Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-05-02 12:43:23
From: superbofh
Description: DragonFlyBSD 6.4.1
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly v6.4.1-RELEASE #9: Tue Apr 29 16:25:51 EDT 2025
[_EMAIL_XXXXXXXXXXXXXXXXXX]:/usr/obj/home/justin/release/6_4/sys/X86_64_GENERIC
acpi_hpet: frequency 14318180
Using cputimer HPET for TSC calibration
Timer latency (in TSC ticks): 2057 min=1358 max=2310
TSC clock: 1861999821 Hz
CPU: Intel(R) Celeron(R) CPU 540 @ 1.86GHz (1862.00-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x10661 Stepping = 1
Features=0xafebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Features2=0xe31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20000800<SYSCALL,LM>
AMD Features2=0x1<LAHF>
Thermal and PM Features=0x1<SENSOR>
MONITOR/MWAIT Features=0x3<CST,INTBRK>
real memory = 1062231040 (1013 MB)
avail memory = 992321536 (946 MB)
madt_lapic_probe: lapic_count=1 x2apic_count=0
ACPI CPUS = 1
lapic: divisor index 0, frequency 66500026 Hz
CPU Topology: cores_per_chip: 1; threads_per_core: 1; chips_per_package: 1;
srat_probe: can't locate SRAT
Initialize MI interrupts for 1 cpus
TSC is not invariant, no further tests will be performed
Spectre: support=( none ) req=ffff operating=( none )
MDS: support=( none ) req=ffff operating=( none )
machdep.meltdown_mitigation enabled to protect against (mostly Intel) meltdown bug
system call performance will be impacted
interrupt uses mplock: swi_taskq
wdog: In-kernel automatic watchdog reset enabled
md0: Malloc disk
evdev device loaded.
kbd1 at kbdmux0
ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
ACPI: XSDT 0x000000003F6FE120 000064 (v01 ACRSYS ACRPRDCT 00000001 01000013)
ACPI: FACP 0x000000003F6FD000 0000F4 (v04 ACRSYS ACRPRDCT 00000001 MSFT 01000013)
ACPI: DSDT 0x000000003F6F4000 0084EA (v01 ACRSYS ACRPRDCT 00000001 MSFT 01000013)
ACPI: FACS 0x000000003F67B000 000040
ACPI: APIC 0x000000003F6F3000 000068 (v02 ACRSYS ACRPRDCT 00000001 MSFT 01000013)
ACPI: MCFG 0x000000003F6F2000 00003C (v01 ACRSYS ACRPRDCT 00000001 MSFT 01000013)
ACPI: SLIC 0x000000003F6F1000 000176 (v01 ACRSYS ACRPRDCT 00000001 MSFT 01000013)
ACPI: HPET 0x000000003F6F0000 000038 (v01 ACRSYS ACRPRDCT 00000001 MSFT 01000013)
ACPI: SSDT 0x000000003F6EF000 0005D7 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 0x000000003F6EE000 0004C4 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: SSDT 0x000000003F6ED000 000232 (v01 PmRef Cpu0Tst 00003000 INTL 20051117)
sc0: <System console> on motherboard
sc0: VGA <16 virtual consoles, flags=0x300>
cryptosoft0: <software crypto> on motherboard
acpi0: <ACRSYS ACRPRDCT> on motherboard
ACPI: 4 ACPI AML tables successfully acquired and loaded
ACPI FADT: SCI testing interrupt mode ...
ACPI FADT: SCI select level/high
acpi0: Power Button (fixed)
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_timer0 on acpi0
cpu0: <ACPI CPU> on acpi0
cpu_cst0: <ACPI CPU C-State> on cpu0
clockmod0: <CPU clock modulation> on cpu0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp0: Tj(target) value 0 does not seem right.
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x66,0x62 on acpi0
acpi_tz0: <Thermal Zone> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x5110-0x5117 mem 0x40000000-0x4fffffff,0x54000000-0x540fffff irq 16 at device 2.0 on pci0
agp0: <Intel GM965 SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 7676k stolen memory
vgapci0: Boot video device
vgapci1: <VGA-compatible display> at device 2.1 on pci0
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x50c0-0x50df irq 16 at device 26.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x50a0-0x50bf irq 21 at device 26.1 on pci0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0x58304c00-0x58304fff irq 18 at device 26.7 on pci0
usbus2: EHCI version 1.0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
usbus2 on ehci0
usbus2: 480Mbps High Speed USB v2.0
pci0: <multimedia, HDA> (vendor 0x8086, dev 0x284b) at device 27.0 irq 22
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib1: Disable PCI Express hot-plug interrupts(0x0009)
pci2: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci5: <ACPI PCI bus> on pcib3
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
bge0: <Broadcom BCM5906M Fast Ethernet> mem 0x55200000-0x5520ffff irq 18 at device 0.0 on pci5
bge0: CHIP ID 0x0000c002; ASIC REV 0x0c; CHIP REV 0xc0; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5906 10/100baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bge0: MAC address: [_MAC_XXXXXXXXXX]
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci6: <ACPI PCI bus> on pcib4
ath0: <Atheros 5424/2424> mem 0x54100000-0x5410ffff irq 19 at device 0.0 on pci6
ath0: AR2425 mac 14.2 RF5424 phy 7.0
ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00a2
uhub0: 2 ports with 2 removable, self powered
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x5080-0x509f irq 23 at device 29.0 on pci0
uhub1: 2 ports with 2 removable, self powered
usbus3 on uhci2
usbus3: 12Mbps Full Speed USB v1.0
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x5060-0x507f irq 19 at device 29.1 on pci0
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x5040-0x505f irq 18 at device 29.2 on pci0
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
usbus5 on uhci4
usbus5: 12Mbps Full Speed USB v1.0
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0x58304800-0x58304bff irq 23 at device 29.7 on pci0
usbus6: EHCI version 1.0
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
usbus6 on ehci1
usbus6: 480Mbps High Speed USB v2.0
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib5
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH8M UDMA100 controller> port 0x50e0-0x50ef,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 18 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
interrupt uses mplock: ata0
ugen6.1: <Intel> at usbus6
uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
uhub3: 2 ports with 2 removable, self powered
acd0: DVDR <MATSHITADVD-RAM UJ870QJ/1.00> at ata0-master UDMA33
ahci0: <AHCI-PCI-SATA> port 0x5020-0x503f,0x5118-0x511b,0x50f0-0x50f7,0x511c-0x511f,0x50f8-0x50ff mem 0x58304000-0x583047ff irq 19 at device 31.2 on pci0
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub2: 4 ports with 4 removable, self powered
ahci0: Intel hocus pocus
ahci0: AHCI 1.1 cap 0xe720ffc2<S64A,NCQ,SSNTF,SALP,SAL,SCLO,PMD,SSC,PSC,CCCS,EMS>, 3 ports, 32 tags/port, gen 2 (3Gbps)
uhub6: 6 ports with 6 removable, self powered
ugen6.2: <SuYin> at usbus6
ahci0.0: Found DISK "Hitachi HTS542512K9SA00 BB2OC31P" serial="071117BB0200WBH5JSKC"
ahci0.0: tags=32/32 satacap=1702 satacap2=0000 satafea=005e NCQ=YES capacity=114473.46MB
ahci0.0: f85=7469 f86=bc49 f87=6163 WC=enabled RA=enabled SEC=frozen
ugen4.2: <vendor 0x413c> at usbus4
ukbd0: <vendor 0x413c Dell KB216 Wired Keyboard, class 0/0, rev 2.00/33.08, addr 2> on usbus4
kbd2 at ukbd0
uhid0: <vendor 0x413c Dell KB216 Wired Keyboard, class 0/0, rev 2.00/33.08, addr 2> on usbus4
ahci0.1: No device detected
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x283e) at device 31.3 irq 19
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
interrupt uses mplock: psm0
psm0: model IntelliMouse, device ID 3
ACPI: Enabled 6 GPEs in block 00 to 1F
aesni0: No AESNI support.
padlock0: No ACE support.
rdrand0: No RdRand support.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
hpt27xx: no controller detected.
CAM: Configuring 3 busses
CAM: finished configuring all busses
da0 at ahci0 bus 0 target 0 lun 0
da0: <SATA Hitachi HTS54251 BB2O> Fixed Direct Access SCSI-4 device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
da0: 150.000MB/s transfers
da0: 114473MB (234441648 512 byte sectors: 255H 63S/T 14593C)
cd0 at ata0 bus 0 target 0 lun 0
cd0: <MATSHITA DVD-RAM UJ870QJ 1.00> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from hammer2:serno/071117BB0200WBH5JSKC.s1d
hammer2_mount: root devstr="serno/071117BB0200WBH5JSKC.s1d"
hammer2_mount: device="serno/071117BB0200WBH5JSKC.s1d" label="ROOT" rdonly=1
hammer2_ondisk: "/dev/serno/071117BB0200WBH5JSKC.s1d" zone=1 id=0 offset=0x0000000000000000 size=0x0000001480000000
hammer2_mount: hmp=0xfffff80065a80000 pmp=0xfffff80064d67000
DMA space used: 5736k, remaining available: 62592k
Mounting devfs
hammer2_mount: "serno/071117BB0200WBH5JSKC.s1d": no recovery needed
hammer2: enable read/write
hammer2_mount: devstr="/dev/serno/071117BB0200WBH5JSKC.s1e@DATA"
hammer2_mount: device="/dev/serno/071117BB0200WBH5JSKC.s1e" label="DATA" rdonly=0
reconnect to cluster: nc=1 focus=0
not a local device mount
hammer2_ondisk: "/dev/serno/071117BB0200WBH5JSKC.s1e" zone=3 id=0 offset=0x0000000000000000 size=0x00000006b1800000
hammer2_mount: "/dev/serno/071117BB0200WBH5JSKC.s1e": no recovery needed
hammer2_mount: hmp=0xfffff80086c20000 pmp=0xfffff80064d6b200
wlan0: driver didn't set altq_maxlen
wlan0: MAC address: [_MAC_XXXXXXXXXX]
swap low/high-water marks set to 20968/31453