Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-10-19 06:43:02
From: robohack
Description: NetBSD/amd64 on Dell Inc. PowerEdge 2950
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019, 2020, 2021 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 9.99.81 (XEN3_DOM0) #0: Sun Dec 8 17:37:05 PST 2024
woods@xentastic:/build/woods/xentastic/current-amd64-amd64-obj/build/src/sys/arch/amd64/compile/XEN3_DOM0
total memory = 4096 MB
avail memory = 3939 MB
entropy: seed attached as an entropy source (collecting)
entropy: autoconf attached as an entropy source (collecting without estimation)
timecounter: Timecounters tick every 1.000 msec
entropy: system-power attached as an entropy source (collecting)
Kernelized RAIDframe activated
Dell Inc. PowerEdge 2950
mainbus0 (root)
ACPI: RSDP 0x00000000000F1CE0 000024 (v02 DELL )
ACPI: XSDT 0x00000000000F1D7C 000084 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 0x00000000000F1EBC 0000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT 0x000000007FB66000 0049A6 (v01 DELL PE_SC3 00000001 INTL 20050624)
ACPI: FACS 0x000000007FB85C00 000040
ACPI: APIC 0x00000000000F1FB0 000092 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 0x00000000000F2067 000050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 0x00000000000F20B7 000038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 0x00000000000F20EF 00003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: WDAT 0x00000000000F212B 000134 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SLIC 0x00000000000F225F 000024 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: ERST 0x000000007FB6AB28 000210 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HEST 0x000000007FB6AD38 00027C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: BERT 0x000000007FB6A9A8 000030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: EINJ 0x000000007FB6A9D8 000150 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: TCPA 0x00000000000F23E1 000064 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: 1 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 8: pa 0xfec00000, virtual wire mode, version 0x20, 24 pins
ioapic0: autoconfiguration error: can't remap to apid 8
cpu0 at mainbus0 apid 0
cpu1 at mainbus0 apid 4
cpu2 at mainbus0 apid 1
cpu3 at mainbus0 apid 5
cpu4 at mainbus0 apid 2
cpu5 at mainbus0 apid 6
cpu6 at mainbus0 apid 3
cpu7 at mainbus0 apid 7
ipmi0 at mainbus0
hypervisor0 at mainbus0: Xen version 4.13.4nb0
hypervisor0: Xen Domain-0 name not set on command line
hypervisor0: features: pae_pgdir_above_4gb mmu_pt_update_preserve_ad highmem_assist gnttab_map_avail_bits
VIRQ_DEBUG interrupt using event channel 1
vcpu0 at hypervisor0
event_set_handler: id:<NULL>, xname:vcpu0 ipi, handler:(*0xffffffff80202891)(), evtch 2, level 8
event_set_handler: id:xenev0 chan 2, xname:vcpu0 ipi, attaching evtch 2 to VCPU vcpu0 0
vcpu0: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz, id 0x10676
vcpu0: node 0, package 0, core 0, smt 0
vcpu0: idle lwp at 0xffffad0007baf040, idle sp at 0xffffad00d2804ed0
vcpu1 at hypervisor0
vcpu1: Intel(R) Xeon(R) CPU E5440 @ 2.83GHz, id 0x10676
vcpu1: node 0, package 0, core 0, smt 0
vcpu1: idle lwp at 0xffffad0008413180, idle sp at 0xffffad00d2615ed0
xenbus0 at hypervisor0: Xen Virtual Bus Interface
xencons0 at hypervisor0: Xen Virtual Console Driver
xencons0: console, major 143, unit 0
event_set_handler: id:xenev0 chan 3, xname:xencons0, handler:(*0xffffffff8021210a)(), evtch 3, level 6
event_set_handler: id:xenev0 chan 3, xname:xencons0, attaching and binding evtch 3 to current VCPU vcpu0 0
xencons0: using event channel 3
acpi0 at hypervisor0: Intel ACPICA 20201113
acpi0: X/RSDT: OemId <DELL ,PE_SC3 ,00000001>, AslId <DELL,00000001>
ioapic0: int9 0x18958<vector=0x58,delmode=0x1=low,logical,acthi,level,masked,dest=0> 0x1000000<target=0x1>
event_set_handler: id:ioapic0 pin 9, xname:acpi SCI, handler:(*0xffffffff80209230)(), evtch 4, level 6
event_set_handler: id:ioapic0 pin 9, xname:acpi SCI, attaching and binding evtch 4 to current VCPU vcpu0 0
mpacpi: found root PCI bus 0
mpacpi: found subordinate bus 4
mpacpi: found subordinate bus 5
mpacpi: found subordinate bus 6
mpacpi: found subordinate bus 8
mpacpi: found subordinate bus 1
mpacpi: found subordinate bus 10
mpacpi: found subordinate bus 12
mpacpi: found subordinate bus 2
mpacpi: found subordinate bus 14
mpacpi: 10 PCI busses
mpacpi: ISA interrupt override 0 -> 2 (0/0)
mpacpi: ISA interrupt override 9 -> 9 (1/3)
mpacpi: configuring PCI bus 0 int routing
mpacpi: configuring PCI bus 4 int routing
mpacpi: configuring PCI bus 5 int routing
mpacpi: configuring PCI bus 6 int routing
mpacpi: configuring PCI bus 8 int routing
mpacpi: configuring PCI bus 1 int routing
mpacpi: configuring PCI bus 10 int routing
mpacpi: configuring PCI bus 12 int routing
mpacpi: configuring PCI bus 2 int routing
mpacpi: configuring PCI bus 14 int routing
ioapic0: pin 2 attached to isa0 irq 0 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 1 attached to isa0 irq 1 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 3 attached to isa0 irq 3 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 4 attached to isa0 irq 4 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 5 attached to isa0 irq 5 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 6 attached to isa0 irq 6 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 7 attached to isa0 irq 7 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 8 attached to isa0 irq 8 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 9 attached to isa0 irq 9 (type 0<type=0> flags 0xd<pol=0x1=Act Hi,trig=0x3=Level>)
ioapic0: pin 10 attached to isa0 irq 10 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 11 attached to isa0 irq 11 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 12 attached to isa0 irq 12 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 13 attached to isa0 irq 13 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 14 attached to isa0 irq 14 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 15 attached to isa0 irq 15 (type 0<type=0> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 0x1<type=0x1=NMI> flags 0<pol=0,trig=0>)
ioapic0: pin 16 attached to pci0 device 0 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci0 device 2 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci0 device 3 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci0 device 4 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci0 device 5 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci0 device 6 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci0 device 7 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci0 device 8 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci0 device 28 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 17 attached to pci0 device 28 INT_B (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 18 attached to pci0 device 28 INT_C (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 19 attached to pci0 device 28 INT_D (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 21 attached to pci0 device 29 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 20 attached to pci0 device 29 INT_B (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 21 attached to pci0 device 29 INT_C (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 20 attached to pci0 device 29 INT_D (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci0 device 31 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 17 attached to pci0 device 31 INT_B (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 23 attached to pci0 device 31 INT_C (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci4 device 0 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 17 attached to pci4 device 0 INT_B (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 18 attached to pci4 device 0 INT_C (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 19 attached to pci4 device 0 INT_D (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci5 device 0 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci5 device 1 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci6 device 0 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 17 attached to pci6 device 0 INT_B (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 18 attached to pci6 device 0 INT_C (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 19 attached to pci6 device 0 INT_D (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 17 attached to pci8 device 0 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 18 attached to pci8 device 0 INT_B (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 19 attached to pci8 device 0 INT_C (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci8 device 0 INT_D (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci1 device 0 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 17 attached to pci1 device 0 INT_B (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 18 attached to pci1 device 0 INT_C (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 19 attached to pci1 device 0 INT_D (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci10 device 0 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 17 attached to pci10 device 0 INT_B (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 18 attached to pci10 device 0 INT_C (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 19 attached to pci10 device 0 INT_D (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci12 device 0 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 17 attached to pci12 device 0 INT_B (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 18 attached to pci12 device 0 INT_C (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 19 attached to pci12 device 0 INT_D (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci2 device 0 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 17 attached to pci2 device 0 INT_B (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 18 attached to pci2 device 0 INT_C (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 19 attached to pci2 device 0 INT_D (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 19 attached to pci14 device 13 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
WHEA (PNP0C33) at acpi0 not configured
SPK (PNP0C01) at acpi0 not configured
TMR (PNP0100) at acpi0 not configured
COMA (PNP0501) at acpi0 not configured
COMB (PNP0501) at acpi0 not configured
MBIO (PNP0C01) at acpi0 not configured
ipmi_acpi0 at acpi0 (NIPM, IPI0001-5): io 0xca8,0xcac
HPET (PNP0103) at acpi0 not configured
ACPI: Enabled 1 GPEs in block 00 to 1F
pci0 at hypervisor0 bus 0: configuration mode 1
hypervisor0: added to list as bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0: Intel 5000X Memory Controller Hub (rev. 0x12)
ppb0 at pci0 dev 2 function 0: Intel 5000 Series Chipset PCI Express x4 Port 2 (rev. 0x12)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x4 @ 2.5GT/s
pci1 at ppb0 bus 4
ppb0: added to list as bus 4
pci1: i/o space, memory space enabled
ppb1 at pci1 dev 0 function 0: Intel 63xxESB PCI Express Upstream Port (rev. 0x01)
ppb1: PCI Express capability version 1 <Upstream Port of PCI-E Switch>
pci2 at ppb1 bus 5
ppb1: added to list as bus 5
pci2: i/o space, memory space enabled
ppb2 at pci2 dev 0 function 0: Intel 63xxESB PCI Express Downstream Port #1 (rev. 0x01)
ppb2: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s
pci3 at ppb2 bus 6
ppb2: added to list as bus 6
pci3: i/o space, memory space enabled
ppb3 at pci3 dev 0 function 0: ServerWorks BCM5714/BCM5715 Integral PCI-E to PCI-X Bridge (rev. 0xc3)
ppb3: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
pci4 at ppb3 bus 7
ppb3: added to list as bus 7
pci4: i/o space, memory space enabled
bnx0 at pci4 dev 0 function 0: Broadcom NetXtreme II BCM5708 1000Base-T
bnx0: Ethernet address [_MAC_XXXXXXXXXX]
bnx0: ASIC BCM5708 B2 (0x57081020)
bnx0: PCI-X 64bit 133MHz
bnx0: B/C (3.5.12); Bufs (RX:2;TX:2); Flags (MFW); MFW (UMP 1.1.8)
bnx0: Coal (RX:6,6,18,18; TX:20,20,80,80)
brgphy0 at bnx0 phy 1: BCM5708C 1000BASE-T media interface, rev. 6
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ioapic0: int16 0x1a998<vector=0x98,delmode=0x1=low,logical,actlo,level,masked,dest=0> 0xff000000<target=0xff>
event_set_handler: id:ioapic0 pin 16, xname:bnx0, handler:(*0xffffffff80209230)(), evtch 5, level 6
event_set_handler: id:ioapic0 pin 16, xname:bnx0, attaching and binding evtch 5 to current VCPU vcpu0 0
bnx0: interrupting at ioapic0 pin 16
ppb4 at pci2 dev 1 function 0: Intel 63xxESB PCI Express Downstream Port #2 (rev. 0x01)
ppb4: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s
pci5 at ppb4 bus 8
ppb4: added to list as bus 8
pci5: i/o space, memory space enabled
mfi0 at pci5 dev 0 function 0ioapic0: int17 0x1a9a0<vector=0xa0,delmode=0x1=low,logical,actlo,level,masked,dest=0> 0xff000000<target=0xff>
event_set_handler: id:ioapic0 pin 17, xname:mfi0, handler:(*0xffffffff80209230)(), evtch 6, level 6
event_set_handler: id:ioapic0 pin 17, xname:mfi0, attaching and binding evtch 6 to current VCPU vcpu0 0
: Dell PERC 6/e
mfi0: interrupting at ioapic0 pin 17
mfi0: PERC 6/E Adapter version 6.0.1-0080
mfi0: logical drives 0, 512MB RAM, BBU type BBU, status bad
scsibus0 at mfi0: 64 targets, 8 luns per target
ppb5 at pci1 dev 0 function 3: Intel 63xxESB PCI Express to PCI-X Bridge (rev. 0x01)
ppb5: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
pci6 at ppb5 bus 9
ppb5: added to list as bus 9
pci6: i/o space, memory space enabled
ppb6 at pci0 dev 3 function 0: Intel 5000 Series Chipset PCI Express x4 Port 3 (rev. 0x12)
ppb6: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x4 @ 2.5GT/s
pci7 at ppb6 bus 1
ppb6: added to list as bus 1
pci7: i/o space, memory space enabled
mfi1 at pci7 dev 0 function 0event_set_handler: id:ioapic0 pin 16, xname:mfi1, handler:(*0xffffffff80209230)(), evtch 5, level 6
: Dell PERC 6/i integrated
mfi1: interrupting at ioapic0 pin 16
mfi1: PERC 6/i Integrated version 6.0.1-0080
mfi1: logical drives 2, 256MB RAM, BBU type BBU, status good
scsibus1 at mfi1: 64 targets, 8 luns per target
ppb7 at pci0 dev 4 function 0: Intel 5000 Series Chipset PCI Express x8 Port 4-5 (rev. 0x12)
ppb7: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x8 @ 2.5GT/s
pci8 at ppb7 bus 10
ppb7: added to list as bus 10
pci8: i/o space, memory space enabled
ppb8 at pci0 dev 5 function 0: Intel 5000 Series Chipset PCI Express x4 Port 5 (rev. 0x12)
ppb8: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x4 @ 2.5GT/s
pci9 at ppb8 bus 11
ppb8: added to list as bus 11
pci9: i/o space, memory space enabled
ppb9 at pci0 dev 6 function 0: Intel 5000 Series Chipset PCI Express x8 Port 6-7 (rev. 0x12)
ppb9: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x8 @ 2.5GT/s
pci10 at ppb9 bus 12
ppb9: added to list as bus 12
pci10: i/o space, memory space enabled
ppb10 at pci0 dev 7 function 0: Intel 5000 Series Chipset PCI Express x4 Port 7 (rev. 0x12)
ppb10: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x4 @ 2.5GT/s
pci11 at ppb10 bus 13
ppb10: added to list as bus 13
pci11: i/o space, memory space enabled
pchb1 at pci0 dev 16 function 0: Intel 5000 Series Chipset FSB Registers (rev. 0x12)
pchb2 at pci0 dev 16 function 1: Intel 5000 Series Chipset FSB Registers (rev. 0x12)
pchb3 at pci0 dev 16 function 2: Intel 5000 Series Chipset FSB Registers (rev. 0x12)
pchb4 at pci0 dev 17 function 0: Intel 5000 Series Chipset Reserved Registers (rev. 0x12)
pchb5 at pci0 dev 19 function 0: Intel 5000 Series Chipset Reserved Registers (rev. 0x12)
pchb6 at pci0 dev 21 function 0: Intel 5000 Series Chipset FBD Registers (rev. 0x12)
pchb7 at pci0 dev 22 function 0: Intel 5000 Series Chipset FBD Registers (rev. 0x12)
ppb11 at pci0 dev 28 function 0: Intel 63xxESB PCI Express Port #1 (rev. 0x09)
ppb11: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x4 @ 2.5GT/s
pci12 at ppb11 bus 2
ppb11: added to list as bus 2
pci12: i/o space, memory space enabled
ppb12 at pci12 dev 0 function 0: ServerWorks BCM5714/BCM5715 Integral PCI-E to PCI-X Bridge (rev. 0xc3)
ppb12: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
pci13 at ppb12 bus 3
ppb12: added to list as bus 3
pci13: i/o space, memory space enabled
bnx1 at pci13 dev 0 function 0: Broadcom NetXtreme II BCM5708 1000Base-T
bnx1: Ethernet address [_MAC_XXXXXXXXXX]
bnx1: ASIC BCM5708 B2 (0x57081020)
bnx1: PCI-X 64bit 133MHz
bnx1: B/C (3.5.12); Bufs (RX:2;TX:2); Flags (MFW); MFW (UMP 1.1.8)
bnx1: Coal (RX:6,6,18,18; TX:20,20,80,80)
brgphy1 at bnx1 phy 1: BCM5708C 1000BASE-T media interface, rev. 6
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
event_set_handler: id:ioapic0 pin 16, xname:bnx1, handler:(*0xffffffff80209230)(), evtch 5, level 6
bnx1: interrupting at ioapic0 pin 16
uhci0 at pci0 dev 29 function 0: Intel 63xxESB USB UHCI Controller (rev. 0x09)
ioapic0: int21 0x1a9c0<vector=0xc0,delmode=0x1=low,logical,actlo,level,masked,dest=0> 0xff000000<target=0xff>
event_set_handler: id:ioapic0 pin 21, xname:uhci0, handler:(*0xffffffff80209230)(), evtch 7, level 6
event_set_handler: id:ioapic0 pin 21, xname:uhci0, attaching and binding evtch 7 to current VCPU vcpu0 0
uhci0: interrupting at ioapic0 pin 21
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: Intel 63xxESB USB UHCI Controller (rev. 0x09)
ioapic0: int20 0x1a9b8<vector=0xb8,delmode=0x1=low,logical,actlo,level,masked,dest=0> 0xff000000<target=0xff>
event_set_handler: id:ioapic0 pin 20, xname:uhci1, handler:(*0xffffffff80209230)(), evtch 8, level 6
event_set_handler: id:ioapic0 pin 20, xname:uhci1, attaching and binding evtch 8 to current VCPU vcpu0 0
uhci1: interrupting at ioapic0 pin 20
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: Intel 63xxESB USB UHCI Controller (rev. 0x09)
event_set_handler: id:ioapic0 pin 21, xname:uhci2, handler:(*0xffffffff80209230)(), evtch 7, level 6
uhci2: interrupting at ioapic0 pin 21
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: Intel 63xxESB USB UHCI Controller (rev. 0x09)
event_set_handler: id:ioapic0 pin 20, xname:uhci3, handler:(*0xffffffff80209230)(), evtch 8, level 6
uhci3: interrupting at ioapic0 pin 20
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: Intel 63xxESB USB EHCI Controller (rev. 0x09)
event_set_handler: id:ioapic0 pin 21, xname:ehci0, handler:(*0xffffffff80209230)(), evtch 7, level 6
ehci0: interrupting at ioapic0 pin 21
ehci0: EHCI version 1.0
ehci0: 4 companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
ppb13 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0xd9)
pci14 at ppb13 bus 14
ppb13: added to list as bus 14
pci14: i/o space, memory space enabled
vga0 at pci14 dev 13 function 0: ATI Technologies ES1000 (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
ichlpcib0 at pci0 dev 31 function 0: Intel 63xxESB LPC Interface Bridge (rev. 0x09)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
piixide0 at pci0 dev 31 function 1: Intel 631xESB/632xESB IDE Controller (rev. 0x09)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
ioapic0: int14 0x988<vector=0x88,delmode=0x1=low,logical,acthi,edge,dest=0> 0x1000000<target=0x1>
event_set_handler: id:ioapic0 pin 14, xname:piixide0 primary, handler:(*0xffffffff80209230)(), evtch 9, level 6
event_set_handler: id:ioapic0 pin 14, xname:piixide0 primary, attaching and binding evtch 9 to current VCPU vcpu0 0
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
isa0 at ichlpcib0
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 1-byte FIFO
ioapic0: int3 0x930<vector=0x30,delmode=0x1=low,logical,acthi,edge,dest=0> 0x1000000<target=0x1>
event_set_handler: id:ioapic0 pin 3, xname:com1, handler:(*0xffffffff80209230)(), evtch 10, level 8
event_set_handler: id:ioapic0 pin 3, xname:com1, attaching and binding evtch 10 to current VCPU vcpu0 0
pckbc0 at isa0 port 0x60-0x64
entropy: WARNING: extracting entropy too early
timecounter: Timecounter "xen_system_time" frequency 1000000000 Hz quality 10000
event_set_handler: id:<NULL>, xname:vcpu0 clock, handler:(*0xffffffff8020bf16)(), evtch 11, level 7
event_set_handler: id:xenev0 chan 11, xname:vcpu0 clock, attaching evtch 11 to VCPU vcpu0 0
Xen vcpu0 clock: using event channel 11
timecounter: Timecounter "clockinterrupt" frequency 1000 Hz quality 0
entropy: hardclock attached as an entropy source (collecting)
entropy: cpu0 attached as an entropy source (off)
entropy: cpu1 attached as an entropy source (off)
event_set_handler: id:<NULL>, xname:vcpu1 ipi, handler:(*0xffffffff80202891)(), evtch 12, level 8
event_set_handler: id:xenev0 chan 12, xname:vcpu1 ipi, attaching evtch 12 to VCPU vcpu1 1
event_set_handler: id:<NULL>, xname:vcpu1 clock, handler:(*0xffffffff8020bf16)(), evtch 13, level 7
event_set_handler: id:xenev0 chan 13, xname:vcpu1 clock, attaching evtch 13 to VCPU vcpu1 1
Xen vcpu1 clock: using event channel 13
event_set_handler: id:xenev0 chan 14, xname:xenbus0, handler:(*0xffffffff8020e542)(), evtch 14, level 6
event_set_handler: id:xenev0 chan 14, xname:xenbus0, attaching and binding evtch 14 to current VCPU vcpu0 0
xenbus0: using event channel 14
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
uhub0 at usb0: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
IPsec: Initialized Security Association Processing.
aes: Intel SSSE3 vpaes
chacha: x86 SSE2 ChaCha
adiantum: self-test passed
aes_ccm: self-test passed
blake2s: self-test passed
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <TSSTcorpCD-RW/DVD-ROM TSL462D, , DE07> cdrom removableentropy: cd0 attached as an entropy source (collecting without estimation)
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
sd0 at scsibus1 target 0 lun 0: <DELL, PERC 6/i, 1.11> disk fixedentropy: sd0 attached as an entropy source (collecting without estimation)
sd0: fabricating a geometry
sd0: 465 GB, 476416 cyl, 64 head, 32 sec, 512 bytes/sect x 975699968 sectors
sd0: fabricating a geometry
sd0: tagged queueing
sd1 at scsibus1 target 1 lun 0: <DELL, PERC 6/i, 1.11> disk fixedentropy: sd1 attached as an entropy source (collecting without estimation)
sd1: fabricating a geometry
sd1: 3725 GB, 3814400 cyl, 64 head, 32 sec, 512 bytes/sect x 7811891200 sectors
sd1: fabricating a geometry
sd1: GPT GUID: c2a63011-e4ce-4bf5-9fe2-03439cdb8634
dk0 at sd1: "data0", 7811889152 blocks at 1024, type: ffs
sd1: tagged queueing
uhub5 at uhub4 port 1: Dell (0x413c) product a001 (0xa001), class 9/0, rev 2.00/0.00, addr 2
uhub5: multiple transaction translators
uhub5: 2 ports with 2 removable, self powered
uhidev0 at uhub5 port 1 configuration 1 interface 0
uhidev0: Dell (0x413c) DRAC5 (0x0000), rev 1.10/0.00, addr 3, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
entropy: ukbd0 attached as an entropy source (collecting without estimation)
uhidev1 at uhub5 port 1 configuration 1 interface 1
uhidev1: Dell (0x413c) DRAC5 (0x0000), rev 1.10/0.00, addr 3, iclass 3/1
ums0 at uhidev1: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
entropy: ums0 attached as an entropy source (collecting without estimation)
uhub6 at uhub4 port 5: Cypress Semiconductor (0x04b4) USB2 Hub (0x6560), class 9/0, rev 2.00/0.0b, addr 4
uhub6: multiple transaction translators
uhub6: 4 ports with 4 removable, self powered
entropy: /dev/random attached as an entropy source (collecting without estimation)
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 26 flags 0 maxoplen 0
crypto: driver 0 registers alg 27 flags 0 maxoplen 0
crypto: driver 0 registers alg 29 flags 0 maxoplen 0
crypto: driver 0 registers alg 33 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 19 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 20 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 24 flags 0 maxoplen 0
crypto: driver 0 registers alg 25 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 21 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 28 flags 0 maxoplen 0
crypto: driver 0 registers alg 30 flags 0 maxoplen 0
crypto: driver 0 registers alg 31 flags 0 maxoplen 0
crypto: driver 0 registers alg 32 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
crypto: driver 0 registers alg 23 flags 0 maxoplen 0
crypto: driver 0 registers alg 22 flags 0 maxoplen 0
cgd: self-test aes-xts-256
cgd: self-test aes-xts-512
cgd: self-test aes-cbc-128
cgd: self-test aes-cbc-256
cgd: self-test 3des-cbc-192
cgd: self-test blowfish-cbc-448
cgd: self-test aes-cbc-128 (encblkno8)
cgd: self-tests passed
swwdog0: software watchdog initialized
iscsi: attached. major = 203
event_set_handler: id:<NULL>, xname:xenevt, handler:(*0xffffffff80214b4f)(), evtch 15, level 8
event_set_handler: id:xenev0 chan 15, xname:xenevt, attaching evtch 15 to VCPU vcpu0 0
WARNING: 1 error while detecting hardware; check system log.
boot device: sd0
root on sd0a dumps on sd0b
Your machine does not initialize mem_clusters; sparse_dumps disabled
root file system type: ffs
kern.module.path=/stand/amd64/9.99.81/modules
TOD: boot time set to: 2025/02/11 10:17:30, (wday 2) (epoch 1739269050.691952) (rtc_offset = 0)
xen_rtc_set: Setting to 1739269054.069681000 s at systime 19184396535 ns (initial: 8184320310 ns, nanouptime: 11000076225 ns) diff(gst-(nt+init)): -1.155960966 s
entropy: entering random data seed with 256 bits of entropy
entropy: ready
xen_rtc_set: Setting to 1739269064.069682000 s at systime 29184382757 ns (initial: 8184320310 ns, nanouptime: 21000062447 ns) diff(gst-(nt+init)): -1.155960964 s
entropy: ipmi0-Voltage-2 attached as an entropy source (collecting)
entropy: ipmi0-Voltage-1 attached as an entropy source (collecting)
entropy: ipmi0-Intrusion attached as an entropy source (collecting without estimation)
entropy: ipmi0-Status1 attached as an entropy source (collecting without estimation)
entropy: ipmi0-Status attached as an entropy source (collecting without estimation)
entropy: ipmi0-FAN-6-RPM attached as an entropy source (collecting)
entropy: ipmi0-FAN-5-RPM attached as an entropy source (collecting)
entropy: ipmi0-FAN-4-RPM attached as an entropy source (collecting)
entropy: ipmi0-FAN-3-RPM attached as an entropy source (collecting)
entropy: ipmi0-FAN-2-RPM attached as an entropy source (collecting)
entropy: ipmi0-FAN-1-RPM attached as an entropy source (collecting)
entropy: ipmi0-Ambient-T attached as an entropy source (collecting)
entropy: ipmi0-Temp3 attached as an entropy source (collecting)
entropy: ipmi0-Temp2 attached as an entropy source (collecting)
entropy: ipmi0-Temp1 attached as an entropy source (collecting)
entropy: ipmi0-Temp attached as an entropy source (collecting)
ipmi0: version 2.0 interface KCS iobase 0xca8/0x8 spacing 4
ipmi0: ID 32.0 IPMI 2.0 Available +SDRs
ipmi0: Additional Chassis Bridge IPMBRcv FRU SEL SDR Sensor
ipmi0: Manufacturer 002a2 Product 01a2
ipmi0: Firmware 1.77
xen_rtc_set: Setting to 1739269074.069682000 s at systime 39184381368 ns (initial: 8184320310 ns, nanouptime: 31000061058 ns) diff(gst-(nt+init)): -1.155960964 s
mfi0: critical limit on 'mfi0 BBU'
mfi1: normal state on 'mfi1:0' (online)
mfi1: normal state on 'mfi1:1' (online)
wsdisplay0: screen 0 added (80x25, vt100 emulation)
wsdisplay0: screen 1 added (80x50, vt100 emulation)
wsdisplay0: screen 2 added (80x50, vt100 emulation)
wsdisplay0: screen 3 added (80x50, vt100 emulation)
wsdisplay0: screen 4 added (80x50, vt100 emulation)
wsdisplay0: screen 5 added (80x50, vt100 emulation)
wsdisplay0: screen 6 added (80x25, vt100 emulation)
wsdisplay0: screen 7 added (80x25, vt100 emulation)
syslogd: pid 433 [euid 0, ruid 0, svuid: 0] called seteuid(0) as superuser, DIAGNOSTIC set, doing seteuid(0)
xen_rtc_set: Setting to 1739269084.069681000 s at systime 49184381808 ns (initial: 8184320310 ns, nanouptime: 41000061498 ns) diff(gst-(nt+init)): -1.155960963 s
Time stepped from 1739269092.092394496 to 1739481993.949191000
xen_rtc_set: Setting to 1739481993.949191000 s at systime 57207108588 ns (initial: 8184320310 ns, nanouptime: 49022788278 ns) diff(gst-(nt+init)): -1.155960962 s