Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-04-13 14:23:35
From: Ken Wellsch
Description: FreeBSD/sparc64 12.4-STABLE on Netra T1/105 (ZuluSCSI Blaster)
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.4-STABLE r373095 GENERIC sparc64
gcc version 4.2.1 20070831 patched [FreeBSD]
real memory = 1073741824 (1024 MB)
avail memory = 1028096000 (980 MB)
cpu0: Sun Microsystems UltraSparc-IIi Processor (440.04 MHz CPU)
random: unblocking device.
random: entropy device external interface
WARNING: Device "g_ctl" is Giant locked and may be deleted before FreeBSD 14.0.
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd0 at kbdmux0
WARNING: Device "pci" is Giant locked and may be deleted before FreeBSD 14.0.
[ath_hal] loaded
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 14.0.
WARNING: Device "openprom" is Giant locked and may be deleted before FreeBSD 14.0.
nexus0: <Open Firmware Nexus device>
pcib0: <U2P UPA-PCI bridge> mem 0x1fe00000000-0x1fe0000ffff,0x1fe01000000-0x1fe010000ff irq 2032,2030,2031,2021 on nexus0
pcib0: Sabre, impl 0, version 0, IGN 0x1f, bus A, 66MHz
pcib0: DVMA map: 0xc0000000 to 0xc3ffffff 8192 entries
pci0: <OFW PCI bus> on pcib0
pcib1: <APB PCI-PCI bridge> at device 1.1 on pci0
pci1: <OFW PCI bus> on pcib1
ebus0: <PCI-EBus2 bridge> mem 0xf0000000-0xf0ffffff,0xf1000000-0xf17fffff at device 1.0 on pci1
pcib2: <APB PCI-PCI bridge> at device 1.0 on pci0
pci2: <OFW PCI bus> on pcib2
pcib3: <OFW PCI-PCI bridge> at device 1.0 on pci2
pci3: <OFW PCI bus> on pcib3
auxio0: <Sun Auxiliary I/O> addr 0x1400726000-0x1400726003,0x1400728000-0x1400728003,0x140072a000-0x140072a003,0x140072c000-0x140072c003,0x140072f000-0x140072f003 on ebus0
ebus0: <power> addr 0x1400724000-0x1400724003 irq 37 (no driver attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
uart0: <16550 or compatible> addr 0x14003803f8-0x14003803ff irq 28 on ebus0
uart0: console (9600,n,8,1)
uart1: <16550 or compatible> addr 0x14003602f8-0x14003602ff irq 20 on ebus0
ebus0: <ecpp> addr 0x1400340278-0x1400340287,0x140030015c-0x140030015d,0x1400700000-0x140070000f irq 34 (no driver attached)
ebus0: <fdthree> addr 0x14003203f0-0x14003203f7,0x1400706000-0x140070600f,0x1400720000-0x1400720003 irq 39 (no driver attached)
eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: mk48txx_attach: battery low
eeprom0: cannot attach time of day clock
device_attach: eeprom0 attach returned 6
ebus0: <flashprom> addr 0x1000000000-0x10000fffff (no driver attached)
ebus0: <watchdog> addr 0x1400200000-0x140020003f irq 4 (no driver attached)
ebus0: <display7seg> addr 0x1400200040 (no driver attached)
ebus0: <beeper> addr 0x1400722000-0x1400722003 (no driver attached)
ebus0: <flashprom> addr 0x1000400000-0x10005fffff (no driver attached)
ebus0: <flashprom> addr 0x1000800000-0x10009fffff (no driver attached)
ebus0: <i2c> addr 0x1400600000-0x1400600003 irq 40 (no driver attached)
ebus0: <i2c> addr 0x1400100000-0x1400100003 irq 27 (no driver attached)
ebus0: <SUNW,lom> addr 0x1400400000-0x1400400063 (no driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0xe0000000-0xe0007fff at device 1.1 on pci1
miibus0: <MII bus> on hme0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: Ethernet address: [_MAC_XXXXXXXXXX]
hme0: Deprecated code (to be removed in FreeBSD 13): 10/100 NIC almost exclusively for sparc64
sym0: <875> port 0xc00000-0xc000ff mem 0xe0008000-0xe00080ff,0xe000a000-0xe000afff at device 2.0 on pci1
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
hme1: <Sun HME 10/100 Ethernet> mem 0xe0010000-0xe0017fff at device 3.1 on pci1
miibus1: <MII bus> on hme1
ukphy2: <Generic IEEE 802.3u media interface> PHY 0 on miibus1
ukphy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme1: Ethernet address: [_MAC_XXXXXXXXXX]
hme1: Deprecated code (to be removed in FreeBSD 13): 10/100 NIC almost exclusively for sparc64
atapci0: <SiI (CMD) 646 WDMA2 controller> port 0x1000-0x1007,0x1008-0x100b,0x1010-0x1017,0x1018-0x101b,0x1020-0x102f at device 14.0 on pci3
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
cryptosoft0: <software crypto> on nexus0
nexus0: <syscons> type unknown (no driver attached)
Timecounter "tick" frequency 440040437 Hz quality 1000
Event timer "tick" frequency 440040437 Hz quality 1000
Timecounters tick every 1.000 msec
usb_needs_explore_all: no devclass
Trying to mount root from ufs:/dev/da3a [rw]...
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
Root mount waiting for: CAM
cd0 at sym0 bus 0 scbus0 target 6 lun 0
cd0: <ZULUSCSI CDROM 2.3B> Removable CD-ROM SCSI-2 device
cd0: [_SERIAL_NUMBER_XXXXX]
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: 464MB (237568 2048 byte sectors)
da0 at sym0 bus 0 scbus0 target 0 lun 0
da0: <ZULUSCSI HARDDRIVE 2.3B> Fixed Direct Access SCSI-2 device
da0: [_SERIAL_NUMBER_XXXXX]
da0: 20.000MB/s transfers (20.000MHz, offset 15)
da0: 1024MB (2097152 512 byte sectors)
da1 at sym0 bus 0 scbus0 target 1 lun 0
da1: <ZULUSCSI HARDDRIVE 2.3B> Fixed Direct Access SCSI-2 device
da1: [_SERIAL_NUMBER_XXXXX]
da1: 20.000MB/s transfers (20.000MHz, offset 15)
da1: 4095MB (8386560 512 byte sectors)
cd1 at ata3 bus 0 scbus2 target 0 lun 0
cd1: <TOSHIBA CD-ROM XM-7002Bc 1110> Removable CD-ROM SCSI device
cd1: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes)
cd1: Attempt to query device size failed: NOT READY, Medium not present
da2 at sym0 bus 0 scbus0 target 2 lun 0
da2: <ZULUSCSI HARDDRIVE 2.3B> Fixed Direct Access SCSI-2 device
da2: [_SERIAL_NUMBER_XXXXX]
da2: 20.000MB/s transfers (20.000MHz, offset 15)
da2: 4095MB (8386560 512 byte sectors)
da3 at sym0 bus 0 scbus0 target 3 lun 0
da3: <ZULUSCSI HARDDRIVE 2.3B> Fixed Direct Access SCSI-2 device
da3: [_SERIAL_NUMBER_XXXXX]
da3: 20.000MB/s transfers (20.000MHz, offset 15)
da3: 4095MB (8388607 512 byte sectors)
GEOM: da2: adding VTOC8 information.
mountroot: waiting for device /dev/da3a...
Warning: no time-of-day clock registered, system time will not be set accurately
lo0: link state changed to UP
hme0: link state changed to DOWN
hme0: link state changed to UP
# dd status=progress if=/dev/da0 of=/dev/null bs=1m count=100
96468992 bytes (96 MB, 92 MiB) transferred 6.047s, 16 MB/s
100+0 records in
100+0 records out
104857600 bytes transferred in 6.572954 secs (15952889 bytes/sec)
# dd status=progress if=/dev/da1 of=/dev/null bs=1m count=100
96468992 bytes (96 MB, 92 MiB) transferred 6.027s, 16 MB/s
100+0 records in
100+0 records out
104857600 bytes transferred in 6.551394 secs (16005388 bytes/sec)
# dd status=progress if=/dev/da2 of=/dev/null bs=1m count=100
96468992 bytes (96 MB, 92 MiB) transferred 6.051s, 16 MB/s
100+0 records in
100+0 records out
104857600 bytes transferred in 6.577059 secs (15942932 bytes/sec)
# dd status=progress if=/dev/zero of=/dev/da0 bs=1m count=100
102760448 bytes (103 MB, 98 MiB) transferred 8.034s, 13 MB/s
100+0 records in
100+0 records out
104857600 bytes transferred in 8.222357 secs (12752743 bytes/sec)
# dd status=progress if=/dev/zero of=/dev/da1 bs=1m count=100
102760448 bytes (103 MB, 98 MiB) transferred 8.014s, 13 MB/s
100+0 records in
100+0 records out
104857600 bytes transferred in 8.196122 secs (12793562 bytes/sec)
# dd status=progress if=/dev/zero of=/dev/da2 bs=1m count=100
102760448 bytes (103 MB, 98 MiB) transferred 8.016s, 13 MB/s
100+0 records in
100+0 records out
104857600 bytes transferred in 8.198886 secs (12789250 bytes/sec)
# diskinfo -t da0
da0
512 # sectorsize
268435456 # mediasize in bytes (256M)
524288 # mediasize in sectors
0 # stripesize
0 # stripeoffset
256 # Cylinders according to firmware.
64 # Heads according to firmware.
32 # Sectors according to firmware.
ZULUSCSI HARDDRIVE # Disk descr.
A46D5732 # Disk ident.
No # TRIM/UNMAP support
Unknown # Rotation rate in RPM
Not_Zoned # Zone Mode
Seek times:
Full stroke: 250 iter in 0.161904 sec = 0.648 msec
Half stroke: 250 iter in 0.160917 sec = 0.644 msec
Quarter stroke: 500 iter in 0.319202 sec = 0.638 msec
Short forward: 400 iter in 0.212673 sec = 0.532 msec
Short backward: 400 iter in 0.214931 sec = 0.537 msec
Seq outer: 2048 iter in 0.541207 sec = 0.264 msec
Seq inner: 2048 iter in 0.537669 sec = 0.263 msec
Transfer rates:
outside: 102400 kbytes in 6.610726 sec = 15490 kbytes/sec
middle: 102400 kbytes in 6.602532 sec = 15509 kbytes/sec
inside: 102400 kbytes in 6.603339 sec = 15507 kbytes/sec