Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-09-13 10:35:04
From: vinishor
Description: OpenBSD on a Sun Netra T1 AC200
console is /pci@1f,0/pci@1,1/isa@7/serial@0,2e8
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2025 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 7.7 (GENERIC) #2363: Sun Apr 13 12:33:57 MDT 2025
[_EMAIL_XXXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/sparc64/compile/GENERIC
real mem = 536870912 (512MB)
avail mem = 508723200 (485MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: Netra T1 200 (UltraSPARC-IIe 500MHz)
cpu0 at mainbus0: SUNW,UltraSPARC-IIe (rev 1.4) @ 500 MHz
cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 256K external (64 b/l)
psycho0 at mainbus0: SUNW,sabre, impl 0, version 0, ign 7c0
psycho0: bus range 0-2, PCI bus 0
psycho0: dvma map c0000000-dfffffff
pci0 at psycho0
ppb0 at pci0 dev 1 function 1 "Sun Simba" rev 0x13
pci1 at ppb0 bus 1
ebus0 at pci1 dev 12 function 0 "Sun RIO EBus" rev 0x01
"flashprom" at ebus0 addr 0-fffff not configured
clock1 at ebus0 addr 0-1fff: mk48t59
lom0 at ebus0 addr 200000-200003 ivec 0x2a: LOMlite2 rev 3.12
alipm0 at pci1 dev 3 function 0 "Acer Labs M7101 Power" rev 0x00: 74KHz clock
iic0 at alipm0
"max1617" at alipm0 addr 0x18 skipped due to alipm0 bugs
spdmem0 at iic0 addr 0x54: 256MB SDRAM registered ECC PC133CL2
spdmem1 at iic0 addr 0x55: 256MB SDRAM registered ECC PC133CL2
ebus1 at pci1 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
power0 at ebus1 addr 2000-2007 ivec 0x25
com0 at ebus1 addr 3f8-3ff ivec 0x2b: ns16550a, 16 byte fifo
com1 at ebus1 addr 2e8-2ef ivec 0x2b: ns16550a, 16 byte fifo
com1: console
gem0 at pci1 dev 12 function 1 "Sun ERI" rev 0x01: ivec 0x7c6, address [_MAC_XXXXXXXXXX]
ukphy0 at gem0 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI 0x0010dd, model 0x0002
ohci0 at pci1 dev 12 function 3 "Sun USB" rev 0x01: ivec 0x7e4, version 1.0, legacy support
pciide0 at pci1 dev 13 function 0 "Acer Labs M5229 IDE" rev 0xc3: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x7cc for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TEAC, CD-224E, 1.7A> removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
gem1 at pci1 dev 5 function 1 "Sun ERI" rev 0x01: ivec 0x7dc, address [_MAC_XXXXXXXXXX]
ukphy1 at gem1 phy 1: Generic IEEE 802.3u media interface, rev. 1: OUI 0x0010dd, model 0x0002
ohci1 at pci1 dev 5 function 3 "Sun USB" rev 0x01: ivec 0x7e6, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0 configuration 1 interface 0 "Sun OHCI root hub" rev 1.00/1.00 addr 1
usb1 at ohci1: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Sun OHCI root hub" rev 1.00/1.00 addr 1
ppb1 at pci0 dev 1 function 0 "Sun Simba" rev 0x13
pci2 at ppb1 bus 2
siop0 at pci2 dev 8 function 0 "Symbios Logic 53c896" rev 0x07: ivec 0x7e0, using 8K of on-board RAM
scsibus2 at siop0: 16 targets, initiator 7
sym0 at scsibus2 targ 0 lun 0: <SEAGATE, ST336605LSUN36G, 0638> serial.SEAGATE_ST336605LSUN36G_3FP0F8TM00002243G3D3
sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST336605LSUN36G, 0638> serial.SEAGATE_ST336605LSUN36G_3FP0F8TM00002243G3D3
sd0: 34732MB, 512 bytes/sector, 71132959 sectors
siop1 at pci2 dev 8 function 1 "Symbios Logic 53c896" rev 0x07: ivec 0x7e0, using 8K of on-board RAM
scsibus3 at siop1: 16 targets, initiator 7
siop0: target 0 now using tagged 16 bit 40.0 MHz 31 REQ/ACK offset xfers
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
bootpath: /pci@1f,0/pci@1,0/scsi@8,0/disk@0,0
root on sd0a (55e99c2a6bc95495.a) swap on sd0b dump on sd0b