Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

Date: 2025-04-15 12:16:47
From: racoon
Description: NetBSD/evbmips 10.1 on EdgeRouter 4
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
    2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
    2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
    2024
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 10.1 (OCTEON) #0: Mon Dec 16 13:08:11 UTC 2024
	[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/evbmips/compile/OCTEON
Cavium Octeon CN7130-1000
total memory = 1024 MB
avail memory = 982 MB
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root)
cpunode0 at mainbus0: 4 cores, crypto+kasumi, 64bit-mul, unaligned-access ok
cpu0 at cpunode0 core 0: 1000.00MHz
cpu0: Cavium CN7130-1000 (0xd9602) Rev. 2 with built-in FPU
cpu0: 256 TLB entries, 512TB (49-bit) VAs, 512TB (49-bit) PAs, 256MB max page size
cpu0: 78KB/128B 39-way set-associative L1 instruction cache
cpu0: 32KB/128B 32-way set-associative write-through coherent L1 data cache
cpu0: 1024KB/128B 8-way set-associative write-back L2 unified cache
cpu1 at cpunode0 core 1: disabled (uniprocessor kernel)
cpu2 at cpunode0 core 2: disabled (uniprocessor kernel)
cpu3 at cpunode0 core 3: disabled (uniprocessor kernel)
wdog0 at cpunode0: default period is 4 seconds
iobus0 at mainbus0
iobus0: initializing POW
iobus0: initializing FPA
octrnm0 at iobus0 address 0x0001180040000000
entropy: ready
simplebus0 at mainbus0: cavium,ubnt_e300
simplebus1 at simplebus0
octintc0 at simplebus1: CIU
octcib0 at simplebus1: CIB
octintc0: autoconfiguration error: CIU irq 144 (2, 16) out of range
octcib0: autoconfiguration error: couldn't establish interrupt on CIU irq 144
octcib1 at simplebus1: CIB
octcib1: interrupting on CIU irq 97
octcib2 at simplebus1: CIB
octcib2: interrupting on CIU irq 81
octcib3 at simplebus1: CIB
octintc0: autoconfiguration error: CIU irq 145 (2, 17) out of range
octcib3: autoconfiguration error: couldn't establish interrupt on CIU irq 145
octcib4 at simplebus1: CIB
octcib4: interrupting on CIU irq 88
octcib5 at simplebus1: CIB
octcib5: interrupting on CIU irq 116
octcib6 at simplebus1: CIB
octcib6: interrupting on CIU irq 127
octsmi0 at simplebus1
octsmi1 at simplebus1
octpip0 at simplebus1
octgmx0 at octpip0
cnmac0 at octgmx0: address=0x1180008000000: SGMII
cnmac0: Ethernet address [_MAC_XXXXXXXXXX]
ukphy0 at cnmac0 phy 4: Vitesse Semiconductor Vitesse VSC8504 quad 10/100/1000TX PHY (OUI 0x008083, model 0x000c), rev. 2
ukphy0: 1000baseT, 1000baseT-FDX, auto
cnmac1 at octgmx0: address=0x1180008000000: SGMII
cnmac1: Ethernet address [_MAC_XXXXXXXXXX]
ukphy1 at cnmac1 phy 5: Vitesse Semiconductor Vitesse VSC8504 quad 10/100/1000TX PHY (OUI 0x008083, model 0x000c), rev. 2
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
cnmac2 at octgmx0: address=0x1180008000000: SGMII
cnmac2: Ethernet address [_MAC_XXXXXXXXXX]
ukphy2 at cnmac2 phy 6: Vitesse Semiconductor Vitesse VSC8504 quad 10/100/1000TX PHY (OUI 0x008083, model 0x000c), rev. 2
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
cnmac3 at octgmx0: address=0x1180008000000: SGMII
cnmac3: Ethernet address [_MAC_XXXXXXXXXX]
ukphy3 at cnmac3 phy 7: Vitesse Semiconductor Vitesse VSC8504 quad 10/100/1000TX PHY (OUI 0x008083, model 0x000c), rev. 2
ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
/soc@0/gpio-controller@1070000000800 at simplebus1 not configured
/gpio-leds at simplebus0 not configured
/soc@0/bootbus@1180000000000 at simplebus1 not configured
/soc@0/uctl@118006c000000 at simplebus1 not configured
xhci0 at simplebus1: DWC3 rev 0x250a
xhci0: interrupting on octcib1 intr 9
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
xhci1 at simplebus1: DWC3 rev 0x250a
xhci1: interrupting on octcib2 intr 9
xhci1: xHCI version 1.0
usb2 at xhci1: USB revision 3.0
usb3 at xhci1: USB revision 2.0
/soc@0/i2c@1180000001000 at simplebus1 not configured
/soc@0/i2c@1180000001200 at simplebus1 not configured
com0 at simplebus1: ns16650, no ERS, 16-byte FIFO
com0: console
com0: interrupting on CIU irq 34
com1 at simplebus1: ns16650, no ERS, 16-byte FIFO
com1: interrupting on CIU irq 35
/soc@0/mmc@1180000002000 at simplebus1 not configured
/soc@0/spi@1070000001000 at simplebus1 not configured
/soc@0/ocla0@11800A8000000 at simplebus1 not configured
/soc@0/dma-engine@1180000000100 at simplebus1 not configured
/soc@0/dma-engine@1180000000108 at simplebus1 not configured
timecounter: Timecounter "mips3_cp0_counter" frequency 1000000000 Hz quality 100
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 1 port with 1 removable, self powered
uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 1 port with 1 removable, self powered
uhub2 at usb2: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
uhub2: 1 port with 1 removable, self powered
uhub3 at usb3: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
uhub3: 1 port with 1 removable, self powered
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: USB (0x0781) SanDisk 3.2Gen1 (0x55a9), rev 3.20/1.00, addr 1
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <USB, SanDisk 3.2Gen1, 1.00> disk removable
sd0: 114 GB, 65535 cyl, 16 head, 63 sec, 512 bytes/sect x 240328704 sectors
sd0: GPT GUID: 9831162b-f60f-4eee-95e0-1eb7ce2893fa
dk0 at sd0: "octeon-boot", 163840 blocks at 32768, type: ntfs
dk1 at sd0: "octeon-root", 240123904 blocks at 196608, type: ffs
swwdog0: software watchdog initialized
WARNING: 4 errors while detecting hardware; check system log.
boot device: sd0
root on dk1
root file system type: ffs
kern.module.path=/stand/evbmips/10.1/modules
WARNING: no TOD clock present
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!