Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-10-19 07:03:14
From: woods
Description: NetBSD/amd64 on Dell Inc. PowerEdge R510
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
2018, 2019, 2020, 2021 The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 9.99.81 (XEN3_DOM0) #1: Fri Dec 29 12:54:06 PST 2023
woods@b2:/build/woods/b2/current-amd64-amd64-obj/work/woods/m-NetBSD-current/sys/arch/amd64/compile/XEN3_DOM0
total memory = 4096 MB
avail memory = 3939 MB
entropy: seed attached as an entropy source (collecting)
entropy: autoconf attached as an entropy source (collecting without estimation)
timecounter: Timecounters tick every 10.000 msec
entropy: system-power attached as an entropy source (collecting)
Kernelized RAIDframe activated
Dell Inc. PowerEdge R510
mainbus0 (root)
ACPI: RSDP 0x00000000000F1530 000024 (v02 DELL )
ACPI: XSDT 0x00000000000F1634 000094 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: FACP 0x00000000CF3B3F9C 0000F4 (v03 DELL PE_SC3 00000001 DELL 00000001)
ACPI: DSDT 0x00000000CF38F000 003B44 (v01 DELL PE_SC3 00000001 INTL 20050624)
ACPI: FACS 0x00000000CF3B6000 000040
ACPI: APIC 0x00000000CF3B3478 00015E (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SPCR 0x00000000CF3B35D8 000050 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HPET 0x00000000CF3B362C 000038 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: RMAD 0x00000000CF3B3668 0001D0 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: MCFG 0x00000000CF3B38C4 00003C (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: WD__ 0x00000000CF3B3904 000134 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SLIC 0x00000000CF3B3A3C 000024 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: ERST 0x00000000CF392CE4 000270 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: HEST 0x00000000CF392F54 0003A8 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: BERT 0x00000000CF392B44 000030 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: EINJ 0x00000000CF392B74 000170 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: SRAT 0x00000000CF3B3BC0 000370 (v01 DELL PE_SC3 00000001 DELL 00000001)
ACPI: TCPA 0x00000000CF3B3F34 000064 (v02 DELL PE_SC3 00000001 DELL 00000001)
ACPI: 1 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 0: pa 0xfec00000, virtual wire mode, version 0x20, 24 pins
ioapic1 at mainbus0 apid 1: pa 0xfec80000, virtual wire mode, version 0x20, 24 pins
ioapic1: autoconfiguration error: can't remap to apid 1
cpu0 at mainbus0 apid 32
cpu1 at mainbus0 apid 0
cpu2 at mainbus0 apid 34
cpu3 at mainbus0 apid 2
cpu4 at mainbus0 apid 36
cpu5 at mainbus0 apid 4
cpu6 at mainbus0 apid 48
cpu7 at mainbus0 apid 16
cpu8 at mainbus0 apid 50
cpu9 at mainbus0 apid 18
cpu10 at mainbus0 apid 52
cpu11 at mainbus0 apid 20
cpu12 at mainbus0 apid 33
cpu13 at mainbus0 apid 1
cpu14 at mainbus0 apid 35
cpu15 at mainbus0 apid 3
cpu16 at mainbus0 apid 37
cpu17 at mainbus0 apid 5
cpu18 at mainbus0 apid 49
cpu19 at mainbus0 apid 17
cpu20 at mainbus0 apid 51
cpu21 at mainbus0 apid 19
cpu22 at mainbus0 apid 53
cpu23 at mainbus0 apid 21
ipmi0 at mainbus0
hypervisor0 at mainbus0: Xen version 4.18.0_20231116nb0
hypervisor0: Xen Domain-0 name not set on command line
hypervisor0: features: mmu_pt_update_preserve_ad highmem_assist gnttab_map_avail_bits
VIRQ_DEBUG interrupt using event channel 1
vcpu0 at hypervisor0
event_set_handler: id:<NULL>, xname:vcpu0 ipi, handler:(*0xffffffff80202891)(), evtch 2, level 8
event_set_handler: id:xenev0 chan 2, xname:vcpu0 ipi, attaching evtch 2 to VCPU vcpu0 0
vcpu0: Intel(R) Xeon(R) CPU E5645 @ 2.40GHz, id 0x206c2
vcpu0: node 0, package 0, core 0, smt 0
vcpu0: idle lwp at 0xffffc38007bae040, idle sp at 0xffffc380d277fed0
vcpu1 at hypervisor0
vcpu1: Intel(R) Xeon(R) CPU E5645 @ 2.40GHz, id 0x206c2
vcpu1: node 0, package 0, core 0, smt 0
vcpu1: idle lwp at 0xffffc38008520180, idle sp at 0xffffc380d28bced0
xenbus0 at hypervisor0: Xen Virtual Bus Interface
xencons0 at hypervisor0: Xen Virtual Console Driver
xencons0: console major 143, unit 0
event_set_handler: id:xenev0 chan 3, xname:xencons0, handler:(*0xffffffff8021213a)(), evtch 3, level 6
event_set_handler: id:xenev0 chan 3, xname:xencons0, attaching and binding evtch 3 to current VCPU vcpu0 0
xencons0: using event channel 3
acpi0 at hypervisor0: Intel ACPICA 20201113
acpi0: X/RSDT: OemId <DELL ,PE_SC3 ,00000001>, AslId <DELL,00000001>
ioapic0: int9 0x18060<vector=0x60,delmode=0=fixed,physical,acthi,level,masked,dest=0> 0x20000000<target=0x20>
event_set_handler: id:ioapic0 pin 9, xname:acpi SCI, handler:(*0xffffffff802092f0)(), evtch 4, level 6
event_set_handler: id:ioapic0 pin 9, xname:acpi SCI, attaching and binding evtch 4 to current VCPU vcpu0 0
mpacpi: found root PCI bus 0
mpacpi: found subordinate bus 1
mpacpi: found subordinate bus 2
mpacpi: found subordinate bus 3
mpacpi: found subordinate bus 4
mpacpi: found subordinate bus 5
mpacpi: found subordinate bus 6
mpacpi: 7 PCI busses
mpacpi: ISA interrupt override 0 -> 2 (0/0)
mpacpi: ISA interrupt override 9 -> 9 (1/3)
mpacpi: configuring PCI bus 0 int routing
mpacpi: configuring PCI bus 1 int routing
mpacpi: configuring PCI bus 2 int routing
mpacpi: configuring PCI bus 3 int routing
mpacpi: configuring PCI bus 4 int routing
mpacpi: configuring PCI bus 5 int routing
mpacpi: configuring PCI bus 6 int routing
ioapic0: pin 2 attached to isa0 irq 0 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 1 attached to isa0 irq 1 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 3 attached to isa0 irq 3 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 4 attached to isa0 irq 4 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 5 attached to isa0 irq 5 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 6 attached to isa0 irq 6 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 7 attached to isa0 irq 7 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 8 attached to isa0 irq 8 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 9 attached to isa0 irq 9 (type 0<type=0> flags 0xd<pol=0x1=Act Hi,trig=0x3=Level>)
ioapic0: pin 10 attached to isa0 irq 10 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 11 attached to isa0 irq 11 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 12 attached to isa0 irq 12 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 13 attached to isa0 irq 13 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 14 attached to isa0 irq 14 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 15 attached to isa0 irq 15 (type 0<type=0> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 0x1<type=0x1=NMI> flags 0<pol=0,trig=0>)
ioapic1: pin 21 attached to pci0 device 0 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 21 attached to pci0 device 1 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 21 attached to pci0 device 2 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 21 attached to pci0 device 3 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 21 attached to pci0 device 4 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 21 attached to pci0 device 5 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 21 attached to pci0 device 6 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 21 attached to pci0 device 7 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 21 attached to pci0 device 8 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 21 attached to pci0 device 9 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 21 attached to pci0 device 10 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 21 attached to pci0 device 13 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 19 attached to pci0 device 22 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 20 attached to pci0 device 22 INT_B (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 21 attached to pci0 device 22 INT_C (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 22 attached to pci0 device 22 INT_D (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 17 attached to pci0 device 26 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 18 attached to pci0 device 26 INT_B (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 19 attached to pci0 device 26 INT_C (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci0 device 28 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 17 attached to pci0 device 28 INT_B (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 18 attached to pci0 device 28 INT_C (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 19 attached to pci0 device 28 INT_D (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 21 attached to pci0 device 29 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 20 attached to pci0 device 29 INT_B (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 21 attached to pci0 device 29 INT_C (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 20 attached to pci0 device 29 INT_D (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 16 attached to pci0 device 31 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 17 attached to pci0 device 31 INT_B (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 23 attached to pci0 device 31 INT_C (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 22 attached to pci0 device 31 INT_D (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 4 attached to pci1 device 0 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 16 attached to pci1 device 0 INT_B (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 17 attached to pci1 device 0 INT_C (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 23 attached to pci1 device 0 INT_D (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 0 attached to pci2 device 0 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 10 attached to pci2 device 0 INT_B (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 11 attached to pci2 device 0 INT_C (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 12 attached to pci2 device 0 INT_D (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 6 attached to pci3 device 0 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 13 attached to pci3 device 0 INT_B (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 15 attached to pci3 device 0 INT_C (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 14 attached to pci3 device 0 INT_D (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 8 attached to pci4 device 0 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 18 attached to pci4 device 0 INT_B (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 23 attached to pci4 device 0 INT_C (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 17 attached to pci4 device 0 INT_D (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 9 attached to pci5 device 0 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 7 attached to pci5 device 0 INT_B (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 22 attached to pci5 device 0 INT_C (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic1: pin 21 attached to pci5 device 0 INT_D (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
ioapic0: pin 19 attached to pci6 device 3 INT_A (type 0<type=0> flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
WHEA (PNP0C33) at acpi0 not configured
PMI0 (ACPI000D) at acpi0 not configured
SPK (PNP0C01) at acpi0 not configured
TMR (PNP0100) at acpi0 not configured
COMA (PNP0501) at acpi0 not configured
COMB (PNP0501) at acpi0 not configured
MBIO (PNP0C01) at acpi0 not configured
ipmi_acpi0 at acpi0 (NIPM, IPI0001-5): io 0xca8,0xcac
HPET (PNP0103) at acpi0 not configured
SRIO (PNP0C14) at acpi0 not configured
ACPI: Enabled 1 GPEs in block 00 to 3F
pci0 at hypervisor0 bus 0: configuration mode 1
hypervisor0: added to list as bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0: Intel 5500/X58 DMI port (rev. 0x13)
ppb0 at pci0 dev 1 function 0: Intel 5520/5500/X58 PCIe Root Port 1 (rev. 0x13)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
ppb0: link is x4 @ 2.5GT/s
pci1 at ppb0 bus 1
ppb0: added to list as bus 1
pci1: i/o space, memory space enabled
bnx0 at pci1 dev 0 function 0: Broadcom NetXtreme II BCM5716 1000Base-T
bnx0: Ethernet address [_MAC_XXXXXXXXXX]
bnx0: ASIC BCM5709 C0 (0x57092008)
bnx0: PCIe x4 2.5GT/s
bnx0: B/C (5.2.3); Bufs (RX:2;TX:2); Flags (MFW); MFW (NCSI 2.0.11)
bnx0: Coal (RX:6,6,18,18; TX:20,20,80,80)
brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ioapic1: int4 0x1a041<vector=0x41,delmode=0=fixed,physical,actlo,level,masked,dest=0> 0x20000000<target=0x20>
event_set_handler: id:ioapic1 pin 4, xname:bnx0, handler:(*0xffffffff802092f0)(), evtch 5, level 6
event_set_handler: id:ioapic1 pin 4, xname:bnx0, attaching and binding evtch 5 to current VCPU vcpu0 0
bnx0: interrupting at ioapic1 pin 4
bnx1 at pci1 dev 0 function 1: Broadcom NetXtreme II BCM5716 1000Base-T
bnx1: Ethernet address [_MAC_XXXXXXXXXX]
bnx1: ASIC BCM5709 C0 (0x57092008)
bnx1: PCIe x4 2.5GT/s
bnx1: B/C (5.2.3); Bufs (RX:2;TX:2); Flags (MFW); MFW (NCSI 2.0.11)
bnx1: Coal (RX:6,6,18,18; TX:20,20,80,80)
brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ioapic1: int16 0x1a0a1<vector=0xa1,delmode=0=fixed,physical,actlo,level,masked,dest=0> 0x20000000<target=0x20>
event_set_handler: id:ioapic1 pin 16, xname:bnx1, handler:(*0xffffffff802092f0)(), evtch 6, level 6
event_set_handler: id:ioapic1 pin 16, xname:bnx1, attaching and binding evtch 6 to current VCPU vcpu0 0
bnx1: interrupting at ioapic1 pin 16
ppb1 at pci0 dev 3 function 0: Intel 5520/5500/X58 PCIe Root Port 3 (rev. 0x13)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
pci2 at ppb1 bus 2
ppb1: added to list as bus 2
pci2: i/o space, memory space enabled
mfi0 at pci2 dev 0 function 0ioapic1: int0 0x1a0e0<vector=0xe0,delmode=0=fixed,physical,actlo,level,masked,dest=0> 0x20000000<target=0x20>
event_set_handler: id:ioapic1 pin 0, xname:mfi0, handler:(*0xffffffff802092f0)(), evtch 7, level 6
event_set_handler: id:ioapic1 pin 0, xname:mfi0, attaching and binding evtch 7 to current VCPU vcpu0 0
: Dell PERC H700 Integrated
mfi0: interrupting at ioapic1 pin 0
mfi0: PERC H700 Integrated version 12.10.7-0001
mfi0: logical drives 2, 1024MB RAM, BBU type BBU, status good
scsibus0 at mfi0: 64 targets, 8 luns per target
ppb2 at pci0 dev 7 function 0: Intel 5520/5500/X58 PCIe Root Port 7 (rev. 0x13)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x8 @ 5.0GT/s
pci3 at ppb2 bus 3
ppb2: added to list as bus 3
pci3: i/o space, memory space enabled
ppb3 at pci0 dev 9 function 0: Intel 5520/5500/X58 PCIe Root Port 9 (rev. 0x13)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
pci4 at ppb3 bus 4
ppb3: added to list as bus 4
pci4: i/o space, memory space enabled
ppb4 at pci0 dev 10 function 0: Intel 5520/5500/X58 PCIe Root Port 10 (rev. 0x13)
ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
pci5 at ppb4 bus 5
ppb4: added to list as bus 5
pci5: i/o space, memory space enabled
Intel 5520/5500/X58 Misc (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 0 not configured
Intel 5520/5500/X58 Scratchpads and GPIO (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 1 not configured
Intel 5520/5500/X58 Control Status and RAS (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 2 not configured
uhci0 at pci0 dev 26 function 0: Intel 82801JI USB UHCI Controller (rev. 0x00)
ioapic0: int17 0x1a0a8<vector=0xa8,delmode=0=fixed,physical,actlo,level,masked,dest=0> 0x20000000<target=0x20>
event_set_handler: id:ioapic0 pin 17, xname:uhci0, handler:(*0xffffffff802092f0)(), evtch 8, level 6
event_set_handler: id:ioapic0 pin 17, xname:uhci0, attaching and binding evtch 8 to current VCPU vcpu0 0
uhci0: interrupting at ioapic0 pin 17
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: Intel 82801JI USB UHCI Controller (rev. 0x00)
ioapic0: int18 0x1a0b0<vector=0xb0,delmode=0=fixed,physical,actlo,level,masked,dest=0> 0x20000000<target=0x20>
event_set_handler: id:ioapic0 pin 18, xname:uhci1, handler:(*0xffffffff802092f0)(), evtch 9, level 6
event_set_handler: id:ioapic0 pin 18, xname:uhci1, attaching and binding evtch 9 to current VCPU vcpu0 0
uhci1: interrupting at ioapic0 pin 18
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 26 function 7: Intel 82801JI USB EHCI Controller (rev. 0x00)
ioapic0: int19 0x1a0b8<vector=0xb8,delmode=0=fixed,physical,actlo,level,masked,dest=0> 0x20000000<target=0x20>
event_set_handler: id:ioapic0 pin 19, xname:ehci0, handler:(*0xffffffff802092f0)(), evtch 10, level 6
event_set_handler: id:ioapic0 pin 19, xname:ehci0, attaching and binding evtch 10 to current VCPU vcpu0 0
ehci0: interrupting at ioapic0 pin 19
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: 2 companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
uhci2 at pci0 dev 29 function 0: Intel 82801JI USB UHCI Controller (rev. 0x00)
ioapic0: int21 0x1a0c8<vector=0xc8,delmode=0=fixed,physical,actlo,level,masked,dest=0> 0x20000000<target=0x20>
event_set_handler: id:ioapic0 pin 21, xname:uhci2, handler:(*0xffffffff802092f0)(), evtch 11, level 6
event_set_handler: id:ioapic0 pin 21, xname:uhci2, attaching and binding evtch 11 to current VCPU vcpu0 0
uhci2: interrupting at ioapic0 pin 21
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 1: Intel 82801JI USB UHCI Controller (rev. 0x00)
ioapic0: int20 0x1a0c0<vector=0xc0,delmode=0=fixed,physical,actlo,level,masked,dest=0> 0x20000000<target=0x20>
event_set_handler: id:ioapic0 pin 20, xname:uhci3, handler:(*0xffffffff802092f0)(), evtch 12, level 6
event_set_handler: id:ioapic0 pin 20, xname:uhci3, attaching and binding evtch 12 to current VCPU vcpu0 0
uhci3: interrupting at ioapic0 pin 20
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 2: Intel 82801JI USB UHCI Controller (rev. 0x00)
event_set_handler: id:ioapic0 pin 21, xname:uhci4, handler:(*0xffffffff802092f0)(), evtch 11, level 6
uhci4: interrupting at ioapic0 pin 21
usb5 at uhci4: USB revision 1.0
uhci5 at pci0 dev 29 function 3: Intel 82801JI USB UHCI Controller (rev. 0x00)
event_set_handler: id:ioapic0 pin 20, xname:uhci5, handler:(*0xffffffff802092f0)(), evtch 12, level 6
uhci5: interrupting at ioapic0 pin 20
usb6 at uhci5: USB revision 1.0
ehci1 at pci0 dev 29 function 7: Intel 82801JI USB EHCI Controller (rev. 0x00)
event_set_handler: id:ioapic0 pin 21, xname:ehci1, handler:(*0xffffffff802092f0)(), evtch 11, level 6
ehci1: interrupting at ioapic0 pin 21
ehci1: EHCI version 1.0
ehci1: 2 companion controllers, 2 ports each: uhci2 uhci3
usb7 at ehci1: USB revision 2.0
ppb5 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0x90)
pci6 at ppb5 bus 6
ppb5: added to list as bus 6
pci6: i/o space, memory space enabled
vga0 at pci6 dev 3 function 0: Matrox MGA G200eW (rev. 0x0a)
wsdisplay0 at vga0 kbdmux 1
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
ichlpcib0 at pci0 dev 31 function 0: Intel 82801JIR LPC Interface Bridge (rev. 0x00)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
isa0 at ichlpcib0
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 1-byte FIFO
ioapic0: int3 0x38<vector=0x38,delmode=0=fixed,physical,acthi,edge,dest=0> 0x20000000<target=0x20>
event_set_handler: id:ioapic0 pin 3, xname:com1, handler:(*0xffffffff802092f0)(), evtch 13, level 8
event_set_handler: id:ioapic0 pin 3, xname:com1, attaching and binding evtch 13 to current VCPU vcpu0 0
pckbc0 at isa0 port 0x60-0x64
entropy: WARNING: extracting entropy too early
timecounter: Timecounter "xen_system_time" frequency 1000000000 Hz quality 10000
event_set_handler: id:<NULL>, xname:vcpu0 clock, handler:(*0xffffffff8020bef4)(), evtch 14, level 7
event_set_handler: id:xenev0 chan 14, xname:vcpu0 clock, attaching evtch 14 to VCPU vcpu0 0
Xen vcpu0 clock: using event channel 14
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
entropy: hardclock attached as an entropy source (collecting)
entropy: cpu0 attached as an entropy source (off)
entropy: cpu1 attached as an entropy source (off)
event_set_handler: id:<NULL>, xname:vcpu1 ipi, handler:(*0xffffffff80202891)(), evtch 15, level 8
event_set_handler: id:xenev0 chan 15, xname:vcpu1 ipi, attaching evtch 15 to VCPU vcpu1 1
event_set_handler: id:<NULL>, xname:vcpu1 clock, handler:(*0xffffffff8020bef4)(), evtch 16, level 7
event_set_handler: id:xenev0 chan 16, xname:vcpu1 clock, attaching evtch 16 to VCPU vcpu1 1
Xen vcpu1 clock: using event channel 16
event_set_handler: id:xenev0 chan 17, xname:xenbus0, handler:(*0xffffffff8020e572)(), evtch 17, level 6
event_set_handler: id:xenev0 chan 17, xname:xenbus0, attaching and binding evtch 17 to current VCPU vcpu0 0
xenbus0: using event channel 17
scsibus0: waiting 2 seconds for devices to settle...
IPsec: Initialized Security Association Processing.
aes: Intel AES-NI
chacha: x86 SSE2 ChaCha
adiantum: self-test passed
aes_ccm: self-test passed
blake2s: self-test passed
uhub0 at usb0: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
uhub3 at usb3: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub6: 2 ports with 2 removable, self powered
uhub7 at usb7: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub7: 4 ports with 4 removable, self powered
sd0 at scsibus0 target 0 lun 0: <DELL, PERC H700, 2.10> disk fixedentropy: sd0 attached as an entropy source (collecting without estimation)
sd0: fabricating a geometry
sd0: 7451 GB, 7629824 cyl, 64 head, 32 sec, 512 bytes/sect x 15625879552 sectors
sd0: fabricating a geometry
sd0: GPT GUID: 14cff509-559f-4c49-a1a4-f373c211a09f
dk0 at sd0: "3f3203ed-2a83-41cd-97e6-b49d7b48615b", 40960000 blocks at 34, type: ffs
dk1 at sd0: "d0273ca7-4340-4451-8643-f198fd21eb15", 10240000 blocks at 40960034, type: swap
dk2 at sd0: "hugedisk0", 15564437504 blocks at 61441024, type: ffs
dk3 at sd0: "311baf10-48d7-45fb-b43c-2a06ad2a52a5", 10240000 blocks at 51200034, type: ffs
sd0: tagged queueing
sd1 at scsibus0 target 1 lun 0: <DELL, PERC H700, 2.10> disk fixedentropy: sd1 attached as an entropy source (collecting without estimation)
sd1: fabricating a geometry
sd1: 11177 GB, 11445248 cyl, 64 head, 32 sec, 512 bytes/sect x 23439867904 sectors
sd1: fabricating a geometry
sd1: GPT GUID: d15a5459-b911-46bb-a4ad-36567b5d98c0
dk4 at sd1: "hugedisk1", 23439865856 blocks at 1024, type: ffs
sd1: tagged queueing
uhub8 at uhub2 port 3: SMSC (0x0424) USB 2.0 4-Port Hub (0x2514), class 9/0, rev 2.00/0.00, addr 2
uhub8: multiple transaction translators
uhub8: 4 ports with 4 removable, self powered
umass0 at uhub7 port 1 configuration 1 interface 0
umass0: SanDisk (0x0781) Ultra USB 3.0 (0x5591), rev 2.10/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, 1 lun per target
sd2 at scsibus1 target 0 lun 0: <SanDisk, Ultra USB 3.0, 1.00> disk removableentropy: sd2 attached as an entropy source (collecting without estimation)
sd2: 29328 MB, 59587 cyl, 16 head, 63 sec, 512 bytes/sect x 60063744 sectors
sd2: GPT GUID: 3ecec02f-e32f-45f7-8efb-4eccf8a2174c
dk5 at sd2: "EFI system", 262144 blocks at 2048, type: msdos
dk6 at sd2: "88433fbf-13a9-4373-8940-4ef32debd8f1", 2908160 blocks at 264192, type: ffs
ehci1: handing over full speed device on port 2 to uhci2
entropy: /dev/random attached as an entropy source (collecting without estimation)
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 26 flags 0 maxoplen 0
crypto: driver 0 registers alg 27 flags 0 maxoplen 0
crypto: driver 0 registers alg 29 flags 0 maxoplen 0
crypto: driver 0 registers alg 33 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 19 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 20 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 24 flags 0 maxoplen 0
crypto: driver 0 registers alg 25 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 21 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 28 flags 0 maxoplen 0
crypto: driver 0 registers alg 30 flags 0 maxoplen 0
crypto: driver 0 registers alg 31 flags 0 maxoplen 0
crypto: driver 0 registers alg 32 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
crypto: driver 0 registers alg 23 flags 0 maxoplen 0
crypto: driver 0 registers alg 22 flags 0 maxoplen 0
cgd: self-test aes-xts-256
cgd: self-test aes-xts-512
cgd: self-test aes-cbc-128
cgd: self-test aes-cbc-256
cgd: self-test 3des-cbc-192
cgd: self-test blowfish-cbc-448
cgd: self-test aes-cbc-128 (encblkno8)
cgd: self-tests passed
swwdog0: software watchdog initialized
iscsi: attached. major = 203
event_set_handler: id:<NULL>, xname:xenevt, handler:(*0xffffffff80214b7f)(), evtch 18, level 8
event_set_handler: id:xenev0 chan 18, xname:xenevt, attaching evtch 18 to VCPU vcpu0 0
WARNING: 1 error while detecting hardware; check system log.
boot device: dk0
root on dk0 dumps on dk1
Your machine does not initialize mem_clusters; sparse_dumps disabled
/: replaying log to memory
root file system type: ffs
kern.module.path=/stand/amd64/9.99.81/modules
/: replaying log to disk
uhidev0 at uhub3 port 2 configuration 1 interface 0
uhidev0: Avocent (0x0624) USB Composite Device-0 (0x0248), rev 1.10/0.00, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
entropy: ukbd0 attached as an entropy source (collecting without estimation)
uhidev1 at uhub3 port 2 configuration 1 interface 1
uhidev1: Avocent (0x0624) USB Composite Device-0 (0x0248), rev 1.10/0.00, addr 2, iclass 3/1
ums0 at uhidev1: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
entropy: ums0 attached as an entropy source (collecting without estimation)
/var: replaying log to disk
entropy: entering random data seed with 256 bits of entropy
entropy: ready
wsdisplay0: screen 0 added (80x25, vt100 emulation)
wsdisplay0: screen 1 added (80x50, vt100 emulation)
wsdisplay0: screen 2 added (80x50, vt100 emulation)
wsdisplay0: screen 3 added (80x50, vt100 emulation)
wsdisplay0: screen 4 added (80x50, vt100 emulation)
wsdisplay0: screen 5 added (80x50, vt100 emulation)
wsdisplay0: screen 6 added (80x25, vt100 emulation)
wsdisplay0: screen 7 added (80x25, vt100 emulation)
syslogd: pid 611 [euid 0, ruid 0, svuid: 0] called seteuid(0) as superuser, DIAGNOSTIC set, doing seteuid(0)
mfi0: normal state on 'mfi0:0' (online)
mfi0: normal state on 'mfi0:1' (online)
entropy: ipmi0-Ambient-T attached as an entropy source (collecting)
entropy: ipmi0-Ambient-T attached as an entropy source (collecting)
entropy: ipmi0-FAN-MOD-5 attached as an entropy source (collecting)
entropy: ipmi0-FAN-MOD-5 attached as an entropy source (collecting)
entropy: ipmi0-FAN-MOD-4 attached as an entropy source (collecting)
entropy: ipmi0-Temp6 attached as an entropy source (collecting)
entropy: ipmi0-Temp5 attached as an entropy source (collecting)
entropy: ipmi0-Temp4 attached as an entropy source (collecting)
entropy: ipmi0-Intrusion attached as an entropy source (collecting without estimation)
entropy: ipmi0-Status1 attached as an entropy source (collecting without estimation)
entropy: ipmi0-Voltage1 attached as an entropy source (collecting)
entropy: ipmi0-Voltage attached as an entropy source (collecting)
entropy: ipmi0-Status attached as an entropy source (collecting without estimation)
entropy: ipmi0-FAN-MOD-4 attached as an entropy source (collecting)
entropy: ipmi0-FAN-MOD-3 attached as an entropy source (collecting)
entropy: ipmi0-FAN-MOD-3 attached as an entropy source (collecting)
entropy: ipmi0-FAN-MOD-2 attached as an entropy source (collecting)
entropy: ipmi0-FAN-MOD-2 attached as an entropy source (collecting)
entropy: ipmi0-FAN-MOD-1 attached as an entropy source (collecting)
entropy: ipmi0-FAN-MOD-1 attached as an entropy source (collecting)
entropy: ipmi0-Planar-Te attached as an entropy source (collecting)
entropy: ipmi0-Ambient-T attached as an entropy source (collecting)
entropy: ipmi0-Temp3 attached as an entropy source (collecting)
entropy: ipmi0-Temp2 attached as an entropy source (collecting)
entropy: ipmi0-Temp1 attached as an entropy source (collecting)
entropy: ipmi0-Temp attached as an entropy source (collecting)
ipmi0: version 2.0 interface KCS iobase 0xca8/0x8 spacing 4
ipmi0: ID 32.0 IPMI 2.0 Available +SDRs
ipmi0: Additional Chassis Bridge IPMBRcv FRU SEL SDR Sensor
ipmi0: Manufacturer 002a2 Product 01a2
ipmi0: Firmware 2.90
/images: replaying log to disk