Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-12-01 05:19:55
From: cybersec.runbsd.io
Description: bear
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
2024, 2025
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 11.0_BETA (BEAR) #0: Sun Nov 30 19:42:46 WET 2025
[_EMAIL_XXXXXXXXXXX]:/usr/obj/sys/arch/amd64/compile/BEAR
total memory = 98291 MB
avail memory = 95064 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
ACPI: RSDP 0x00000000000F1170 000024 (v02 HONHPS)
ACPI: XSDT 0x00000000000F1274 00009C (v01 HONHPS ACSHPSIM 00000001 DELL 00000001)
ACPI: FACP 0x00000000BF3B3F9C 0000F4 (v03 HONHPS ACSHPSIM 00000001 DELL 00000001)
ACPI: DSDT 0x00000000BF38F000 003D72 (v01 DELL ACSHPSIM 00000001 INTL 20050624)
ACPI: FACS 0x00000000BF3B6000 000040
ACPI: APIC 0x00000000BF3B3478 00015E (v01 HONHPS ACSHPSIM 00000001 DELL 00000001)
ACPI: SPCR 0x00000000BF3B35D8 000050 (v01 HONHPS ACSHPSIM 00000001 DELL 00000001)
ACPI: HPET 0x00000000BF3B362C 000038 (v01 HONHPS ACSHPSIM 00000001 DELL 00000001)
ACPI: DMAR 0x00000000BF3B3668 0001C0 (v01 HONHPS ACSHPSIM 00000001 DELL 00000001)
ACPI: MCFG 0x00000000BF3B38C4 00003C (v01 HONHPS ACSHPSIM 00000001 DELL 00000001)
ACPI: WD__ 0x00000000BF3B3904 000134 (v01 HONHPS ACSHPSIM 00000001 DELL 00000001)
ACPI: SLIC 0x00000000BF3B3A3C 000176 (v01 HONHPS ACSHPSIM 00000001 DELL 00000001)
ACPI: ERST 0x00000000BF392EF4 000270 (v01 HONHPS ACSHPSIM 00000001 DELL 00000001)
ACPI: HEST 0x00000000BF393164 0003A8 (v01 HONHPS ACSHPSIM 00000001 DELL 00000001)
ACPI: BERT 0x00000000BF392D74 000030 (v01 HONHPS ACSHPSIM 00000001 DELL 00000001)
ACPI: EINJ 0x00000000BF392DA4 000150 (v01 HONHPS ACSHPSIM 00000001 DELL 00000001)
ACPI: SRAT 0x00000000BF3B3BC0 000370 (v01 HONHPS ACSHPSIM 00000001 DELL 00000001)
ACPI: TCPA 0x00000000BF3B3F34 000064 (v02 HONHPS ACSHPSIM 00000001 DELL 00000001)
ACPI: SSDT 0x00000000BF3B7000 003E04 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 0x20, 24 pins
ioapic1 at mainbus0 apid 1: pa 0xfec80000, version 0x20, 24 pins
cpu0 at mainbus0 apid 32
cpu0: Use lfence to serialize rdtsc
cpu0: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2
cpu0: node 0, package 1, core 0, smt 0
cpu1 at mainbus0 apid 0
cpu1: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2
cpu1: node 2, package 0, core 0, smt 0
cpu2 at mainbus0 apid 34
cpu2: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2
cpu2: node 1, package 1, core 1, smt 0
cpu3 at mainbus0 apid 2
cpu3: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2
cpu3: node 2, package 0, core 1, smt 0
cpu4 at mainbus0 apid 50
cpu4: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2
cpu4: node 1, package 1, core 9, smt 0
cpu5 at mainbus0 apid 18
cpu5: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2
cpu5: node 2, package 0, core 9, smt 0
cpu6 at mainbus0 apid 52
cpu6: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2
cpu6: node 1, package 1, core 10, smt 0
cpu7 at mainbus0 apid 20
cpu7: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2
cpu7: node 2, package 0, core 10, smt 0
cpu8 at mainbus0 apid 33
cpu8: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2
cpu8: node 1, package 1, core 0, smt 1
cpu9 at mainbus0 apid 1
cpu9: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2
cpu9: node 2, package 0, core 0, smt 1
cpu10 at mainbus0 apid 35
cpu10: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2
cpu10: node 1, package 1, core 1, smt 1
cpu11 at mainbus0 apid 3
cpu11: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2
cpu11: node 2, package 0, core 1, smt 1
cpu12 at mainbus0 apid 51
cpu12: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2
cpu12: node 1, package 1, core 9, smt 1
cpu13 at mainbus0 apid 19
cpu13: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2
cpu13: node 2, package 0, core 9, smt 1
cpu14 at mainbus0 apid 53
cpu14: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2
cpu14: node 1, package 1, core 10, smt 1
cpu15 at mainbus0 apid 21
cpu15: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, id 0x206c2
cpu15: node 2, package 0, core 10, smt 1
acpi0 at mainbus0: Intel ACPICA 20241212
acpi0: X/RSDT: OemId <HONHPS,ACSHPSIM,00000001>, AslId <DELL,00000001>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpihed0 at acpi0 (WHEA, PNP0C33-WHEA): ACPI Hardware Error Device
PMI0 (ACPI000D) at acpi0 not configured
SPK (PNP0C01) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x5f irq 0
MBIO (PNP0C01) at acpi0 not configured
ipmi_acpi0 at acpi0 (NIPM, IPI0001-5): io 0xca8,0xcac
ipmi0 at ipmi_acpi0
apei0 at acpi0: ACPI Platform Error Interface
apei0: BERT: OemId <HONHPS,ACSHPSIM,00000001> AslId <DELL,00000001>
apei0: BERT: 0x400 bytes at 0xbf38b0b8
apei0: BERT: no boot errors recorded
apei0: EINJ: OemId <HONHPS,ACSHPSIM,00000001> AslId <DELL,00000001>
apei0: EINJ: can inject: 0x140<PCIE_CORRECTABLE,PCIE_FATAL>
apei0: ERST: OemId <HONHPS,ACSHPSIM,00000001> AslId <DELL,00000001>
apei0: ERST: 0 records in error log 8192 bytes @ 0xbf38d000 attr=0x2#
apei0: HEST: OemId <HONHPS,ACSHPSIM,00000001> AslId <DELL,00000001>
apei0: HEST: 11 hardware error sources
apei0: autoconfiguration error: HEST[0, Id=224]: unimplemented type: 0x0006
apei0: autoconfiguration error: HEST[1, Id=225]: unimplemented type: 0x0007
apei0: autoconfiguration error: HEST[2, Id=226]: unimplemented type: 0x0008
apei0: autoconfiguration error: HEST[10, Id=228]: unimplemented type: 0x0001
ACPI: Enabled 1 GPEs in block 00 to 3F
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel 5520 ESI Port (rev. 0x13)
ppb0 at pci0 dev 1 function 0: Intel 5520/5500/X58 PCIe Root Port 1 (rev. 0x13)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
ppb0: link is x4 @ 2.5GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
bnx0 at pci1 dev 0 function 0: Broadcom NetXtreme II BCM5709 1000Base-T
bnx0: Ethernet address [_MAC_XXXXXXXXXX]
bnx0: ASIC BCM5709 C0 (0x57092003)
bnx0: PCIe x4 2.5GT/s
bnx0: B/C (5.2.2); Bufs (RX:2;TX:2); Flags (MFW); MFW (NCSI 2.0.8)
bnx0: Coal (RX:6,6,18,18; TX:20,20,80,80)
brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bnx0: interrupting at ioapic1 pin 4
bnx1 at pci1 dev 0 function 1: Broadcom NetXtreme II BCM5709 1000Base-T
bnx1: Ethernet address [_MAC_XXXXXXXXXX]
bnx1: ASIC BCM5709 C0 (0x57092003)
bnx1: PCIe x4 2.5GT/s
bnx1: B/C (5.2.2); Bufs (RX:2;TX:2); Flags (MFW); MFW (NCSI 2.0.8)
bnx1: Coal (RX:6,6,18,18; TX:20,20,80,80)
brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bnx1: interrupting at ioapic1 pin 16
ppb1 at pci0 dev 3 function 0: Intel 5520/5500/X58 PCIe Root Port 3 (rev. 0x13)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
ppb1: link is x4 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
bnx2 at pci2 dev 0 function 0: Broadcom NetXtreme II BCM5709 1000Base-T
bnx2: Ethernet address [_MAC_XXXXXXXXXX]
bnx2: ASIC BCM5709 C0 (0x57092003)
bnx2: PCIe x4 2.5GT/s
bnx2: B/C (5.2.2); Bufs (RX:2;TX:2); Flags (MFW); MFW (NCSI 2.0.8)
bnx2: Coal (RX:6,6,18,18; TX:20,20,80,80)
brgphy2 at bnx2 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bnx2: interrupting at ioapic1 pin 0
bnx3 at pci2 dev 0 function 1: Broadcom NetXtreme II BCM5709 1000Base-T
bnx3: Ethernet address [_MAC_XXXXXXXXXX]
bnx3: ASIC BCM5709 C0 (0x57092003)
bnx3: PCIe x4 2.5GT/s
bnx3: B/C (5.2.2); Bufs (RX:2;TX:2); Flags (MFW); MFW (NCSI 2.0.8)
bnx3: Coal (RX:6,6,18,18; TX:20,20,80,80)
brgphy3 at bnx3 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bnx3: interrupting at ioapic1 pin 10
ppb2 at pci0 dev 4 function 0: Intel 5520/5500/X58 PCIe Root Port 4 (rev. 0x13)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
ppb2: link is x4 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
mfi0 at pci3 dev 0 function 0: Dell PERC 6/i integrated
mfi0: interrupting at ioapic1 pin 1
mfi0: PERC 6/i Integrated version[_IP_XXXX]2
mfi0: logical drives 1, 256MB RAM, BBU type BBU, status good
scsibus0 at mfi0: 64 targets, 8 luns per target
ppb3 at pci0 dev 5 function 0: Intel 5520/5500/X58 PCIe Root Port 5 (rev. 0x13)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 6 function 0: Intel 5520/5500/X58 PCIe Root Port 6 (rev. 0x13)
ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ppb5 at pci0 dev 7 function 0: Intel 5520/5500/X58 PCIe Root Port 7 (rev. 0x13)
ppb5: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x8 @ 5.0GT/s
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
ppb6 at pci0 dev 9 function 0: Intel 5520/5500/X58 PCIe Root Port 9 (rev. 0x13)
ppb6: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x8 @ 5.0GT/s
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
Intel 5520/5500/X58 Misc (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 0 not configured
Intel 5520/5500/X58 Scratchpads and GPIO (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 1 not configured
Intel 5520/5500/X58 Control Status and RAS (interrupt system, generic 8259, revision 0x13) at pci0 dev 20 function 2 not configured
uhci0 at pci0 dev 26 function 0: Intel 82801I USB UHCI Controller (rev. 0x02)
uhci0: interrupting at ioapic0 pin 17
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: Intel 82801I USB UHCI Controller (rev. 0x02)
uhci1: interrupting at ioapic0 pin 18
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 26 function 7: Intel 82801I USB EHCI Controller (rev. 0x02)
ehci0: 64-bit DMA
ehci0: interrupting at ioapic0 pin 19
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: 2 companion controllers, 2 ports each: uhci0 uhci1
ehci0: Using DMA subregion for control data structures
usb2 at ehci0: USB revision 2.0
uhci2 at pci0 dev 29 function 0: Intel 82801I USB UHCI Controller (rev. 0x02)
uhci2: interrupting at ioapic0 pin 21
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 1: Intel 82801I USB UHCI Controller (rev. 0x02)
uhci3: interrupting at ioapic0 pin 20
usb4 at uhci3: USB revision 1.0
ehci1 at pci0 dev 29 function 7: Intel 82801I USB EHCI Controller (rev. 0x02)
ehci1: 64-bit DMA
ehci1: interrupting at ioapic0 pin 21
ehci1: EHCI version 1.0
ehci1: 2 companion controllers, 2 ports each: uhci2 uhci3
ehci1: Using DMA subregion for control data structures
usb5 at ehci1: USB revision 2.0
ppb7 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0x92)
pci8 at ppb7 bus 8
pci8: i/o space, memory space enabled
vga0 at pci8 dev 3 function 0: Matrox MGA G200eW (rev. 0x0a)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
ichlpcib0 at pci0 dev 31 function 0: Intel 82801IB LPC Interface Bridge (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
piixide0 at pci0 dev 31 function 2: Intel 82801I Serial ATA Controller (ICH9) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to native-PCI mode
piixide0: using ioapic0 pin 23 for native-PCI interrupt
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to native-PCI mode
atabus1 at piixide0 channel 1
isa0 at ichlpcib0
tpm0 at isa0 iomem 0xfed40000-0xfed40fff irq 7
tpm0: device 0x0000104a rev 0x4e
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
acpicpu0: P0: FFH, lat 10 us, pow 80000 mW, 2395 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 80000 mW, 2394 MHz
acpicpu0: P2: FFH, lat 10 us, pow 66000 mW, 2261 MHz
acpicpu0: P3: FFH, lat 10 us, pow 55000 mW, 2128 MHz
acpicpu0: P4: FFH, lat 10 us, pow 50000 mW, 1995 MHz
acpicpu0: P5: FFH, lat 10 us, pow 41000 mW, 1862 MHz
acpicpu0: P6: FFH, lat 10 us, pow 34000 mW, 1729 MHz
acpicpu0: P7: FFH, lat 10 us, pow 30000 mW, 1596 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=95
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=95
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution, Tjmax=95
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution, Tjmax=95
acpicpu4 at cpu4: ACPI CPU
coretemp4 at cpu4: thermal sensor, 1 C resolution, Tjmax=95
acpicpu5 at cpu5: ACPI CPU
coretemp5 at cpu5: thermal sensor, 1 C resolution, Tjmax=95
acpicpu6 at cpu6: ACPI CPU
coretemp6 at cpu6: thermal sensor, 1 C resolution, Tjmax=95
acpicpu7 at cpu7: ACPI CPU
coretemp7 at cpu7: thermal sensor, 1 C resolution, Tjmax=95
acpicpu8 at cpu8: ACPI CPU
acpicpu9 at cpu9: ACPI CPU
acpicpu10 at cpu10: ACPI CPU
acpicpu11 at cpu11: ACPI CPU
acpicpu12 at cpu12: ACPI CPU
acpicpu13 at cpu13: ACPI CPU
acpicpu14 at cpu14: ACPI CPU
acpicpu15 at cpu15: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2394001000 Hz quality 3000
scsibus0: waiting 2 seconds for devices to settle...
uhub0 at usb1: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb0: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
uhub3 at usb5: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 4 ports with 4 removable, self powered
uhub4 at usb4: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb3: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
IPsec: Initialized Security Association Processing.
uhub6 at uhub2 port 3: vendor 0424 (0x0424) product 2514 (0x2514), class 9/0, rev 2.00/0.00, addr 2
uhub6: multiple transaction translators
uhub6: 3 ports with 3 removable, self powered
uhidev0 at uhub6 port 2 configuration 1 interface 0
uhidev0: DELL (0x413c) Dell USB Entry Keyboard (0x2107), rev 1.10/1.78, addr 3, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
sd0 at scsibus0 target 0 lun 0: <DELL, PERC 6/i, 1.22> disk fixed
sd0: fabricating a geometry
sd0: 1673 GB, 1713408 cyl, 64 head, 32 sec, 512 bytes/sect x 3509059584 sectors
sd0: fabricating a geometry
sd0: GPT GUID: 2ef85759-22df-4db4-838a-986451acb96b
dk0 at sd0: "cbf8d3ba-ec91-4488-875a-875a98883015", 3307755520 blocks at 2048, type: ffs
dk1 at sd0: "bb18de2a-3991-44ce-b01b-54212405aafe", 201301983 blocks at 3307757568, type: swap
sd0: tagged queueing
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <TSSTcorp DVD+/-RW TS-L633C, h1H3456789KLMN0P, D250> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
swwdog0: software watchdog initialized
WARNING: 4 errors while detecting hardware; check system log.
boot device: sd0
root on dk0 dumps on dk1
root file system type: ffs
kern.module.path=/stand/amd64/11.0/modules
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
mfi0: normal state on 'mfi0:0' (online)
ipmi0: version 32.0 interface KCS iobase 0xca8/0x8 spacing 4
ipmi0: ID 32.0 IPMI 2.0 Available +SDRs
ipmi0: Additional Chassis Bridge IPMBRcv FRU SEL SDR Sensor
ipmi0: Manufacturer 002a2 Product 01a2
ipmi0: Firmware 1.50