NYC*BUG dmesgd

Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

---

Date: 2025-10-13 18:34:06
From: Ken Wellsch
Description: OpenBSD/sgi 6.9 MP on SGI Octane

System Maintenance Menu

1) Start System
2) Install System Software
3) Run Diagnostics
4) Recover System
5) Enter Command Monitor

Option? 5
Command Monitor.  Type "exit" to return to the menu.
>> hinv
                   System: IP30
                Processor: 300 Mhz R12000, 2M secondary cache
                Processor: 300 Mhz R12000, 2M secondary cache, (cpu 1)
              Memory size: 1536 Mbytes
                  Network: ef0 ethernet (100/10 base-T)
                SCSI Disk: scsi(0)disk(1)
                SCSI Disk: scsi(0)disk(2)
                SCSI Disk: scsi(0)disk(3)
                SCSI Disk: scsi(1)disk(2)
               SCSI CDROM: scsi(1)cdrom(5)
                    Audio: RAD Audio Processor
                 Graphics: ESI
>> scsi(0)disk(1)rdisk(0)partition(8)/boot
1024+43584+4368+1696+400 entry: 0xa80000005fff0000

OpenBSD/sgi-IP30 ARCBios boot version 1.13
arg 0: scsi(0)disk(1)rdisk(0)partition(8)/boot
arg 1: ConsoleIn=serial(0)
arg 2: ConsoleOut=serial(0)
arg 3: SystemPartition=xio(0)pci(15)scsi(0)disk(1)rdisk(0)partition(8)
arg 4: OSLoader=sash
arg 5: OSLoadPartition=xio(0)pci(15)scsi(0)disk(1)rdisk(0)partition(0)
arg 6: OSLoadFilename=/bsd
Boot: xio(0)pci(15)scsi(0)disk(1)rdisk(0)partition(0)/bsd
7259600+717264 [120+88+419448+263003]=0x842548
ARCS64 Firmware
Found SGI-IP30, setting up.
Initial setup done, switching console.
[ using 683432 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2021 OpenBSD. All rights reserved.  https://www.OpenBSD.org

OpenBSD 6.9 (GENERIC-IP30.MP) #0: Thu Apr 22 07:17:11 UTC 2021
    [_EMAIL_XXXXXXX]:/usr/src/sys/arch/sgi/compile/GENERIC-IP30.MP
real mem = 1610612736 (1536MB)
rsvd mem = 1064960 (2MB)
avail mem = 1586495488 (1513MB)
random: boothowto does not indicate good seed
mainbus0 at root: Octane
cpu0 at mainbus0: MIPS R12000 CPU rev 2.3 300 MHz, R10000 FPU rev 0.0
cpu0: cache L1-I 32KB D 32KB 2 way, L2 2048KB 2 way
cpu1 at mainbus0: MIPS R12000 CPU rev 2.3 300 MHz, R10000 FPU rev 0.0
cpu1: cache L1-I 32KB D 32KB 2 way, L2 2048KB 2 way
clock0 at mainbus0: int 5
xbow0 at mainbus0: XBow revision 5
xheart0 at xbow0 widget 8: Heart revision 6
onewire0 at xheart0
owserial0 at onewire0 "16kb EPROM" sn 0000004047d4
owserial0: "PM20300MHZ" p/n 030-1356-001, serial KWF400
xbridge0 at xbow0 widget 15: Bridge revision 4
xbpci0 at xbridge0 bus 0: 33 MHz PCI bus
pci0 at xbpci0 bus 0
qlw0 at pci0 dev 0 function 0 "QLogic ISP1020" rev 0x05: irq 0, xbow irq 14
qlw0: nvram corrupt
qlw0: firmware rev 4.66.0, attrs 0x0
scsibus0 at qlw0: 16 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SGI, IBM DNES-318350Y, SA30> serial.SGI_IBM_DNES-318350Y_AKG3F289
sd0: 17364MB, 512 bytes/sector, 35563040 sectors
sd1 at scsibus0 targ 2 lun 0: <, , S7Z0> naa.5005076007eedbb0
sd1: 35003MB, 512 bytes/sector, 71687340 sectors
sd2 at scsibus0 targ 3 lun 0: <SEAGATE, ST173404LC, 0003> serial.SEAGATE_ST173404LC_1CE0751200007036HJ4R
sd2: 70007MB, 512 bytes/sector, 143374738 sectors
qlw1 at pci0 dev 1 function 0 "QLogic ISP1020" rev 0x05: irq 1, xbow irq 13
qlw1: nvram corrupt
qlw1: firmware rev 4.66.0, attrs 0x0
scsibus1 at qlw1: 16 targets, initiator 0
sd3 at scsibus1 targ 2 lun 0: <ZULUSCSI, HARDDRIVE, 2.3W> serial.ZULUSCSIHARDDRIVE_42F55FF8
sd3: 4095MB, 512 bytes/sector, 8386560 sectors
cd0 at scsibus1 targ 5 lun 0: <ZULUSCSI, CDROM, 2.3W> removable serial.ZULUSCSICDROM_42F55FF8
ioc0 at pci0 dev 2 function 0 "SGI IOC3" rev 0x01
onewire1 at ioc0
owmac0 at onewire1 "1kb EPROM" sn 000002b14eaf
owmac0: Ethernet Address [_MAC_XXXXXXXXXX]
owserial1 at onewire1 "16kb EPROM" sn 00000048d502
owserial1: "PWR.SPPLY.ER" p/n 060-0035-002, serial AAE0210349
owserial2 at onewire1 "16kb EPROM" sn 0000004cf07a
owserial2: "FP1" p/n 030-0891-003, serial KZB496
ioc0: ethernet irq 2, xbow irq 12
ioc0: superio irq 4, xbow irq 11
com0 at ioc0 base 0x20178: ns16550a, 16 byte fifo
com0: console
com1 at ioc0 base 0x20170: ns16550a, 16 byte fifo
iockbc0 at ioc0
iec0 at ioc0: 128KB SSRAM, address [_MAC_XXXXXXXXXX]
icsphy0 at iec0 phy 1: ICS1890 10/100 PHY, rev. 3
lpt at ioc0 not configured
dsrtc0 at ioc0: DS1687
"SGI Rad1" rev 0xc0 at pci0 dev 3 function 0 not configured
impact0 at xbow0 widget 12: ImpactSR device has not been setup by firmware!
power0 at mainbus0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
boot device: sd0
root on sd0a (cffd2bfddb148877.a) swap on sd0b dump on sd0b
Automatic boot in progress: starting file system checks.
/dev/sd0a (cffd2bfddb148877.a): file system is clean; not checking
/dev/sd0k (cffd2bfddb148877.k): file system is clean; not checking
/dev/sd0d (cffd2bfddb148877.d): file system is clean; not checking
/dev/sd0f (cffd2bfddb148877.f): file system is clean; not checking
/dev/sd0g (cffd2bfddb148877.g): file system is clean; not checking
/dev/sd0h (cffd2bfddb148877.h): file system is clean; not checking
/dev/sd0j (cffd2bfddb148877.j): file system is clean; not checking
/dev/sd0i (cffd2bfddb148877.i): file system is clean; not checking
/dev/sd0e (cffd2bfddb148877.e): file system is clean; not checking
pf enabled
starting network
iec0:[_IP_XXXXXXXXX] lease accepted from[_IP_XXXXXXX] ([_MAC_XXXXXXXXXX])
reordering libraries: done.
openssl: generating isakmpd/iked RSA keys... done.
ssh-keygen: generating new host keys: RSA DSA ECDSA ED25519 
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd sndiod.
running rc.firsttime
Path to firmware: http://firmware.openbsd.org/firmware/6.9/
No devices found which need firmware files to be downloaded.
starting local daemons: cron.
Mon Oct 13 14:25:18 EDT 2025

OpenBSD/sgi (octane.localhost) (console)

login: root
Password:
OpenBSD 6.9 (GENERIC-IP30.MP) #0: Thu Apr 22 07:17:11 UTC 2021

Welcome to OpenBSD: The proactively secure Unix-like operating system.

Please use the sendbug(1) utility to report bugs in the system.
Before reporting a bug, please try to reproduce it with the latest
version of the code.  With bug reports, please try to ensure that
enough information to reproduce the problem is enclosed, and if a
known fix for it exists, include that as well.

You have mail.

octane# dd if=/dev/rsd3c of=/dev/null bs=1m count=500
500+0 records in
500+0 records out
524288000 bytes transferred in 23.892 secs (21943348 bytes/sec)

octane# dd if=/dev/rsd0c of=/dev/null bs=1m count=500
500+0 records in
500+0 records out
524288000 bytes transferred in 25.991 secs (20171150 bytes/sec)

octane# dd if=/dev/rsd2c of=/dev/null bs=1m count=500
500+0 records in
500+0 records out
524288000 bytes transferred in 23.444 secs (22362789 bytes/sec)

All comments/news/posts are the property of their individual owner and is presented without warranty of suitability, and solely as an informational resource.
This site Copyright © 2004-2025 NYC*BUG.