Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-07-03 03:19:15
From: Garrett Wollman
Description: Dell PowerEdge R360/2.5"/HBA355
---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.3-RELEASE-p1 #36 releng/14.3-n271434-2ea99b8ed142-dirty: Wed Jul 2 23:10:44 EDT 2025
[_EMAIL_XXXXXXXXXXXXXXXXXXX]:/usr/obj/usr/src/amd64.amd64/sys/ISFAHEL amd64
FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2)
VT(efifb): resolution 1024x768
CPU: Intel(R) Xeon(R) 6333P (3110.40-MHz K8-class CPU)
Origin="GenuineIntel" Id=0xb0671 Family=0x6 Model=0xb7 Stepping=1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0x239c27eb<FSGSBASE,TSCADJ,BMI1,AVX2,FDPEXC,SMEP,BMI2,ERMS,INVPCID,NFPUSG,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,PROCTRACE,SHA>
Structured Extended Features2=0x98c027bc<UMIP,PKU,OSPKE,WAITPKG,GFNI,VAES,VPCLMULQDQ,TME,RDPID,MOVDIRI,MOVDIR64B>
Structured Extended Features3=0xfc1c4410<FSRM,MD_CLEAR,PCONFIG,IBT,IBPB,STIBP,L1DFL,ARCH_CAP,CORE_CAP,SSBD>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
IA32_ARCH_CAPS=0xcc8fd6b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TAA_NO>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 34358689792 (32767 MB)
avail memory = 33150386176 (31614 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL PE_SC3 >
FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119
Launching APs: 1 9 8 5 4 3 11 7 6 2 10
random: entropy device external interface
kbd0 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0x56ec5000-0x56ec501e
smbios0: Entry point: v2.1 (32-bit), Version: 3.3, BCD Revision: 3.3
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <DELL PE_SC3>
acpi0: Power Button (fixed)
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 19200000 Hz quality 950
Event timer "HPET" frequency 19200000 Hz quality 350
Event timer "HPET1" frequency 19200000 Hz quality 340
Event timer "HPET2" frequency 19200000 Hz quality 340
Event timer "HPET3" frequency 19200000 Hz quality 340
Event timer "HPET4" frequency 19200000 Hz quality 340
Event timer "HPET5" frequency 19200000 Hz quality 340
Event timer "HPET6" frequency 19200000 Hz quality 340
Event timer "HPET7" frequency 19200000 Hz quality 340
atrtc1: <AT realtime clock> on acpi0
atrtc1: Warning: Couldn't map I/O.
atrtc1: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
mpr0: <Broadcom Inc. (LSI) HARD SEC SAS3816> port 0x3000-0x30ff mem 0x4000100000-0x40001fffff,0x4000000000-0x40000fffff,0x61900000-0x619fffff at device 0.0 on pci1
mpr0: Firmware:[_IP_XXXXXX], Driver:[_IP_XXXXXX]-fbsd
mpr0: IOCCapabilities: 2fa84c<ScsiTaskFull,DiagTrace,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc,FastPath,RDPQArray,AtomicReqDesc>
xhci0: <XHCI (generic) USB 3.0 controller> mem 0x4000300000-0x400030ffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <memory, RAM> at device 20.2 (no driver attached)
pci0: <simple comms> at device 22.0 (no driver attached)
ahci0: <AHCI SATA controller> port 0x4040-0x4047,0x4048-0x404b,0x4020-0x403f mem 0x61a40000-0x61a41fff,0x61a44000-0x61a440ff,0x61a43000-0x61a437ff at device 23.0 on pci0
ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci3
pci4: <PCI bus> on pcib4
vgapci0: <VGA-compatible display> mem 0x60000000-0x60ffffff,0x61808000-0x6180bfff,0x61000000-0x617fffff at device 0.0 on pci4
vgapci0: Boot video device
pcib5: <ACPI PCI-PCI bridge> at device 28.6 on pci0
pci5: <ACPI PCI bus> on pcib5
bge0: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x4000250000-0x400025ffff,0x4000240000-0x400024ffff,0x4000230000-0x400023ffff at device 0.0 on pci5
bge0: APE FW version: NCSI v1.5.61.0
bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: [_MAC_XXXXXXXXXX]
bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0x4000220000-0x400022ffff,0x4000210000-0x400021ffff,0x4000200000-0x400020ffff at device 0.1 on pci5
bge1: APE FW version: NCSI v1.5.61.0
bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus1: <MII bus> on bge1
brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: [_MAC_XXXXXXXXXX]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus> at device 31.5 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
cpu0: <ACPI CPU> on acpi0
apei0: <ACPI Platform Error Interface> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: console (115200,n,8,1)
ipmi0: <IPMI System Interface> port 0xca8,0xcac irq 10 on acpi0
ipmi0: KCS mode found at io 0xca8 on acpi
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
vga0: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff pnpid PNP0900 on isa0
atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
atrtc0: Can't map interrupt.
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
hwpstate_intel0: <Intel Speed Shift> on cpu0
cpufreq0: <CPU frequency control> on cpu0
hwpstate_intel1: <Intel Speed Shift> on cpu1
cpufreq1: <CPU frequency control> on cpu1
hwpstate_intel2: <Intel Speed Shift> on cpu2
cpufreq2: <CPU frequency control> on cpu2
hwpstate_intel3: <Intel Speed Shift> on cpu3
cpufreq3: <CPU frequency control> on cpu3
hwpstate_intel4: <Intel Speed Shift> on cpu4
cpufreq4: <CPU frequency control> on cpu4
hwpstate_intel5: <Intel Speed Shift> on cpu5
cpufreq5: <CPU frequency control> on cpu5
hwpstate_intel6: <Intel Speed Shift> on cpu6
cpufreq6: <CPU frequency control> on cpu6
hwpstate_intel7: <Intel Speed Shift> on cpu7
cpufreq7: <CPU frequency control> on cpu7
hwpstate_intel8: <Intel Speed Shift> on cpu8
cpufreq8: <CPU frequency control> on cpu8
hwpstate_intel9: <Intel Speed Shift> on cpu9
cpufreq9: <CPU frequency control> on cpu9
hwpstate_intel10: <Intel Speed Shift> on cpu10
cpufreq10: <CPU frequency control> on cpu10
hwpstate_intel11: <Intel Speed Shift> on cpu11
cpufreq11: <CPU frequency control> on cpu11
Timecounter "TSC-low" frequency 1555204248 Hz quality 1000
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled
module_register_init: MOD_LOAD (sctp, 0xffffffff8075b330, 0) error 17
ugen0.1: <Intel XHCI root HUB> at usbus0
uhub0 on usbus0
uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ipmi0: IPMI device rev. 1, firmware rev. 7.20, version 2.0, device support mask 0xdf
mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x0017> enclosureHandle<0x0002> slot 0
mpr0: At enclosure level 1 and connector name (C0 )
ipmi0: Number of channels 6
mpr0: Found device <881<SataDev,Direct>,End Device> <6.0Gbps> handle<0x0018> enclosureHandle<0x0002> slot 1
ipmi0: Attached watchdog
mpr0: At enclosure level 1 and connector name (C0 )
mpr0: Found device <5c01<SspTarg,Direct,LsiDev,SepDev>,End Device> <3.0Gbps> handle<0x0012> enclosureHandle<0x0002> slot 8
ipmi0: Establishing power cycle handler
mpr0: At enclosure level 1 and connector name (C0 )
pmc: Unknown Intel CPU.
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI>ses0 at mpr0 bus 0 scbus0 target 8 lun 0
ses0: <DP BP_PSV 7.10> Fixed Enclosure Services SPC-5 SCSI device
ses0: [_SERIAL_NUMBER_XXXXXXXXXXXXX]
ses0: 300.000MB/s transfers
ses0: SES Device
da0 at mpr0 bus 0 scbus0 target 0 lun 0
da0: <ATA Samsung SSD 883 404Q> Fixed Direct Access SPC-4 SCSI device
da0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da0: 600.000MB/s transfers
da0: Command Queueing enabled
da0: 915715MB (1875385008 512 byte sectors)
da1 at mpr0 bus 0 scbus0 target 1 lun 0
da1: <ATA Samsung SSD 883 404Q> Fixed Direct Access SPC-4 SCSI device
da1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 915715MB (1875385008 512 byte sectors)
Trying to mount root from zfs:tank/BE/14.3 []...
ses1 at ahciem0 bus 0 scbus6 target 0 lun 0
ses1: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses1: SEMB SES Device
ses0: da0,pass0 in Array Device Slot 9, SAS Slot: 1 phys at slot 0
ses0: phy 0: SATA device
ses0: phy 0: parent 5f4ee0807ec45a08 addr 3f4ee0807ec45a08
ses0: da1,pass1 in Array Device Slot 10, SAS Slot: 1 phys at slot 1
ses0: phy 0: SATA device
ses0: phy 0: parent 5f4ee0807ec45a09 addr 3f4ee0807ec45a09
GEOM_MIRROR: Device mirror/swap launched (2/2).
uhub0: 26 ports with 26 removable, self powered
Root mount waiting for: usbus0
ugen0.2: <vendor 0x1604 product 0x10c0> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 1> on usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
uhub1: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
ugen0.3: <vendor 0x1604 product 0x10c0> at usbus0
uhub2 on uhub1
uhub2: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 2> on usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
uhub2: 4 ports with 4 removable, self powered
ugen0.4: <vendor 0x1604 product 0x10c0> at usbus0
uhub3 on uhub1
uhub3: <vendor 0x1604 product 0x10c0, class 9/0, rev 2.00/0.00, addr 3> on usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
uhub3: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
ugen0.5: <vendor 0x0430 product 0x100e> at usbus0
uhub4 on uhub0
uhub4: <vendor 0x0430 product 0x100e, class 9/0, rev 2.00/1.03, addr 4> on usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
uhub4: 4 ports with 3 removable, bus powered
ugen0.6: <vendor 0x0430 Sun USB Keyboard> at usbus0
ukbd0 on uhub4
ukbd0: <vendor 0x0430 Sun USB Keyboard, class 0/0, rev 2.00/1.03, addr 5> on usbus0
kbd1 at ukbd0
Dual Console: Serial Primary, Video Secondary
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
acpi_wmi0: Embedded MOF found
ACPI: \134_SB.AMW0.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361)