Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-05-01 12:24:31
From: jj
Description: OpenBSD 7.7 on VisionFive2 risc-v board.
>> OpenBSD/riscv64 BOOTRISCV64 1.7
boot>
booting sd0a:/bsd: 5590532+1790016+214640+718080 [392461+122+536928+386940]=0xa255a0
clk u5_dw_i2c_clk_core already disabled
clk u5_dw_i2c_clk_apb already disabled
bootargs:
type 0x2 pa 0x40000000 va 0x40000000 pages 0x4000 attr 0x8
type 0x7 pa 0x44000000 va 0x44000000 pages 0x3f00 attr 0x8
type 0x9 pa 0x47f00000 va 0x47f00000 pages 0xa attr 0x8
type 0x7 pa 0x47f0a000 va 0x47f0a000 pages 0xb66e1 attr 0x8
type 0x2 pa 0xfe5eb000 va 0xfe5eb000 pages 0x8 attr 0x8
type 0x4 pa 0xfe5f3000 va 0xfe5f3000 pages 0x1 attr 0x8
type 0x7 pa 0xfe5f4000 va 0xfe5f4000 pages 0x1 attr 0x8
type 0x2 pa 0xfe5f5000 va 0xfe5f5000 pages 0x100 attr 0x8
type 0x1 pa 0xfe6f5000 va 0xfe6f5000 pages 0x25 attr 0x8
type 0x4 pa 0xfe71a000 va 0xfe71a000 pages 0x5 attr 0x8
type 0x6 pa 0xfe71f000 va 0xfe71f000 pages 0x1 attr 0x8000000000000008
type 0x4 pa 0xfe720000 va 0xfe720000 pages 0x3 attr 0x8
type 0x6 pa 0xfe723000 va 0xfe723000 pages 0x3 attr 0x8000000000000008
type 0x4 pa 0xfe726000 va 0xfe726000 pages 0x1 attr 0x8
type 0x6 pa 0xfe727000 va 0xfe727000 pages 0x4 attr 0x8000000000000008
type 0x4 pa 0xfe72b000 va 0xfe72b000 pages 0xb attr 0x8
type 0x2 pa 0xfe736000 va 0xfe736000 pages 0x1811 attr 0x8
type 0x5 pa 0xfff47000 va 0xfff47000 pages 0x1 attr 0x8000000000000008
type 0x2 pa 0xfff48000 va 0xfff48000 pages 0xb8 attr 0x8
type 0x4 pa 0x100000000 va 0x100000000 pages 0x140000 attr 0x8
[ using 1317424 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2025 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.7-current (GENERIC.MP) #22: Wed Apr 30 04:38:52 MDT 2025
[_EMAIL_XXXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/riscv64/compile/GENERIC.MP
real mem = 4294967296 (4096MB)
avail mem = 8235212800 (7853MB)
SBI: OpenSBI v1.0, SBI Specification Version 0.3
random: good seed from bootblocks
mainbus0 at root: StarFive VisionFive 2 v1.2A
cpu0 at mainbus0: SiFive U7 imp 4210427 rv64imafdc_zba_zbb
intc0 at cpu0
cpu0: 32KB 64b/line 64-way L1 I-cache, 32KB 64b/line 64-way L1 D-cache
cpu0: 2048KB 64b/line 2048-way L2 cache
cpu1 at mainbus0: SiFive U7 imp 4210427 rv64imafdc_zba_zbb
cpu1: 32KB 64b/line 64-way L1 I-cache, 32KB 64b/line 64-way L1 D-cache
cpu1: 2048KB 64b/line 2048-way L2 cache
cpu2 at mainbus0: SiFive U7 imp 4210427 rv64imafdc_zba_zbb
cpu2: 32KB 64b/line 64-way L1 I-cache, 32KB 64b/line 64-way L1 D-cache
cpu2: 2048KB 64b/line 2048-way L2 cache
cpu3 at mainbus0: SiFive U7 imp 4210427 rv64imafdc_zba_zbb
cpu3: 32KB 64b/line 64-way L1 I-cache, 32KB 64b/line 64-way L1 D-cache
cpu3: 2048KB 64b/line 2048-way L2 cache
"opp-table-0" at mainbus0 not configured
"dvp-clock" at mainbus0 not configured
"gmac0-rgmii-rxin-clock" at mainbus0 not configured
"gmac0-rmii-refin-clock" at mainbus0 not configured
"gmac1-rgmii-rxin-clock" at mainbus0 not configured
"gmac1-rmii-refin-clock" at mainbus0 not configured
"hdmitx0-pixel-clock" at mainbus0 not configured
"i2srx-bclk-ext-clock" at mainbus0 not configured
"i2srx-lrck-ext-clock" at mainbus0 not configured
"i2stx-bclk-ext-clock" at mainbus0 not configured
"i2stx-lrck-ext-clock" at mainbus0 not configured
"mclk-ext-clock" at mainbus0 not configured
"oscillator" at mainbus0 not configured
"rtc-oscillator" at mainbus0 not configured
"stmmac-axi-config" at mainbus0 not configured
"tdm-ext-clock" at mainbus0 not configured
simplebus0 at mainbus0: "soc"
plic0 at simplebus0
stfpciephy0 at simplebus0
stfpciephy1 at simplebus0
stfclock0 at simplebus0: stgcrg
syscon0 at simplebus0: "syscon"
stfclock1 at simplebus0: syscrg
syscon1 at simplebus0: "syscon"
stfclock2 at syscon1: pll
stfpinctrl0 at simplebus0
stfclock3 at simplebus0: aoncrg
syscon2 at simplebus0: "syscon"
"timer" at simplebus0 not configured
"cache-controller" at simplebus0 not configured
com0 at simplebus0: dw16550
com0: console
dwiic0 at simplebus0
iic0 at dwiic0
dwiic1 at simplebus0
iic1 at dwiic1
"tdm" at simplebus0 not configured
"usb" at simplebus0 not configured
"phy" at simplebus0 not configured
dwiic2 at simplebus0
iic2 at dwiic2
axppmic0 at iic2 addr 0x36: AXP15060
dwiic3 at simplebus0
iic3 at dwiic3
"sony,imx219" at iic3 addr 0x10 not configured
"pwm" at simplebus0 not configured
stftemp0 at simplebus0
"spi" at simplebus0 not configured
"timer" at simplebus0 not configured
"watchdog" at simplebus0 not configured
"dma" at simplebus0 not configured
stfrng0 at simplebus0
dwmmc0 at simplebus0: 198 MHz base clock
sdmmc0 at dwmmc0: 8-bit, mmc high-speed, dma
dwmmc1 at simplebus0: 198 MHz base clock
sdmmc1 at dwmmc1: 4-bit, sd high-speed, dma
dwqe0 at simplebus0 gmac 0: rev 0x52, address [_MAC_XXXXXXXXXX]
ytphy0 at dwqe0 phy 0: YT8531, rev. 11
dwqe1 at simplebus0 gmac 1dwqe1: reset timeout
: rev 0x52, address [_MAC_XXXXXXXXXX]
dwqe1: reset timeout
ytphy1 at dwqe1 phy 0: YT8531, rev. 11
"dma-controller" at simplebus0 not configured
"pinctrl" at simplebus0 not configured
"power-controller" at simplebus0 not configured
"csi-bridge" at simplebus0 not configured
"clock-controller" at simplebus0 not configured
"phy" at simplebus0 not configured
"camss" at simplebus0 not configured
"clock-controller" at simplebus0 not configured
stfpcie0 at simplebus0
pci0 at stfpcie0
ppb0 at pci0 dev 0 function 0 "PLDA XpressRICH-AXI" rev 0x00
pci1 at ppb0 bus 1
xhci0 at pci1 dev 0 function 0 "VIA VL805 xHCI" rev 0x01: intx, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "VIA xHCI root hub" rev 3.00/1.00 addr 1
stfpcie1 at simplebus0
pci2 at stfpcie1
ppb1 at pci2 dev 0 function 0 "PLDA XpressRICH-AXI" rev 0x00
pci3 at ppb1 bus 1
gpiorestart0 at mainbus0
"clk_ext_camera" at mainbus0 not configured
scsibus0 at sdmmc1: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <Sandisk, SD32G, 0085> removable
sd0: 30448MB, 512 bytes/sector, 62357504 sectors
sdmmc0: can't enable card
uhub1 at uhub0 port 1 configuration 1 interface 0 "vendor 0x2109 USB2.0 Hub" rev 2.10/4.20 addr 2
umodem0 at uhub1 port 3 configuration 1 interface 1 "SAMSUNG SAMSUNG_Android" rev 2.10/c.00 addr 3
umodem0: data interface 2, has no CM over data, has no break
umodem0: status change notification available
ucom0 at umodem0: usb0.1.00003.2
ugen0 at uhub1 port 3 configuration 1 "SAMSUNG SAMSUNG_Android" rev 2.10/c.00 addr 3
umass0 at uhub1 port 4 configuration 1 interface 0 "Kingston DataTraveler G3" rev 2.00/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Kingston, DataTraveler G3, PMAP> removable serial.09511643BCB0291F0079
sd1: 7548MB, 512 bytes/sector, 15458304 sectors
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (3036244d5a93e2af.a) swap on sd0b dump on sd0b
WARNING: CHECK AND RESET THE DATE!
Automatic boot in progress: starting file system checks.
/dev/sd0a (3036244d5a93e2af.a): file system is clean; not checking
/dev/sd0l (3036244d5a93e2af.l): file system is clean; not checking
/dev/sd0d (3036244d5a93e2af.d): file system is clean; not checking
/dev/sd0f (3036244d5a93e2af.f): file system is clean; not checking
/dev/sd0g (3036244d5a93e2af.g): file system is clean; not checking
/dev/sd0h (3036244d5a93e2af.h): file system is clean; not checking
/dev/sd0k (3036244d5a93e2af.k): file system is clean; not checking
/dev/sd0j (3036244d5a93e2af.j): file system is clean; not checking
/dev/sd0e (3036244d5a93e2af.e): file system is clean; not checking
pf enabled
starting network
stfclock_get_frequency_jh7110_sys: unknown clock 0x0000000f
reordering: ld.so libc libcrypto sshd sshd-session sshd-auth ssh-agent.
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd sndiod.
starting local daemons: cron.
Wed Apr 30 14:33:05 CEST 2025
OpenBSD/riscv64 (riscv.my.domain) (console)
login: