Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-04-29 12:44:32
From: Git
Description: FreeBSD/amd64 on LENOVO QITIANM
re0: link state changed to DOWN re0: link state changed to UP Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 0 done All buffers synced. ---<<BOOT>>--- Copyright (c) 1992-2021 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 13.4-RELEASE releng/13.4-n258257-58066db597be GENERIC amd64 FreeBSD clang version 18.1.6 (https://github.com/llvm/llvm-project.git llvmorg-18.1.6-0-g1118c2e05e67) VT(vga): resolution 640x480 CPU: Intel(R) Core(TM) i3-3240 CPU @ 3.40GHz (3392.48-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x3d9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX,F16C> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 12884901888 (12288 MB) avail memory = 12409135104 (11834 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <LENOVO TC-F9 > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 Launching APs: 1 2 3 random: entropy device external interface kbd1 at kbdmux0 vtvga0: <VT VGA driver> smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de smbios0: Version: 2.7, BCD Revision: 2.7 aesni0: No AES or SHA support. acpi0: <LENOVO TC-F9> acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xe0000000-0xefffffff,0xf7e20000-0xf7e3ffff irq 16 at device 0.0 on pci1 vgapci0: Boot video device hdac0: <ATI RV910 HDA Controller> mem 0xf7e40000-0xf7e43fff irq 17 at device 0.1 on pci1 pci0: <simple comms> at device 22.0 (no driver attached) ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xf7f08000-0xf7f083ff irq 16 at device 26.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 usbus0: 480Mbps High Speed USB v2.0 hdac1: <Intel Cougar Point HDA Controller> mem 0xf7f00000-0xf7f03fff irq 22 at device 27.0 on pci0 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pci5: <ACPI PCI bus> on pcib5 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf7d04000-0xf7d04fff,0xf7d00000-0xf7d03fff irq 16 at device 0.0 on pci5 re0: Using 1 MSI-X message re0: Chip rev. 0x48000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xf7f07000-0xf7f073ff irq 16 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci1 usbus1: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf7f06000-0xf7f067ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 4 3Gbps ports, Port Multiplier not supported ahcich1: <AHCI channel> at channel 1 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff pnpid ORM0000 on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 Timecounter "TSC-low" frequency 1696147027 Hz quality 1000 Timecounters tick every 1.000 msec hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 hdacc1: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc1 pcm1: <Realtek ALC662 rev3 (Analog 2.0+HP/2.0)> at nid 20,27 and 24,26 on hdaa1 pcm2: <Realtek ALC662 rev3 (Analog)> at nid 21 and 25 on hdaa1 ugen1.1: <Intel EHCI root HUB> at usbus1 Trying to mount root from ufs:/dev/ada0s1a [rw]... ugen0.1: <Intel EHCI root HUB> at usbus0 uhub0 on usbus1 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub1 on usbus0 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 ada0: <WDC WD5000AAKX-08U6AA0 19.01H19> ATA8-ACS SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes) ada0: Command Queueing enabled ada0: 476940MB (976773168 512 byte sectors) ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ses0: ada0,pass0 in 'Slot 01', SATA Slot: scbus0 target 0 uhub1: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered Root mount waiting for: usbus0 usbus1 ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 uhub2 on uhub1 uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 uhub3 on uhub0 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 Root mount waiting for: usbus0 usbus1 uhub2: 4 ports with 4 removable, self powered uhub3: 6 ports with 6 removable, self powered ugen1.3: <vendor 0x1ea7 2.4G Mouse> at usbus1 Root mount waiting for: usbus1 ugen1.4: <USB Flash Disk> at usbus1 umass0 on uhub3 umass0: <USB Flash Disk, class 0/0, rev 2.00/11.00, addr 4> on usbus1 umass0: SCSI over Bulk-Only; quirks = 0x4000 umass0:2:0: Attached to scbus2 da0 at umass-sim0 bus 0 scbus2 target 0 lun 0 da0: <USB Flash Disk 1100> Removable Direct Access SPC-2 SCSI device da0: [_SERIAL_NUMBER_XXXXXXXXXXXXX] da0: 40.000MB/s transfers da0: 7800MB (15974400 512 byte sectors) da0: quirks=0x2<NO_6_BYTE> ichsmb0: <Intel Cougar Point SMBus controller> port 0xf000-0xf01f mem 0xf7f05000-0xf7f050ff irq 18 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: cannot find EC device acpi_wmi0: Embedded MOF found ACPI: \134WMI1.WQCA: 1 arguments were passed to a non-method ACPI object (Buffer) (20201113/nsarguments-361) lo0: link state changed to UP re0: link state changed to UP ums0 on uhub3 ums0: <vendor 0x1ea7 2.4G Mouse, class 0/0, rev 1.10/2.00, addr 3> on usbus1 ums0: 8 buttons and [XYZT] coordinates ID=2