Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-12-20 00:42:11
From: JE3KMZ
Description: FreeBSD/amd64 on Dell Inc. PowerEdge T320
Copyright (c) 1992-2025 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 15.0-RELEASE releng/15.0-n280995-7aedc8de6446 GENERIC amd64
FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2)
VT(efifb): resolution 800x600
CPU: Intel(R) Pentium(R) CPU 1403 @ 2.60GHz (2600.15-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206d7 Family=0x6 Model=0x2d Stepping=7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x1fbee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x1<LAHF>
Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 103079215104 (98304 MB)
avail memory = 100656775168 (95993 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <DELL PE_SC3 >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: unblocking device.
ioapic1: MADT APIC ID 1 != hw id 15
ioapic0 <Version 2.0> irqs 0-23
ioapic1 <Version 2.0> irqs 32-55
Launching APs: 1
random: entropy device external interface
kbd0 at kbdmux0
WARNING: Device "spkr" is Giant locked and may be deleted before FreeBSD 16.0.
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0xb89bb000-0xb89bb01e
smbios0: Entry point: v2.1 (32-bit), Version: 2.7, BCD Revision: 2.7
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <DELL PE_SC3>
acpi0: Power Button (fixed)
apei0: <ACPI Platform Error Interface> on acpi0
ipmi0: <IPMI System Interface> port 0xca8,0xcac irq 10 on acpi0
ipmi0: KCS mode found at io 0xca8 on acpi
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
Event timer "HPET5" frequency 14318180 Hz quality 440
Event timer "HPET6" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff numa-domain 0 on acpi0
pci0: <ACPI PCI bus> numa-domain 0 on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 53 at device 1.0 numa-domain 0 on pci0
pci1: <ACPI PCI bus> numa-domain 0 on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 53 at device 1.1 numa-domain 0 on pci0
pci2: <ACPI PCI bus> numa-domain 0 on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 53 at device 3.0 numa-domain 0 on pci0
pci3: <ACPI PCI bus> numa-domain 0 on pcib3
pcib4: <PCI-PCI bridge> irq 16 at device 17.0 numa-domain 0 on pci0
pci4: <PCI bus> numa-domain 0 on pcib4
pci0: <simple comms> at device 22.0 (no driver attached)
pci0: <simple comms> at device 22.1 (no driver attached)
ehci0: <Intel Patsburg USB 2.0 controller> mem 0xde0fd000-0xde0fd3ff irq 23 at device 26.0 numa-domain 0 on pci0
usbus0: EHCI version 1.0
usbus0 numa-domain 0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
pcib5: <ACPI PCI-PCI bridge> at device 28.0 numa-domain 0 on pci0
pci5: <ACPI PCI bus> numa-domain 0 on pcib5
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.4 numa-domain 0 on pci0
pci6: <ACPI PCI bus> numa-domain 0 on pcib6
bge0: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0xd90a0000-0xd90affff,0xd90b0000-0xd90bffff,0xd90c0000-0xd90cffff irq 16 at device 0.0 numa-domain 0 on pci6
bge0: APE FW version: NCSI v1.1.7.0
bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus0: <MII bus> numa-domain 0 on bge0
brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Using defaults for TSO: 65518/35/2048
bge0: Ethernet address: [_MAC_XXXXXXXXXX]
bge1: <Broadcom NetXtreme Gigabit Ethernet, ASIC rev. 0x5720000> mem 0xd90d0000-0xd90dffff,0xd90e0000-0xd90effff,0xd90f0000-0xd90fffff irq 17 at device 0.1 numa-domain 0 on pci6
bge1: APE FW version: NCSI v1.1.7.0
bge1: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
miibus1: <MII bus> numa-domain 0 on bge1
brgphy1: <BCM5720C 1000BASE-T media interface> PHY 2 on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge1: Using defaults for TSO: 65518/35/2048
bge1: Ethernet address: [_MAC_XXXXXXXXXX]
pcib7: <ACPI PCI-PCI bridge> at device 28.6 numa-domain 0 on pci0
pci7: <ACPI PCI bus> numa-domain 0 on pcib7
pcib8: <ACPI PCI-PCI bridge> irq 19 at device 28.7 numa-domain 0 on pci0
pci8: <ACPI PCI bus> numa-domain 0 on pcib8
pcib9: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci8
pci9: <PCI bus> numa-domain 0 on pcib9
pcib10: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci9
pci10: <PCI bus> numa-domain 0 on pcib10
pcib11: <PCI-PCI bridge> at device 0.0 numa-domain 0 on pci10
pci11: <PCI bus> numa-domain 0 on pcib11
vgapci0: <VGA-compatible display> mem 0xd8000000-0xd8ffffff,0xdd7fc000-0xdd7fffff,0xdc800000-0xdcffffff irq 19 at device 0.0 numa-domain 0 on pci11
vgapci0: Boot video device
pcib12: <PCI-PCI bridge> at device 1.0 numa-domain 0 on pci9
pci12: <PCI bus> numa-domain 0 on pcib12
ehci1: <Intel Patsburg USB 2.0 controller> mem 0xde0fe000-0xde0fe3ff irq 22 at device 29.0 numa-domain 0 on pci0
usbus1: EHCI version 1.0
usbus1 numa-domain 0 on ehci1
usbus1: 480Mbps High Speed USB v2.0
pcib13: <PCI-PCI bridge> at device 30.0 numa-domain 0 on pci0
pci13: <PCI bus> numa-domain 0 on pcib13
isab0: <PCI-ISA bridge> at device 31.0 numa-domain 0 on pci0
isa0: <ISA bus> numa-domain 0 on isab0
ahci0: <Intel Patsburg AHCI SATA controller> port 0xfce8-0xfcef,0xfcf8-0xfcfb,0xfcf0-0xfcf7,0xfcfc-0xfcff,0xfcc0-0xfcdf mem 0xde0ff000-0xde0ff7ff irq 20 at device 31.2 numa-domain 0 on pci0
ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib14: <ACPI Host-PCI bridge> numa-domain 0 on acpi0
pci14: <ACPI PCI bus> numa-domain 0 on pcib14
pci14: <dasp, performance counters> at device 14.1 (no driver attached)
pci14: <dasp, performance counters> at device 19.1 (no driver attached)
pci14: <dasp, performance counters> at device 19.4 (no driver attached)
pci14: <dasp, performance counters> at device 19.5 (no driver attached)
pcib15: <ACPI Host-PCI bridge> on acpi0
pci15: <ACPI PCI bus> on pcib15
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
tpm0: <Trusted Platform Module> iomem 0xfed40000-0xfed44fff on acpi0
tpm: WEC WPCT200 rev 0x47
WARNING: Device "tpm" is Giant locked and may be deleted before FreeBSD 16.0.
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xec000-0xeffff pnpid ORM0000 on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
cpufreq0: <CPU frequency control> on cpu0
cpufreq1: <CPU frequency control> on cpu1
Timecounter "TSC-low" frequency 1299999718 Hz quality 1000
Timecounters tick every 1.000 msec
ugen0.1: <Intel EHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0 numa-domain 0 on usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub1 numa-domain 0 on usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ipmi0: IPMI device rev. 1, firmware rev. 1.35, version 2.0, device support mask 0xdf
ipmi0: Number of channels 6
ipmi0: Attached watchdog
ipmi0: Establishing power cycle handler
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/8/48/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/48/0x67<INT,USR,SYS,REA,WRI>
Trying to mount root from zfs:zroot/ROOT/default []...
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <SanDisk SSD PLUS 240GB UF5100RL> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXX]
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 228944MB (468877312 512 byte sectors)
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <SanDisk SSD PLUS 120 GB UE4500RL> ACS-2 ATA SATA 3.x device
ada1: [_SERIAL_NUMBER_XXXXXXXXX]
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 114480MB (234455040 512 byte sectors)
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <Hitachi HTS542512K9SA00 BB2OC33P> ATA8-ACS SATA 1.x device
ada2: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
ada2: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 114473MB (234441648 512 byte sectors)
ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
ada3: <HITACHI HTS542512K9SA00 BB2ZC3HP> ATA8-ACS SATA 1.x device
ada3: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX]
ada3: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 114473MB (234441648 512 byte sectors)
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0
ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0
ses0: ada2,pass2 in 'Slot 02', SATA Slot: scbus2 target 0
ses0: ada3,pass3 in 'Slot 03', SATA Slot: scbus3 target 0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub2 numa-domain 0 on uhub0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
uhub3 numa-domain 0 on uhub1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
Root mount waiting for: usbus0 usbus1
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
Root mount waiting for: usbus0 usbus1
ugen0.3: <no manufacturer Gadget USB HUB> at usbus0
uhub4 numa-domain 0 on uhub2
uhub4: <no manufacturer Gadget USB HUB, class 9/0, rev 2.00/0.00, addr 3> on usbus0
ugen1.3: <Fujitsu Component Limited USB Keyboard> at usbus1
usbhid0 numa-domain 0 on uhub3
usbhid0: <Fujitsu Component Limited USB Keyboard, class 0/0, rev 2.00/1.00, addr 3> on usbus1
hidbus0: <HID bus> numa-domain 0 on usbhid0
hkbd0: <Fujitsu Component Limited USB Keyboard> numa-domain 0 on hidbus0
kbd1 at hkbd0
uhub4: 6 ports with 6 removable, self powered
Root mount waiting for: usbus0
ugen0.4: <Avocent Keyboard/Mouse Function> at usbus0
usbhid1 numa-domain 0 on uhub4
usbhid1: <Avocent Keyboard/Mouse Function, class 0/0, rev 2.00/0.00, addr 4> on usbus0
hidbus1: <HID bus> numa-domain 0 on usbhid1
hkbd1: <Avocent Keyboard/Mouse Function> numa-domain 0 on hidbus1
kbd2 at hkbd1
usbhid2 numa-domain 0 on uhub4
usbhid2: <Avocent Keyboard/Mouse Function, class 0/0, rev 2.00/0.00, addr 4> on usbus0
hidbus2: <HID bus> numa-domain 0 on usbhid2
usbhid3 numa-domain 0 on uhub4
usbhid3: <Avocent Keyboard/Mouse Function, class 0/0, rev 2.00/0.00, addr 4> on usbus0
hidbus3: <HID bus> numa-domain 0 on usbhid3
WARNING: sysctl vfs.zfs.min_auto_ashift is deprecated. Use vfs.zfs.vdev.min_auto_ashift instead.
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: cannot find EC device
hms0: <Avocent Keyboard/Mouse Function Tablet> numa-domain 0 on hidbus2
hms0: 3 buttons and [XYW] coordinates ID=0
hms1: <Avocent Keyboard/Mouse Function> numa-domain 0 on hidbus3
hms1: 3 buttons and [XYW] coordinates ID=0
bridge0: Ethernet address: [_MAC_XXXXXXXXXX]
bridge0: changing name to 'bhyve0'
lo0: link state changed to UP
bge0: link state changed to DOWN
bge0: link state changed to UP
bge1: link state changed to DOWN
bhyve0: WARNING: Adding member interface bge1 which has an IP address assigned is deprecated and will be unsupported in a future release.
bhyve0: link state changed to DOWN
bge1: promiscuous mode enabled
bge1: link state changed to UP
bhyve0: link state changed to UP
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled
WARNING: sysctl vfs.zfs.min_auto_ashift is deprecated. Use vfs.zfs.vdev.min_auto_ashift instead.