Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-10-30 19:00:58
From: johans
Description: FreeBSD/amd64 on YZ 1170-12-2C-V11C
---<<BOOT>>--- Copyright (c) 1992-2023 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.3-RELEASE releng/14.3-n271432-8c9ce319fef7 GENERIC amd64 FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) VT(vga): resolution 640x480 CPU: Intel(R) Celeron(R) CPU N2840 @ 2.16GHz (2166.76-MHz K8-class CPU) Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x101<LAHF,Prefetch> Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> Structured Extended Features3=0xc000000<IBPB,STIBP> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 3992686592 (3807 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I > WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled. Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20221020/tbfadt-748) ioapic0 <Version 2.0> irqs 0-86 Launching APs: 1 random: entropy device external interface kbd1 at kbdmux0 vtvga0: <VT VGA driver> smbios0: <System Management BIOS> at iomem 0xf05b0-0xf05ce smbios0: Entry point: v2.1 (32-bit), Version: 3.0, BCD Revision: 3.0 aesni0: No AES or SHA support. acpi0: <ALASKA A M I > acpi0: Power Button (fixed) unknown: I/O range not supported cpu0: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0815000-0xd08157ff irq 19 at device 19.0 on pci0 ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 xhci0: <Intel BayTrail USB 3.0 controller> mem 0xd0800000-0xd080ffff irq 20 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <encrypt/decrypt> at device 26.0 (no driver attached) hdac0: <Intel BayTrail HDA Controller> mem 0xd0810000-0xd0813fff irq 22 at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xd0704000-0xd0704fff,0xd0700000-0xd0703fff irq 16 at device 0.0 on pci1 re0: Using 1 MSI-X message re0: turning off MSI enable bit. re0: Chip rev. 0x54000000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 pci2: <ACPI PCI bus> on pcib2 re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xd0604000-0xd0604fff,0xd0600000-0xd0603fff irq 17 at device 0.0 on pci2 re1: Using 1 MSI-X message re1: turning off MSI enable bit. re1: Chip rev. 0x54000000 re1: MAC rev. 0x00100000 miibus1: <MII bus> on re1 rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re1: Using defaults for TSO: 65518/35/2048 re1: Ethernet address: [_MAC_XXXXXXXXXX] re1: netmap queues/slots: TX 1/256, RX 1/256 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci4: <ACPI PCI bus> on pcib4 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] driver bug: Unable to set devclass (class: atkbdc devname: (unknown)) ns8250: UART FCR is broken ns8250: UART FCR is broken uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ns8250: UART FCR is broken ns8250: UART FCR is broken uart1: <16950 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 cpufreq0: <CPU frequency control> on cpu0 cpufreq1: <CPU frequency control> on cpu1 Timecounter "TSC-low" frequency 1083333137 Hz quality 1000 Timecounters tick every 1.000 msec hdacc0: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC662 rev3 (Rear Analog)> at nid 20 and 24 on hdaa0 pcm1: <Realtek ALC662 rev3 (Analog)> at nid 21 and 25 on hdaa0 pcm2: <Realtek ALC662 rev3 (Front Analog Headphones)> at nid 27 on hdaa0 random: unblocking device. hdacc1: <Intel Valleyview2 HDA CODEC> at cad 2 on hdac0 hdaa1: <Intel Valleyview2 Audio Function Group> at nid 1 on hdacc1 pcm3: <Intel Valleyview2 (HDMI/DP 8ch)> at nid 4 on hdaa1 pcm4: <Intel Valleyview2 (HDMI/DP 8ch)> at nid 5 on hdaa1 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <BKHD-MSATA 64G X0126A0> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXX] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 61057MB (125045424 512 byte sectors) ugen0.1: <Intel XHCI root HUB> at usbus0 uhub0 on usbus0 uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]... uhub0: 7 ports with 7 removable, self powered Root mount waiting for: usbus0 usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device Kingston DataTraveler 2.00000000078 (0x0951:0x1603) usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device Kingston DataTraveler 2.00000000078 (0x0951:0x1603) Root mount waiting for: usbus0 ugen0.2: <Kingston DataTraveler 2.00000000078> at usbus0 umass0 on uhub0 umass0: <Kingston DataTraveler 2.00000000078, class 0/0, rev 2.00/2.00, addr 1> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0xc000 umass0:1:0: Attached to scbus1 da0 at umass-sim0 bus 0 scbus1 target 0 lun 0 da0: <Kingston DataTraveler 2.0 1.00> Removable Direct Access SCSI-2 device da0: [_SERIAL_NUMBER_XXXXXXX] da0: 40.000MB/s transfers da0: 953MB (1952256 512 byte sectors) da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> ugen0.3: <vendor 0x05e3 USB2.0 Hub> at usbus0 uhub1 on uhub0 uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/85.36, addr 2> on usbus0 uhub1: 4 ports with 4 removable, self powered Root mount waiting for: usbus0 ugen0.4: <vendor 0x0451 product 0x2046> at usbus0 uhub2 on uhub1 uhub2: <vendor 0x0451 product 0x2046, class 9/0, rev 1.10/1.25, addr 3> on usbus0 Root mount waiting for: usbus0 uhub2: 4 ports with 4 removable, self powered ugen0.5: <Logitech USB Optical Mouse> at usbus0 ugen0.6: <Logitech USB Keyboard> at usbus0 ukbd0 on uhub1 ukbd0: <Logitech USB Keyboard, class 0/0, rev 1.10/64.02, addr 5> on usbus0 kbd2 at ukbd0 ichsmb0: <Intel Baytrail SMBus controller> port 0xf000-0xf01f mem 0xd0814000-0xd081401f irq 18 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 re0: link state changed to DOWN re1: link state changed to DOWN lo0: link state changed to UP ums0 on uhub2 ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 4> on usbus0 ums0: 3 buttons and [XYZ] coordinates ID=0 uhid0 on uhub1 uhid0: <Logitech USB Keyboard, class 0/0, rev 1.10/64.02, addr 5> on usbus0 re0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 0 0 0 0 0 done All buffers synced. Uptime: 10m4s ---<<BOOT>>--- Copyright (c) 1992-2023 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.3-RELEASE releng/14.3-n271432-8c9ce319fef7 GENERIC amd64 FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) VT(vga): resolution 640x480 CPU: Intel(R) Celeron(R) CPU N2840 @ 2.16GHz (2166.78-MHz K8-class CPU) Origin="GenuineIntel" Id=0x30678 Family=0x6 Model=0x37 Stepping=8 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x41d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,RDRAND> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x101<LAHF,Prefetch> Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG> Structured Extended Features3=0xc000000<IBPB,STIBP> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 3984285696 (3799 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I > WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20221020/tbfadt-748) ioapic0 <Version 2.0> irqs 0-86 Launching APs: 1 random: entropy device external interface kbd1 at kbdmux0 vtvga0: <VT VGA driver> smbios0: <System Management BIOS> at iomem 0xf05b0-0xf05ce smbios0: Entry point: v2.1 (32-bit), Version: 3.0, BCD Revision: 3.0 aesni0: No AES or SHA support. acpi0: <ALASKA A M I > acpi0: Power Button (fixed) unknown: I/O range not supported cpu0: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xf080-0xf087 mem 0xd0000000-0xd03fffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device ahci0: <AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xd0815000-0xd08157ff irq 19 at device 19.0 on pci0 ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 xhci0: <Intel BayTrail USB 3.0 controller> mem 0xd0800000-0xd080ffff irq 20 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <encrypt/decrypt> at device 26.0 (no driver attached) hdac0: <Intel BayTrail HDA Controller> mem 0xd0810000-0xd0813fff irq 22 at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xd0704000-0xd0704fff,0xd0700000-0xd0703fff irq 16 at device 0.0 on pci1 re0: Using 1 MSI-X message re0: Chip rev. 0x54000000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 pci2: <ACPI PCI bus> on pcib2 re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xd0604000-0xd0604fff,0xd0600000-0xd0603fff irq 17 at device 0.0 on pci2 re1: Using 1 MSI-X message re1: Chip rev. 0x54000000 re1: MAC rev. 0x00100000 miibus1: <MII bus> on re1 rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus1 rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re1: Using defaults for TSO: 65518/35/2048 re1: Ethernet address: [_MAC_XXXXXXXXXX] re1: netmap queues/slots: TX 1/256, RX 1/256 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci4: <ACPI PCI bus> on pcib4 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] driver bug: Unable to set devclass (class: atkbdc devname: (unknown)) ns8250: UART FCR is broken ns8250: UART FCR is broken uart0: <16950 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ns8250: UART FCR is broken ns8250: UART FCR is broken uart1: <16950 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 cpufreq0: <CPU frequency control> on cpu0 cpufreq1: <CPU frequency control> on cpu1 Timecounter "TSC-low" frequency 1083333150 Hz quality 1000 Timecounters tick every 1.000 msec ugen0.1: <Intel XHCI root HUB> at usbus0 uhub0 on usbus0 uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) hdacc0: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC662 rev3 (Rear Analog)> at nid 20 and 24 on hdaa0 pcm1: <Realtek ALC662 rev3 (Analog)> at nid 21 and 25 on hdaa0 pcm2: <Realtek ALC662 rev3 (Front Analog Headphones)> at nid 27 on hdaa0 hdacc1: <Intel Valleyview2 HDA CODEC> at cad 2 on hdac0 hdaa1: <Intel Valleyview2 Audio Function Group> at nid 1 on hdacc1 pcm3: <Intel Valleyview2 (HDMI/DP 8ch)> at nid 4 on hdaa1 pcm4: <Intel Valleyview2 (HDMI/DP 8ch)> at nid 5 on hdaa1 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <BKHD-MSATA 64G X0126A0> ACS-2 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXX] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 61057MB (125045424 512 byte sectors) Trying to mount root from zfs:zroot/ROOT/default []... uhub0: 7 ports with 7 removable, self powered ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 uhub1 on uhub0 uhub1: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/85.36, addr 1> on usbus0 Root mount waiting for: usbus0 uhub1: 4 ports with 4 removable, self powered ugen0.3: <vendor 0x0451 product 0x2046> at usbus0 uhub2 on uhub1 uhub2: <vendor 0x0451 product 0x2046, class 9/0, rev 1.10/1.25, addr 2> on usbus0 Root mount waiting for: usbus0 uhub2: 4 ports with 4 removable, self powered ugen0.4: <Logitech USB Optical Mouse> at usbus0 Root mount waiting for: usbus0 ugen0.5: <Logitech USB Keyboard> at usbus0 ukbd0 on uhub1 ukbd0: <Logitech USB Keyboard, class 0/0, rev 1.10/64.02, addr 4> on usbus0 kbd2 at ukbd0 ichsmb0: <Intel Baytrail SMBus controller> port 0xf000-0xf01f mem 0xd0814000-0xd081401f irq 18 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 re0: link state changed to UP re1: link state changed to DOWN lo0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP ums0 on uhub2 ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 3> on usbus0 ums0: 3 buttons and [XYZ] coordinates ID=0 uhid0 on uhub1 uhid0: <Logitech USB Keyboard, class 0/0, rev 1.10/64.02, addr 4> on usbus0