Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-04-15 23:14:19
From: fchutch
Description: Thinkpad T40
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.000000] 2024 [ 1.000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 10.1 (GENERIC) #0: Mon Dec 16 13:08:11 UTC 2024 [ 1.000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC [ 1.000000] total memory = 1278 MB [ 1.000000] avail memory = 1232 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] Kernelized RAIDframe activated [ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 [ 1.000004] mainbus0 (root) [ 1.000004] ACPI: RSDP 0x00000000000F6D70 000024 (v02 IBM ) [ 1.000004] ACPI: XSDT 0x000000004FF6A672 00004C (v01 IBM TP-1R 00003230 LTP 00000000) [ 1.000004] ACPI: FACP 0x000000004FF6A700 0000F4 (v03 IBM TP-1R 00003230 IBM 00000001) [ 1.000004] Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20221020/tbfadt-640) [ 1.000004] Firmware Warning (ACPI): Optional FADT field Gpe1Block has valid Address but zero Length: 0x000000000000102C/0x0 (20221020/tbfadt-688) [ 1.000004] ACPI: DSDT 0x000000004FF6A8E7 00C530 (v01 IBM TP-1R 00003230 MSFT 0100000E) [ 1.000004] ACPI: FACS 0x000000004FF78000 000040 [ 1.000004] ACPI: SSDT 0x000000004FF6A8B4 000033 (v01 IBM TP-1R 00003230 MSFT 0100000E) [ 1.000004] ACPI: ECDT 0x000000004FF76E17 000052 (v01 IBM TP-1R 00003230 IBM 00000001) [ 1.000004] ACPI: TCPA 0x000000004FF76E69 000032 (v01 IBM TP-1R 00003230 PTL 00000001) [ 1.000004] ACPI: BOOT 0x000000004FF76FD8 000028 (v01 IBM TP-1R 00003230 LTP 00000001) [ 1.000004] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.000004] cpu0 at mainbus0 [ 1.000004] cpu0: Use lfence to serialize rdtsc [ 1.000004] cpu0: Intel(R) Pentium(R) M processor 1500MHz, id 0x695 [ 1.000004] cpu0: node 0, package 0, core 0, smt 0 [ 1.000004] acpi0 at mainbus0: Intel ACPICA 20221020 [ 1.000004] acpi0: X/RSDT: OemId <IBM ,TP-1R ,00003230>, AslId < LTP,00000000> [ 1.000004] acpiecdt0 at acpi0: ACPI Embedded Controller via ECDT [ 1.000004] LNKA: ACPI: Found matching pin for 0.29.INTA at func 0: 11 [ 1.000004] LNKD: ACPI: Found matching pin for 0.29.INTB at func 1: 11 [ 1.000004] LNKC: ACPI: Found matching pin for 0.29.INTC at func 2: 11 [ 1.000004] LNKH: ACPI: Found matching pin for 0.29.INTD at func 7: 11 [ 1.000004] LNKC: ACPI: Found matching pin for 0.31.INTA at func 1: 255 [ 1.000004] LNKB: ACPI: Found matching pin for 0.31.INTB at func 3: 11 [ 1.000004] LNKA: ACPI: Found matching pin for 1.0.INTA at func 0: 11 [ 1.000004] LNKA: ACPI: Found matching pin for 2.0.INTA at func 0: 11 [ 1.000004] LNKB: ACPI: Found matching pin for 2.0.INTB at func 1: 11 [ 1.000004] LNKE: ACPI: Found matching pin for 2.8.INTA at func 0: 11 [ 1.000004] acpi0: SCI interrupting at int 9 [ 1.000004] acpi0: fixed power button present [ 1.000004] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 [ 1.004603] acpiec0 at acpi0 (EC, PNP0C09-0): using acpiecdt0 [ 1.004603] MEM (PNP0C01) at acpi0 not configured [ 1.004603] acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch [ 1.004603] acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button [ 1.004603] attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43 irq 0 [ 1.004603] pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 [ 1.004603] midi0 at pcppi1: PC speaker [ 1.004603] sysbeep0 at pcppi1 [ 1.004603] FPU (PNP0C04) at acpi0 not configured [ 1.004603] pckbc1 at acpi0 (KBD, PNP0303) (kbd port): io 0x60,0x64 irq 1 [ 1.004603] pckbc2 at acpi0 (MOU, IBM0057) (aux port): irq 12 [ 1.004603] UART (PNP0501) at acpi0 not configured [ 1.004603] LPT (PNP0400) at acpi0 not configured [ 1.004603] FIR (IBM0071) at acpi0 not configured [ 1.004603] acpibat0 at acpi0 (BAT0, PNP0C0A-0): ACPI Battery [ 1.004603] acpiacad0 at acpi0 (AC, ACPI0003-0): ACPI AC Adapter [ 1.004603] thinkpad0 at acpi0 (HKEY, IBM0068) [ 1.004603] thinkpad0: version 0100 [ 1.004603] acpivga0 at acpi0 (VID): ACPI Display Adapter [ 1.004603] acpiout0 at acpivga0 (LCD0, 0x0110): ACPI Display Output Device [ 1.004603] acpiout1 at acpivga0 (CRT0, 0x0100): ACPI Display Output Device [ 1.004603] acpiout2 at acpivga0 (TV0, 0x0200): ACPI Display Output Device [ 1.004603] acpiout3 at acpivga0 (DVI0, 0x0210): ACPI Display Output Device [ 1.004603] acpivga0: connected output devices: [ 1.004603] acpivga0: 0x0110 (acpiout0): LCD Panel, head 0 [ 1.004603] acpivga0: 0x0100 (acpiout1): Ext. Monitor, head 0 [ 1.004603] acpivga0: 0x0200 (acpiout2): TV, head 0 [ 1.004603] acpivga0: 0x0210 (acpiout3): Unknown Output Device, head 0 [ 1.004603] acpitz0 at acpi0 (THM0) [ 1.004603] acpitz0: levels: critical 93.0 C, passive 89.5 C, passive cooling [ 1.004603] apm0 at acpi0: Power Management spec V1.2 [ 1.004603] attimer1: attached to pcppi1 [ 1.004603] pckbd0 at pckbc1 (kbd slot) [ 1.004603] pckbc1: using irq 1 for kbd slot [ 1.004603] wskbd0 at pckbd0: console keyboard [ 1.004603] pms0 at pckbc1 (aux slot) [ 1.004603] pckbc1: using irq 12 for aux slot [ 1.004603] wsmouse0 at pms0 mux 0 [ 1.004603] pci0 at mainbus0 bus 0: configuration mode 1 [ 1.004603] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.004603] pchb0 at pci0 dev 0 function 0: Intel 82855PM MCH Host Controller (rev. 0x03) [ 1.004603] agp0 at pchb0: aperture at 0xd0000000, size 0x10000000 [ 1.004603] ppb0 at pci0 dev 1 function 0: Intel 82855PM Host-AGP Bridge (rev. 0x03) [ 1.004603] pci1 at ppb0 bus 1 [ 1.004603] pci1: i/o space, memory space enabled [ 1.004603] vga0 at pci1 dev 0 function 0: ATI Technologies Radeon Mobility M7 LW (rev. 0x00) [ 1.004603] wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0 [ 1.004603] wsmux1: connecting to wsdisplay0 [ 1.004603] drm at vga0 not configured [ 1.004603] uhci0 at pci0 dev 29 function 0: Intel 82801DB USB UHCI Controller (rev. 0x01) [ 1.004603] uhci0: interrupting at irq 11 [ 1.004603] usb0 at uhci0: USB revision 1.0 [ 1.004603] uhci1 at pci0 dev 29 function 1: Intel 82801DB USB UHCI Controller (rev. 0x01) [ 1.004603] uhci1: interrupting at irq 11 [ 1.004603] usb1 at uhci1: USB revision 1.0 [ 1.004603] uhci2 at pci0 dev 29 function 2: Intel 82801DB USB UHCI Controller (rev. 0x01) [ 1.004603] uhci2: interrupting at irq 11 [ 1.004603] usb2 at uhci2: USB revision 1.0 [ 1.004603] ehci0 at pci0 dev 29 function 7: Intel 82801DB USB EHCI Controller (rev. 0x01) [ 1.004603] ehci0: 64-bit DMA - limited [ 1.004603] ehci0: interrupting at irq 11 [ 1.004603] ehci0: EHCI version 1.0 [ 1.004603] ehci0: 3 companion controllers, 2 ports each: uhci0 uhci1 uhci2 [ 1.004603] ehci0: Using DMA subregion for control data structures [ 1.004603] usb3 at ehci0: USB revision 2.0 [ 1.004603] ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0x81) [ 1.004603] pci2 at ppb1 bus 2 [ 1.004603] pci2: i/o space, memory space enabled [ 1.004603] cbb0 at pci2 dev 0 function 0: Texas Instruments PCI1520 PCI-CardBus Bridge (rev. 0x01) [ 1.004603] cbb1 at pci2 dev 0 function 1: Texas Instruments PCI1520 PCI-CardBus Bridge (rev. 0x01) [ 1.004603] fxp0 at pci2 dev 8 function 0: Intel PRO/100 VE (MOB) Network Controller (rev. 0x81) [ 1.004603] fxp0: interrupting at irq 11 [ 1.004603] fxp0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.004603] inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0 [ 1.004603] inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.004603] cbb0: cacheline 0x8 lattimer 0x40 [ 1.004603] cbb0: bhlc 0x824008 [ 1.004603] cbb0: interrupting at irq 11 [ 1.004603] cardslot0 at cbb0 [ 1.004603] cardbus0 at cardslot0: bus 3 [ 1.004603] pcmcia0 at cardslot0 [ 1.004603] cbb1: cacheline 0x8 lattimer 0x40 [ 1.004603] cbb1: bhlc 0x824008 [ 1.004603] cbb1: interrupting at irq 11 [ 1.004603] cardslot1 at cbb1 [ 1.004603] cardbus1 at cardslot1: bus 6 [ 1.004603] pcmcia1 at cardslot1 [ 1.004603] ichlpcib0 at pci0 dev 31 function 0: Intel 82801DB LPC Interface Bridge (rev. 0x01) [ 1.004603] timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 [ 1.004603] ichlpcib0: 24-bit timer [ 1.004603] tco0 at ichlpcib0: TCO (watchdog) timer configured. [ 1.004603] tco0: Min/Max interval 2/37 seconds [ 1.004603] ichlpcib0: SpeedStep enabled [ 1.004603] piixide0 at pci0 dev 31 function 1: Intel 82801DBM IDE Controller (ICH4-M) (rev. 0x01) [ 1.004603] piixide0: bus-master DMA support present [ 1.004603] piixide0: primary channel configured to compatibility mode [ 1.004603] piixide0: primary channel interrupting at irq 14 [ 1.004603] atabus0 at piixide0 channel 0 [ 1.004603] piixide0: secondary channel configured to compatibility mode [ 1.004603] piixide0: secondary channel interrupting at irq 15 [ 1.004603] atabus1 at piixide0 channel 1 [ 1.004603] ichsmb0 at pci0 dev 31 function 3: Intel 82801DB SMBus Controller (rev. 0x01) [ 1.004603] ichsmb0: interrupting at irq 11 [ 1.004603] iic0 at ichsmb0: I2C bus [ 1.004603] auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio [ 1.004603] auich0: interrupting at irq 11 [ 1.004603] auich0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D stereo [ 1.004603] auich0: ac97: ext id 0x601<AC97_22,AMAP,VRA> [ 1.004603] Intel 82801DB AC97 Modem Controller (modem communications, revision 0x01) at pci0 dev 31 function 6 not configured [ 1.004603] isa0 at ichlpcib0 [ 1.004603] lpt2 at isa0 port 0x3bc-0x3bf irq : polled [ 1.004603] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16-byte FIFO [ 1.004603] com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 16-byte FIFO [ 1.004603] est0 at cpu0: Enhanced SpeedStep [ 1.678753] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 2.018871] auich0: measured ac97 link rate at 48001 Hz, will use 48000 Hz [ 2.018871] audio0 at auich0: playback, capture, full duplex, independent [ 2.018871] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback [ 2.018871] audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording [ 2.018871] acpiacad0: AC adapter online. [ 2.018871] uhub0 at usb0: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 2.018871] uhub0: 2 ports with 2 removable, self powered [ 2.018871] uhub1 at usb1: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 2.018871] uhub1: 2 ports with 2 removable, self powered [ 2.018871] uhub2 at usb2: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 2.018871] uhub2: 2 ports with 2 removable, self powered [ 2.018871] uhub3 at usb3: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 2.018871] uhub3: 6 ports with 6 removable, self powered [ 2.018871] IPsec: Initialized Security Association Processing. [ 2.028876] acpibat0: SANYO LION rechargeable battery [ 2.028876] acpibat0: granularity: low->warn 0.001 Wh, warn->full 0.001 Wh [ 3.088888] urtwn0 at uhub3 port 4 [ 3.088888] urtwn0: Realtek (0x0bda) 802.11n NIC (0x8179), rev 2.00/0.00, addr 2 [ 3.198890] urtwn0: MAC/BB RTL8188EU, RF 6052 1T1R, address [_MAC_XXXXXXXXXX] [ 3.198890] urtwn0: 1 rx pipe, 2 tx pipes [ 5.028921] wd0 at atabus0 drive 0 [ 5.028921] wd0: <WDC WD800BEVE-00UYT0> [ 5.028921] wd0: drive supports 16-sector PIO transfers, LBA48 addressing [ 5.028921] wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors [ 5.118920] wd0: 32-bit data port [ 5.118920] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) [ 5.118920] wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) [ 5.118920] atapibus0 at atabus1: 2 targets [ 5.128921] cd0 at atapibus0 drive 0: <TOSHIBA DVD-ROM SD-R9012, 14GJ400865, 1121> cdrom removable [ 5.148920] cd0: 32-bit data port [ 5.148920] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) [ 5.148920] cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) [ 5.148920] swwdog0: software watchdog initialized [ 5.208921] boot device: wd0 [ 5.208921] root on wd0a dumps on wd0b [ 5.248921] root file system type: ffs [ 5.248921] kern.module.path=/stand/i386/10.1/modules [ 32.019332] acpibat0: normal capacity on 'charge state' [ 34.699375] wsdisplay0: screen 1 added (80x25, vt100 emulation) [ 34.709378] wsdisplay0: screen 2 added (80x25, vt100 emulation) [ 34.709378] wsdisplay0: screen 3 added (80x25, vt100 emulation) [ 34.709378] wsdisplay0: screen 4 added (80x25, vt100 emulation)