Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-04-13 14:18:52
From: Ken Wellsch
Description: OpenBSD/sparc64 7.7 on Netra T1/105 (ZuluSCSI Blaster)
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2025 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.7 (GENERIC) #2360: Thu Apr 3 21:27:15 MDT 2025
[_EMAIL_XXXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/sparc64/compile/GENERIC
real mem = 1073741824 (1024MB)
avail mem = 1036271616 (988MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: Netra t1 (UltraSPARC-IIi 440MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-IIi (rev 9.1) @ 440.040 MHz
cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 2048K external (64 b/l)
psycho0 at mainbus0 addr 0xfffc0000: SUNW,sabre, impl 0, version 0, ign 7c0
psycho0: bus range 0-3, PCI bus 0
psycho0: dvma map c0000000-dfffffff
pci0 at psycho0
ppb0 at pci0 dev 1 function 1 "Sun Simba" rev 0x13
pci1 at ppb0 bus 1
ebus0 at pci1 dev 1 function 0 "Sun PCIO EBus2" rev 0x01
auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 72c000-72c003, 72f000-72f003
power0 at ebus0 addr 724000-724003 ivec 0x25
"SUNW,pll" at ebus0 addr 504000-504002 not configured
com0 at ebus0 addr 3803f8-3803ff ivec 0x1c: ns16550a, 16 byte fifo
com0: console
com1 at ebus0 addr 3602f8-3602ff ivec 0x14: ns16550a, 16 byte fifo
lpt0 at ebus0 addr 340278-340287, 30015c-30015d, 700000-70000f ivec 0x22: polled
clock1 at ebus0 addr 0-1fff: mk48t59
"flashprom" at ebus0 addr 0-fffff not configured
"watchdog" at ebus0 addr 200000-20003f ivec 0x4 not configured
"display7seg" at ebus0 addr 200040-200040 not configured
beeper0 at ebus0 addr 722000-722003
"flashprom" at ebus0 addr 400000-5fffff not configured
"flashprom" at ebus0 addr 800000-9fffff not configured
pcfiic0 at ebus0 addr 600000-600003 ivec 0x28
iic0 at pcfiic0
pcfadc0 at iic0 addr 0x4f
"i2cpcf,8574a" at iic0 addr 0x38 not configured
"i2cpcf,8574a" at iic0 addr 0x39 not configured
pcfiic1 at ebus0 addr 100000-100003 ivec 0x1b
iic1 at pcfiic1
lom0 at ebus0 addr 400000-400063: LOMlite rev 2.2
hme0 at pci1 dev 1 function 1 "Sun HME" rev 0x01: ivec 0x7e1, address [_MAC_XXXXXXXXXX]
luphy0 at hme0 phy 0: LU6612, rev. 1
siop0 at pci1 dev 2 function 0 "Symbios Logic 53c875" rev 0x03: ivec 0x7e0, using 4K of on-board RAM
scsibus1 at siop0: 16 targets, initiator 7
sd0 at scsibus1 targ 0 lun 0: <ZULUSCSI, HARDDRIVE, 2.3B> serial.ZULUSCSIHARDDRIVE_434A5F7A
sd0: 1024MB, 512 bytes/sector, 2097152 sectors
sd1 at scsibus1 targ 1 lun 0: <ZULUSCSI, HARDDRIVE, 2.3B> serial.ZULUSCSIHARDDRIVE_434A5F7A
sd1: 4095MB, 512 bytes/sector, 8386560 sectors
sd2 at scsibus1 targ 2 lun 0: <ZULUSCSI, HARDDRIVE, 2.3B> serial.ZULUSCSIHARDDRIVE_434A5F7A
sd2: 4095MB, 512 bytes/sector, 8386560 sectors
sd3 at scsibus1 targ 3 lun 0: <ZULUSCSI, HARDDRIVE, 2.3B> serial.ZULUSCSIHARDDRIVE_434A5F7A
sd3: 4095MB, 512 bytes/sector, 8388607 sectors
cd0 at scsibus1 targ 6 lun 0: <ZULUSCSI, CDROM, 2.3B> removable serial.ZULUSCSICDROM_434A5F7A
hme1 at pci1 dev 3 function 1 "Sun HME" rev 0x01: ivec 0x7da, address [_MAC_XXXXXXXXXX]
luphy1 at hme1 phy 0: LU6612, rev. 1
ppb1 at pci0 dev 1 function 0 "Sun Simba" rev 0x13
pci2 at ppb1 bus 2
ppb2 at pci2 dev 1 function 0 "DEC 21150" rev 0x06
pci3 at ppb2 bus 3
pciide0 at pci3 dev 14 function 0 "CMD Technology PCI0646" rev 0x03: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x7c2 for native-PCI interrupt
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus2 at atapiscsi0: 2 targets
cd1 at scsibus2 targ 0 lun 0: <TOSHIBA, CD-ROM XM-7002Bc, 1110> removable
cd1(pciide0:1:0): using PIO mode 4, DMA mode 2
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
siop0: target 0 now using 8 bit 20.0 MHz 15 REQ/ACK offset xfers
siop0: target 1 now using 8 bit 20.0 MHz 15 REQ/ACK offset xfers
siop0: target 2 now using 8 bit 20.0 MHz 15 REQ/ACK offset xfers
siop0: target 3 now using 8 bit 20.0 MHz 15 REQ/ACK offset xfers
bootpath: /pci@1f,0/pci@1,1/scsi@2,0/disk@1,0
root on sd1a (e5cb7bab31185cac.a) swap on sd1b dump on sd1b
t105ob# uname -a
OpenBSD t105ob.localhost 7.7 GENERIC#2360 sparc64
t105ob# cc -v
Reading specs from /usr/lib/gcc-lib/sparc64-unknown-openbsd7.7/4.2.1/specs
Target: sparc64-unknown-openbsd7.7
Configured with: OpenBSD/sparc64 system compiler
Thread model: posix
gcc version 4.2.1 20070719
t105ob# dd if=/dev/rsd0c of=/dev/null bs=1m count=100
100+0 records in
100+0 records out
104857600 bytes transferred in 7.586 secs (13822515 bytes/sec)
t105ob# dd if=/dev/zero of=/dev/rsd0c bs=1m count=100
100+0 records in
100+0 records out
104857600 bytes transferred in 11.447 secs (9160269 bytes/sec)