Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2026-01-01 01:47:05
From: Jun Ebihara
Description: NetBSD 11.99.4 macppc on qemu
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
2024, 2025
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 11.99.4 (GENERIC) #0: Wed Dec 31 20:57:29 UTC 2025
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/macppc/compile/GENERIC
total memory = 256 MB
avail memory = 226 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
found openpic PIC at 80040000
OpenPIC Version 1.2: Supports 1 CPUs and 64 interrupt sources.
bootpath: /pci@f2000000/mac-io@c/ata-3@21000/cdrom@0:2,netbsd-GENERIC
mainbus0 (root): PowerMac3,1
cpu0 at mainbus0: 7400 (Revision 2.9), ID 0 (primary)
cpu0: HID0 0x809400a4<EMCP,DOZE,DPM,EIEC,SGE,BTIC,BHT>, powersave: 1
cpu0: 0.00 MHz L2 cache present but not enabled
memory0 at mainbus0
uninorth0 at mainbus0
pci0 at uninorth0 bus 0
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 11 function 0
pchb0: Apple Computer UniNorth Host-PCI Bridge (rev. 0x00)
obio0 at pci0 dev 12 function 0: addr 0x80000000
obio0: enabling KeyLargo internal modem
cuda0 at obio0 offset 0x16000 irq 25
nadb0 at cuda0: Apple Desktop Bus
iic0 at cuda0: I2C bus
zsc0 at obio0 irq 37,36
zstty0 at zsc0 channel 0 (console i/o)
zstty1 at zsc0 channel 1
wdc0 at obio0 offset 0x20000 irq 13, level triggered: DMA transfer
atabus0 at wdc0 channel 0
wdc1 at obio0 offset 0x21000 irq 14, level triggered: DMA transfer
atabus1 at wdc1 channel 0
ohci0 at pci0 dev 13 function 0: Apple Computer Intrepid USB Controller (rev. 0x00)
ohci0: interrupting at irq 28
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
genfb0 at pci0 dev 14 function 0: vendor 1234 product 1111 (rev. 0x02)
wm0 at pci0 dev 15 function 0, 32-bit DMA: Intel i82540EM 1000BASE-T Ethernet (rev. 0x03)
wm0: interrupting at irq 30
wm0: 32-bit 33MHz PCI bus
wm0: 64 words (6 address bits) MicroWire EEPROM
wm0: RX packet buffer size: 48KB
wm0: Ethernet address [_MAC_XXXXXXXXXX]
wm0: 0x200002<LOCK_EECD,WOL>
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 0
makphy0: Failed to access EADR. Are you an emulator?
makphy0: Failed to read EXTSR. Are you an emulator?. Regard as 1000BASE-T.
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uni_n0 at mainbus0 address 0xf8000000
vmmask 7f000000 schedmask 7f000000 highmask 7f000000
WARNING: system needs entropy for security; see entropy(7)
timecounter: Timecounter "mftb" frequency 25000000 Hz quality 100
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
IPsec: Initialized Security Association Processing.
adbkbd0 at nadb0 addr 2: mapped device (0)
wskbd0 at adbkbd0 mux 1
wsmouse0 at adbkbd0 mux 0
adbms0 at nadb0 addr 3: relative positioning device (mouse?) (0)
wsmouse1 at adbms0 mux 0
wd0 at atabus0 drive 1
wd0: <QEMU HARDDISK>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 1536 MB, 3120 cyl, 16 head, 63 sec, 512 bytes/sect x 3145728 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(wdc0:0:1): using PIO mode 4, DMA mode 2 (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <QEMU DVD-ROM, QM00003, 2.5+> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd1 at atabus1 drive 1
wd1: <QEMU HARDDISK>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 5230 MB, 10627 cyl, 16 head, 63 sec, 512 bytes/sect x 10712016 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(wdc1:0:0): using PIO mode 4, DMA mode 2 (using DMA)
wd1(wdc1:0:1): using PIO mode 4, DMA mode 2 (using DMA)
swwdog0: software watchdog initialized
entropy: best effort
boot device: <unknown>
root device: wd0
dump device (default wd0b):
file system (default generic):
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/macppc/11.99.4/modules
init path (default /sbin/init):
init: trying /sbin/init
entropy: ready