [ 1.0000000] usbnopphy1 at simplebus0: USB PHY [ 1.0000000] /soc/ipu@2400000 at simplebus1 not configured [ 1.0000000] /soc/ipu@2800000 at simplebus1 not configured [ 1.0000000] /soc/dma-apbh@110000 at simplebus1 not configured [ 1.0000000] /soc/bus@2000000/sdma@20ec000 at simplebus4 not configured [ 1.0000000] /soc/bus@2000000/reset-controller@20d8000 at simplebus4 not configured [ 1.0000000] /soc/sram@900000 at simplebus1 not configured [ 1.0000000] /soc/bus@2000000/anatop@20c8000/regulator-vddpu at syscon1 not configured [ 1.0000000] /soc/bus@2000000/iomuxc-gpr@20e0000/mux-controller at syscon0 not configured [ 1.0000000] /soc/bus@2100000/usbmisc@2184800 at simplebus5 not configured [ 1.0000000] enet0 at simplebus5: Gigabit Ethernet Controller [ 1.0000000] enet0: interrupting on irq 150 [ 1.0000000] enet0: couldn't find phy reset gpios [ 1.0000000] enet0: cannot get mac address. set randomly [ 1.0000000] enet0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.0000000] atphy0 at enet0 phy 4: Atheros AR8035 10/100/1000 PHY, rev. 2 [ 1.0000000] atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX-FDX, 1000baseT-FDX, auto [ 1.0000000] /soc/bus@2000000/iomuxc-gpr@20e0000/ipu1_csi0_mux at syscon0 not configured [ 1.0000000] /soc/bus@2000000/iomuxc-gpr@20e0000/ipu2_csi1_mux at syscon0 not configured [ 1.0000000] dwhdmi0 at simplebus1: HDMI TX [ 1.0000000] dwhdmi0: version 1.30a, phytype 0xf2 [ 1.0000000] /soc/bus@2000000/anatop@20c8000/regulator-vddcore at syscon1 not configured [ 1.0000000] /soc/bus@2000000/anatop@20c8000/regulator-vddsoc at syscon1 not configured [ 1.0000000] armpmu0 at simplebus0: Performance Monitor Unit [ 1.0000000] /soc/gpu@130000 at simplebus1 not configured [ 1.0000000] /soc/gpu@134000 at simplebus1 not configured [ 1.0000000] imxspi0 at simplebus6: SPI [ 1.0000000] imxspi0: interrupting on irq 63 [ 1.0000000] i.MX eCSPI Controller (clock 60000000 Hz) [ 1.0000000] spi0 at imxspi0: SPI bus [ 1.0000000] slave 0 not configured [ 1.0000000] /soc/bus@2000000/spba-bus@2000000/asrc@2034000 at simplebus6 not configured [ 1.0000000] /soc/bus@2000000/vpu@2040000 at simplebus4 not configured [ 1.0000000] imxpwm0 at simplebus4imxpwm0: interrupting on irq 115 [ 1.0000000] imxpwm1 at simplebus4imxpwm1: interrupting on irq 116 [ 1.0000000] imxpwm2 at simplebus4imxpwm2: interrupting on irq 117 [ 1.0000000] imxpwm3 at simplebus4imxpwm3: interrupting on irq 118 [ 1.0000000] /soc/bus@2000000/timer@2098000 at simplebus4 not configured [ 1.0000000] imxwdog0 at simplebus4: i.MX Watchdog Timer, default period is 10 seconds [ 1.0000000] /soc/bus@2000000/anatop@20c8000/regulator-1p1 at syscon1 not configured [ 1.0000000] /soc/bus@2000000/anatop@20c8000/regulator-3p0 at syscon1 not configured [ 1.0000000] /soc/bus@2000000/anatop@20c8000/regulator-2p5 at syscon1 not configured [ 1.0000000] /soc/bus@2000000/anatop@20c8000/tempmon at syscon1 not configured [ 1.0000000] /soc/bus@2100000/crypto@2100000 at simplebus5 not configured [ 1.0000000] imxusbc0 at simplebus5 [ 1.0000000] ehci0 at imxusbc0 unit 0: i.MX USB Controller [ 1.0000000] ehci0: id=5 revision=1 HCI revision=0x100 [ 1.0000000] ehci0: 1 host port, device capable, 8 endpoints [ 1.0000000] ehci0: interrupting on irq 75 [ 1.0000000] usb0 at ehci0: USB revision 2.0 [ 1.0000000] imxusbc1 at simplebus5 [ 1.0000000] ehci1 at imxusbc1 unit 1: i.MX USB Controller [ 1.0000000] ehci1: id=5 revision=1 HCI revision=0x100 [ 1.0000000] ehci1: 1 host port [ 1.0000000] ehci1: interrupting on irq 72 [ 1.0000000] usb1 at ehci1: USB revision 2.0 [ 1.0000000] sdhc0 at simplebus5: SDMMC (198000 kHz) [ 1.0000000] sdhc0: interrupting on irq 55 [ 1.0000000] sdhc0: SDHC 3.0, rev 0, 32-bit ADMA2, 198000 kHz, HS SDR50 DDR50 1.8V 3.0V 3.3V, re-tuning mode 1, 4096 byte blocks [ 1.0000000] sdmmc0 at sdhc0 slot 0 [ 1.0000000] sdhc1 at simplebus5: SDMMC (198000 kHz) [ 1.0000000] sdhc1: interrupting on irq 56 [ 1.0000000] sdhc1: SDHC 3.0, rev 0, 32-bit ADMA2, 198000 kHz, HS SDR50 DDR50 1.8V 3.0V 3.3V, re-tuning mode 1, 4096 byte blocks [ 1.0000000] sdmmc1 at sdhc1 slot 0 [ 1.0000000] /soc/bus@2100000/memory-controller@21b0000 at simplebus5 not configured [ 1.0000000] /soc/bus@2100000/audmux@21d8000 at simplebus5 not configured [ 1.0000000] /soc/gpu@2204000 at simplebus1 not configured [ 1.0000000] /capture-subsystem at simplebus0 not configured [ 1.0000000] /display-subsystem at simplebus0 not configured [ 1.0000000] gpioleds0 at simplebus0: imx6:green:user1 imx6:green:user2 [ 1.0000000] /soc/bus@2100000/vdoa@21e4000 at simplebus5 not configured [ 1.0000050] cpufreqdt0: rate: 1200.000 MHz, 1275000 uV [ 1.0100050] cpufreqdt1: rate: 1200.000 MHz, 1275000 uV [ 1.0200050] cpufreqdt2: rate: 1200.000 MHz, 1275000 uV [ 1.0300050] cpufreqdt3: rate: 1200.000 MHz, 1275000 uV [ 1.0300050] WARNING: system needs entropy for security; see entropy(7) [ 1.0300050] armpmu0: interrupting on irq 126 [ 1.0700050] uhub0 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.0700050] uhub1 at usb1: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.2300050] sdmmc0: SD card status: 4-bit, C10, U1, V10 [ 1.2300050] ld0 at sdmmc0: <0x9f:0x5449:00000:0x00:0x00000384:0x12c> [ 1.2400050] ld0: 30168 MB, 7661 cyl, 128 head, 63 sec, 512 bytes/sect x 61784064 sectors [ 1.2700050] ld0: 4-bit width, DDR50, 50.000 MHz [ 1.2700050] ld1 at sdmmc1: <0x88:0x0103:NCard :0x00:0x44801ad1:0x000> [ 1.2800050] ld1: 3808 MB, 1934 cyl, 64 head, 63 sec, 512 bytes/sect x 7798784 sectors [ 1.2900050] ld1: 4-bit width, 52.000 MHz [ 2.1000050] uhub2 at uhub1 port 1: vendor 1a40 (0x1a40) USB 2.0 Hub [MTT] (0x0101), class 9/0, rev 2.00/1.00, addr 2 [ 2.4500050] swwdog0: software watchdog initialized [ 2.4700050] WARNING: 6 errors while detecting hardware; check system log. [ 2.4700050] boot device: ld0 [ 2.4800050] root on ld0a dumps on ld0b [ 2.4900050] root file system type: ffs [ 2.4900050] kern.module.path=/stand/evbarm/10.0/modules [ 2.5000050] WARNING: preposterous TOD clock time [ 2.5000050] WARNING: using filesystem time [ 2.5100050] WARNING: CHECK AND RESET THE DATE!