Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-05-05 11:00:14
From: Ken Wellsch
Description: FreeBSD/amd64 14.3-BETA1 on Sun X4600 M2
---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.3-PRERELEASE stable/14-n271313-3abb5750c321 GENERIC amd64
FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2)
VT(vga): resolution 640x480
CPU: Quad-Core AMD Opteron(tm) Processor 8389 (2892.39-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x100f42 Family=0x10 Model=0x4 Stepping=2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802009<SSE3,MON,CX16,POPCNT>
AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT>
SVM: NP,NRIP,NAsids=64
TSC: P-state invariant
real memory = 51539607552 (49152 MB)
avail memory = 50099380224 (47778 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <SUN X4600 M2>
FreeBSD/SMP: Multiprocessor System Detected: 24 CPUs
FreeBSD/SMP: 6 package(s) x 4 core(s)
random: unblocking device.
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20221020/tbfadt-748)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe1Block: 128/64 (20221020/tbfadt-748)
ioapic0 <Version 1.1> irqs 0-23
ioapic1 <Version 1.1> irqs 48-54
ioapic2 <Version 1.1> irqs 56-62
ioapic3 <Version 1.1> irqs 24-47
Launching APs: 4 18 22 1 16 21 12 13 11 15 6 2 9 14 3 19 8 5 7 20 17 10 23
random: entropy device external interface
kbd1 at kbdmux0
vtvga0: <VT VGA driver>
smbios0: <System Management BIOS> at iomem 0xfaa40-0xfaa5e
smbios0: Entry point: v2.1 (32-bit), Version: 2.5
aesni0: No AES or SHA support.
acpi0: <SUN X4600 M2>
acpi0: Power Button (fixed)
acpi0: _OSC failed: AE_BUFFER_OVERFLOW
unknown: I/O range not supported
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed00fff on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 950
hpet1: <High Precision Event Timer> iomem 0xfed10000-0xfed10fff on acpi0
apei0: <ACPI Platform Error Interface> on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe008-0xe00b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <nVidia nForce CK804 USB Controller> mem 0xfe8ff000-0xfe8fffff irq 20 at device 2.0 on pci0
usbus0 on ohci0
usbus0: 12Mbps Full Speed USB v1.0
ehci0: <NVIDIA nForce CK804 USB 2.0 controller> mem 0xfe8fec00-0xfe8fecff irq 21 at device 2.1 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xefa0-0xefaf at device 6.0 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xa800-0xa8ff mem 0xfd000000-0xfdffffff,0xfe1ff000-0xfe1fffff irq 16 at device 6.0 on pci1
vgapci0: Boot video device
pcib2: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 16.0 on pci0
pci5: <ACPI PCI bus> on pcib5
em0: <Intel(R) Legacy PRO/1000 MT 82546EB (Copper)> port 0xbc00-0xbc3f mem 0xfe2e0000-0xfe2fffff irq 48 at device 1.0 on pci5
em0: EEPROM V15.255-15
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
em1: <Intel(R) Legacy PRO/1000 MT 82546EB (Copper)> port 0xb800-0xb83f mem 0xfe2c0000-0xfe2dffff irq 49 at device 1.1 on pci5
em1: EEPROM V15.255-15
em1: Using 1024 TX descriptors and 1024 RX descriptors
em1: Ethernet address: [_MAC_XXXXXXXXXX]
em1: netmap queues/slots: TX 1/1024, RX 1/1024
em2: <Intel(R) Legacy PRO/1000 MT 82546EB (Copper)> port 0xb400-0xb43f mem 0xfe2a0000-0xfe2bffff irq 50 at device 2.0 on pci5
em2: EEPROM V15.255-15
em2: Using 1024 TX descriptors and 1024 RX descriptors
em2: Ethernet address: [_MAC_XXXXXXXXXX]
em2: netmap queues/slots: TX 1/1024, RX 1/1024
em3: <Intel(R) Legacy PRO/1000 MT 82546EB (Copper)> port 0xb000-0xb03f mem 0xfe280000-0xfe29ffff irq 51 at device 2.1 on pci5
em3: EEPROM V15.255-15
em3: Using 1024 TX descriptors and 1024 RX descriptors
em3: Ethernet address: [_MAC_XXXXXXXXXX]
em3: netmap queues/slots: TX 1/1024, RX 1/1024
pcib6: <ACPI PCI-PCI bridge> at device 17.0 on pci0
pci6: <ACPI PCI bus> on pcib6
mpt0: <LSILogic SAS/SATA Adapter> port 0xc800-0xc8ff mem 0xfe7fc000-0xfe7fffff,0xfe7e0000-0xfe7effff irq 56 at device 4.0 on pci6
mpt0: MPI Version=1.5.20.0
mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
mpt0: 0 Active Volumes (2 Max)
mpt0: 0 Hidden Drive Members (14 Max)
pcib7: <ACPI Host-PCI bridge> on acpi0
pci7: <ACPI PCI bus> on pcib7
pci7: <memory> at device 0.0 (no driver attached)
pci7: <memory> at device 1.0 (no driver attached)
pcib8: <ACPI PCI-PCI bridge> at device 12.0 on pci7
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 13.0 on pci7
pci9: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 14.0 on pci7
pci10: <ACPI PCI bus> on pcib10
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc9fff,0xca000-0xcafff,0xcb000-0xcbfff,0xcc000-0xccfff,0xcd000-0xcdfff,0xce000-0xcefff,0xd5000-0xd5fff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 15.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
cpufreq0: <CPU frequency control> on cpu0
Timecounter "TSC-low" frequency 1446157819 Hz quality 800
Timecounters tick every 1.000 msec
ugen1.1: <nVidia EHCI root HUB> at usbus1
uhub0 on usbus1
uhub0: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <nVidia OHCI root HUB> at usbus0
uhub1 on usbus0
uhub1: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Trying to mount root from zfs:zroot/ROOT/default []...
da0 at mpt0 bus 0 scbus2 target 0 lun 0
da0: <SEAGATE ST914602SSUN146G 0603> Fixed Direct Access SPC-3 SCSI device
da0: [_SERIAL_NUMBER_XXXXX] 3NM7HS64
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 140009MB (286739329 512 byte sectors)
da1 at mpt0 bus 0 scbus2 target 1 lun 0
da1: <SEAGATE ST914602SSUN146G 0400> Fixed Direct Access SPC-3 SCSI device
da1: [_SERIAL_NUMBER_XXXXX] 3NM1JSXT
da1: 300.000MB/s transfers
da1: Command Queueing enabled
da1: 140009MB (286739329 512 byte sectors)
cd0 at ata0 bus 0 scbus0 target 0 lun 0
cd0: <MATSHITA CD-RW CW-8124 DZ13> Removable CD-ROM SCSI device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
uhub1: 7 ports with 7 removable, self powered
Root mount waiting for: usbus1
Root mount waiting for: usbus1
uhub0: 7 ports with 7 removable, self powered
Root mount waiting for: usbus1
ugen0.2: <vendor 0x0430 product 0x0005> at usbus0
ukbd0 on uhub1
ukbd0: <vendor 0x0430 product 0x0005, class 0/0, rev 1.00/1.02, addr 2> on usbus0
kbd2 at ukbd0
ugen1.2: <vendor 0x04b4 product 0x6560> at usbus1
uhub2 on uhub0
uhub2: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 2> on usbus1
uhub2: MTT enabled
ugen0.3: <American Megatrends Inc. Virtual Keyboard and Mouse> at usbus0
ukbd1 on uhub1
ukbd1: <American Megatrends Inc. Virtual Keyboard and Mouse, class 0/0, rev 1.10/1.00, addr 3> on usbus0
kbd3 at ukbd1
Root mount waiting for: usbus1
uhub2: 4 ports with 4 removable, self powered
em0: link state changed to UP
lo0: link state changed to UP
em0: link state changed to DOWN
em0: link state changed to UP
ums0 on uhub1
ums0: <American Megatrends Inc. Virtual Keyboard and Mouse, class 0/0, rev 1.10/1.00, addr 3> on usbus0
Security policy loaded: MAC/ntpd (mac_ntpd)