Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2026-01-15 13:30:21
From: jason
Description: FreeBSD/amd64 on Dell Inc. Latitude 7400
---<<BOOT>>--- Copyright (c) 1992-2025 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 15.0-RELEASE releng/15.0-n280995-7aedc8de6446 GENERIC amd64 FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) VT(efifb): resolution 1920x1080 CPU: Intel(R) Core(TM) i5-8365U CPU @ 1.60GHz (1900.00-MHz K8-class CPU) Origin="GenuineIntel" Id=0x806ec Family=0x6 Model=0x8e Stepping=12 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x121<LAHF,ABM,Prefetch> Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> Structured Extended Features3=0xbc000e00<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> IA32_ARCH_CAPS=0xa0a0cab<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TSX_CTRL> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 16336617472 (15579 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <DELL CBX3 > FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads random: registering fast source Intel Secure Key Seed random: fast provider: "Intel Secure Key Seed" random: unblocking device. ioapic0 <Version 2.0> irqs 0-119 Launching APs: 1 2 3 6 5 7 4 random: entropy device external interface kbd1 at kbdmux0 efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s smbios0: <System Management BIOS> at iomem 0xf0020-0xf0037 smbios0: Entry point: v3 (64-bit), Version: 3.2 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> acpi0: <DELL CBX3 > cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 24000000 Hz quality 950 Event timer "HPET" frequency 24000000 Hz quality 550 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x6e> port 0x930,0x934 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xcb000000-0xcbffffff,0x80000000-0x8fffffff at device 2.0 on pci0 vgapci0: Boot video device xhci0: <XHCI (generic) USB 3.0 controller> mem 0xcc300000-0xcc30ffff at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: xECP capabilities <PROTO,PROTO,VEND(c0),LEGACY,VEND(c6),VEND(c7),VEND(c2),DEBUG,VEND(c3),VEND(c4),VEND(c5),VEND(c8),VEND(c9),VEND(ca),VEND(cb)> usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <memory, RAM> at device 20.2 (no driver attached) pci0: <network> at device 20.3 (no driver attached) pci0: <serial bus> at device 21.0 (no driver attached) pci0: <serial bus> at device 21.1 (no driver attached) pci0: <serial bus> at device 21.3 (no driver attached) pci0: <simple comms> at device 22.0 (no driver attached) pci0: <simple comms, UART> at device 22.3 (no driver attached) pci0: <serial bus> at device 25.0 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 pci2: <ACPI PCI bus> on pcib2 pcib3: <PCI-PCI bridge> at device 0.0 on pci2 pci3: <PCI bus> on pcib3 pcib4: <PCI-PCI bridge> at device 1.0 on pci2 pcib5: <ACPI PCI-PCI bridge> at device 2.0 on pci2 pci4: <ACPI PCI bus> on pcib5 xhci1: <Intel Alpine Ridge Thunderbolt 3 USB controller> mem 0xc9f00000-0xc9f0ffff at device 0.0 on pci4 xhci1: 32 bytes context size, 64-bit DMA xhci1: xECP capabilities <PROTO,VEND(c0),LEGACY,VEND(c6),VEND(c7),VEND(c2),DEBUG,VEND(c3),VEND(c4),VEND(c5),VEND(c8),VEND(c9),PROTO,VEND(ca)> usbus1 on xhci1 usbus1: 5.0Gbps Super Speed USB v3.0 pcib6: <ACPI PCI-PCI bridge> at device 29.0 on pci0 pci5: <ACPI PCI bus> on pcib6 pci5: <unknown> at device 0.0 (no driver attached) pcib7: <ACPI PCI-PCI bridge> at device 29.4 on pci0 pci6: <ACPI PCI bus> on pcib7 nvme0: <Generic NVMe Device> mem 0xcc100000-0xcc103fff at device 0.0 on pci6 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 hdac0: <Intel Cannon Lake HDA Controller> mem 0xcc318000-0xcc31bfff,0xcc000000-0xcc0fffff at device 31.3 on pci0 pci0: <serial bus> at device 31.5 (no driver attached) acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] acpi_syscontainer0: <System Container> on acpi0 hwpstate_intel0: <Intel Speed Shift> on cpu0 cpufreq0: <CPU frequency control> on cpu0 hwpstate_intel1: <Intel Speed Shift> on cpu1 cpufreq1: <CPU frequency control> on cpu1 hwpstate_intel2: <Intel Speed Shift> on cpu2 cpufreq2: <CPU frequency control> on cpu2 hwpstate_intel3: <Intel Speed Shift> on cpu3 cpufreq3: <CPU frequency control> on cpu3 hwpstate_intel4: <Intel Speed Shift> on cpu4 cpufreq4: <CPU frequency control> on cpu4 hwpstate_intel5: <Intel Speed Shift> on cpu5 cpufreq5: <CPU frequency control> on cpu5 hwpstate_intel6: <Intel Speed Shift> on cpu6 cpufreq6: <CPU frequency control> on cpu6 hwpstate_intel7: <Intel Speed Shift> on cpu7 cpufreq7: <CPU frequency control> on cpu7 Timecounter "TSC" frequency 1895999830 Hz quality 1000 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) ugen0.1: <Intel XHCI root HUB> at usbus0 ugen1.1: <Intel XHCI root HUB> at usbus1 uhub0 on usbus0 uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub1 on usbus1 uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 battery0: critically low charge! hdacc0: <Realtek ALC295 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC295 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC295 (Analog)> at nid 20 and 18 on hdaa0 pcm1: <Realtek ALC295 (Right Analog Headphones)> at nid 33 on hdaa0 hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 nda0 at nvme0 bus 0 scbus0 target 0 lun 1 nda0: <SAMSUNG MZVLB256HAHQ-000L7 1L2QEXD7 S41GNB1K518661> nda0: [_SERIAL_NUMBER_XXXXXXXXXXX] nda0: nvme version 1.2 nda0: 244198MB (500118192 512 byte sectors) Trying to mount root from zfs:zroot/ROOT/default []... uhub1: 4 ports with 4 removable, self powered uhub0: 18 ports with 18 removable, self powered Root mount waiting for: usbus0 ugen0.2: <CKFHH66P171430044300 IntegratedWebcamHD> at usbus0 ugen0.3: <vendor 0x8087 product 0x0aaa> at usbus0 [drm] Got Intel graphics stolen memory base 0x7b800000, size 0x2000000 drmn0: <drmn> on vgapci0 vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io i915/kbl_dmc_ver1_04.bin: could not load binary firmware /boot/firmware/i915/kbl_dmc_ver1_04.bin either lkpi_iic0: <LinuxKPI I2C> on drmn0 iicbus0: <Philips I2C bus> on lkpi_iic0 iic0: <I2C generic I/O> on iicbus0 lkpi_iic1: <LinuxKPI I2C> on drmn0 iicbus1: <Philips I2C bus> on lkpi_iic1 iic1: <I2C generic I/O> on iicbus1 lkpi_iic2: <LinuxKPI I2C> on drmn0 iicbus2: <Philips I2C bus> on lkpi_iic2 iic2: <I2C generic I/O> on iicbus2 lkpi_iic3: <LinuxKPI I2C> on drmn0 iicbus3: <Philips I2C bus> on lkpi_iic3 iic3: <I2C generic I/O> on iicbus3 kbl_dmc_ver1_04.bin: could not load binary firmware /boot/firmware/kbl_dmc_ver1_04.bin either i915_kbl_dmc_ver1_04.bin: could not load binary firmware /boot/firmware/i915_kbl_dmc_ver1_04.bin either drmn0: successfully loaded firmware image 'i915/kbl_dmc_ver1_04.bin' drmn0: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) drmn0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it drmn0: [drm] [ENCODER:117:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it sysctl_add_oid: can't re-use a leaf (hw.dri.debug)! lkpi_iic4: <LinuxKPI I2C> on drm1 iicbus4: <Philips I2C bus> on lkpi_iic4 iic4: <I2C generic I/O> on iicbus4 lkpi_iic5: <LinuxKPI I2C> on drm2 iicbus5: <Philips I2C bus> on lkpi_iic5 iic5: <I2C generic I/O> on iicbus5 lkpi_iic6: <LinuxKPI I2C> on drm4 iicbus6: <Philips I2C bus> on lkpi_iic6 iic6: <I2C generic I/O> on iicbus6 [drm] Initialized i915 1.6.0 20201103 for drmn0 on minor 0 VT: Replacing driver "efifb" with new "drmfb". start FB_INFO: height=1080 width=1920 depth=32 pbase=0x80000000 vbase=0xfffff80080000000 name=drmn0 id=i915drmfb flags=0x0 stride=7680 end FB_INFO pchtherm0: <CannonLake-LP Thermal Subsystem> mem 0xcc32a000-0xcc32afff at device 18.0 on pci0 iwm0: <Intel(R) Dual Band Wireless AC 9560> mem 0xcc31c000-0xcc31ffff at device 20.3 on pci0 iwm9000fw: could not load firmware image, error 8 iwm0: hw rev 0x310, fw ver 34.3125811985.0, address [_MAC_XXXXXXXXXX] ig4iic0: <Intel Cannon Lake-LP I2C Controller-2> at device 21.0 on pci0 ig4iic0: Using MSI iicbus7: <Philips I2C bus (ACPI-hinted)> on ig4iic0 iic7: <I2C generic I/O> on iicbus7 ig4iic1: <Intel Cannon Lake-LP I2C Controller-3> at device 21.1 on pci0 ig4iic1: Using MSI iicbus8: <Philips I2C bus (ACPI-hinted)> on ig4iic1 iicbus8: <unknown card> at addr 0x2c iic8: <I2C generic I/O> on iicbus8 ig4iic2: <Intel Cannon Lake-LP I2C Controller-5> at device 21.3 on pci0 ig4iic2: Using MSI iicbus9: <Philips I2C bus (ACPI-hinted)> on ig4iic2 iic9: <I2C generic I/O> on iicbus9 ig4iic3: <Intel Cannon Lake-LP I2C Controller-0> at device 25.0 on pci0 ig4iic3: Using MSI iicbus10: <Philips I2C bus (ACPI-hinted)> on ig4iic3 iic10: <I2C generic I/O> on iicbus10 rtsx0: <2.1g Realtek RTS525A PCIe SD Card Reader> mem 0xcc200000-0xcc200fff at device 0.0 on pci5 rtsx0: No card is detected acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi1: <ACPI-WMI mapping> on acpi0 acpi_wmi1: Embedded MOF found acpi_wmi2: <ACPI-WMI mapping> on acpi0 acpi_wmi2: Embedded MOF found acpi_wmi3: <ACPI-WMI mapping> on acpi0 acpi_wmi3: Embedded MOF found acpi_wmi4: <ACPI-WMI mapping> on acpi0 acpi_wmi4: Embedded MOF found acpi_wmi5: <ACPI-WMI mapping> on acpi0 acpi_wmi5: Embedded MOF found CPU: Intel(R) Core(TM) i5-8365U CPU @ 1.60GHz (1896.00-MHz K8-class CPU) Origin="GenuineIntel" Id=0x806ec Family=0x6 Model=0x8e Stepping=12 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x121<LAHF,ABM,Prefetch> Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> Structured Extended Features3=0xbc000e00<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> IA32_ARCH_CAPS=0xa0a0cab<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME,MDS_NO,TSX_CTRL> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics hdac0: Command 0x2033b000 timeout on address 2 wlan0: Ethernet address: [_MAC_XXXXXXXXXX] lo0: link state changed to UP iichid0: <DELL08E1:00 06CB:CD97 I2C HID device> at addr 0x2c irq 51 on iicbus8 hidbus0: <HID bus> on iichid0 wlan0: link state changed to UP hms0: <DELL08E1:00 06CB:CD97 Mouse> on hidbus0 hms0: 2 buttons and [XY] coordinates ID=2 hmt0: <DELL08E1:00 06CB:CD97 TouchPad> on hidbus0 hconf0: <DELL08E1:00 06CB:CD97 Configuration> on hidbus0 hmt0: Multitouch touchpad with 2 external buttons hmt0: 5 contacts with [C] properties. Report range [0:0] - [1196:600]