Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

Date: 2026-01-24 16:28:23
From: vinishor
Description: OpenBSD on a Dell Wyse Cx0
OpenBSD 7.8 (GENERIC) #113: Sun Oct 12 15:23:27 MDT 2025
    [_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
real mem  = 266674176 (254MB)
avail mem = 244084736 (232MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 10/07/09, BIOS32 rev. 0 @ 0xfdd30, SMBIOS rev. 2.6 @ 0xfed8000 (48 entries)
bios0: vendor Phoenix Technologies version "1.0B" date 10/07/2009
bios0: WYSE C CLASS
acpi0 at bios0: ACPI 3.0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC MCFG HPET
acpi0: wakeup devices PWRB(S4) PCI0(S5) PS2M(S3) PS2K(S3) USB1(S4) USB2(S4) USB3(S4) USB4(S4) USB5(S4) HDAC(S5) SP2P(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: VIA Eden Processor 1000MHz ("CentaurHauls" 686-class) 1.01 GHz, 06-0d-00
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE,SSE3,EST,TM2,xTPR,NXE
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: RNG AES AES-CTR SHA1 SHA256 RSA
cpu0: apic clock running at 100MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 3, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-0
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (SP2P)
acpibtn0 at acpi0: PWRB(wakeup)
"PNP0A03" at acpi0 not configured
acpicmos0 at acpi0
"PNP0F13" at acpi0 not configured
"PNP0303" at acpi0 not configured
acpicpu0 at acpi0: !C3(@800 io@0x4015), !C2(@80 io@0x4014), C1(@1 halt!), PSS
acpitz0 at acpi0
acpitz0: critical temperature is 105 degC
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: LCD_
bios0: ROM list: 0xc0000/0xc200 0xcc800/0x1800
cpu0: Enhanced SpeedStep 1001 MHz: speeds: 1000, 400 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 vendor "VIA", unknown product 0x0409 rev 0x03
pchb1 at pci0 dev 0 function 1 vendor "VIA", unknown product 0x1409 rev 0x00
pchb2 at pci0 dev 0 function 2 vendor "VIA", unknown product 0x2409 rev 0x00
pchb3 at pci0 dev 0 function 3 vendor "VIA", unknown product 0x3409 rev 0x00
pchb4 at pci0 dev 0 function 4 vendor "VIA", unknown product 0x4409 rev 0x00
vendor "VIA", unknown product 0x5409 (class system subclass interrupt, rev 0x00) at pci0 dev 0 function 5 not configured
pchb5 at pci0 dev 0 function 6 vendor "VIA", unknown product 0x6409 rev 0x00
pchb6 at pci0 dev 0 function 7 vendor "VIA", unknown product 0x7409 rev 0x00
vga1 at pci0 dev 1 function 0 vendor "VIA", unknown product 0x5122 rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pciide0 at pci0 dev 15 function 0 "VIA VX855 IDE" rev 0x00: ATA133, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <128MB ATA Flash Disk>
wd0: 1-sector PIO, LBA, 122MB, 250112 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
pciide0: channel 1 ignored (disabled)
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0xa0: apic 1 int 20
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0xa0: apic 1 int 22
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0xa0: apic 1 int 21
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x90: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VX855 ISA" rev 0x00: SMI
iic0 at viapm0
admtemp0 at iic0 addr 0x4c: g781
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
pchb7 at pci0 dev 17 function 7 "VIA VX800 Host" rev 0x00
ppb0 at pci0 dev 19 function 0 "VIA VX800" rev 0x00
pci1 at ppb0 bus 1
vge0 at pci1 dev 3 function 0 "VIA VT612x" rev 0x11: apic 1 int 16, address [_MAC_XXXXXXXXXX]
ciphy0 at vge0 phy 1: CS8201, rev. 2
azalia0 at pci0 dev 20 function 0 "VIA HD Audio" rev 0x20: apic 1 int 17
azalia0: codecs: VIA VT1702
audio0 at azalia0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
umass0 at uhub0 port 3 configuration 1 interface 0 " PS12M008GA01MC5" rev 2.10/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <, PS12M008GA01MC5, 7.0A> serial.13fe57007AE0D2B1DD97
sd0: 7392MB, 512 bytes/sector, 15138816 sectors
uhidev0 at uhub1 port 2 configuration 1 interface 0 "Hoksi Technology DURGOD Taurus K320" rev 2.00/1.08 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 2 configuration 1 interface 1 "Hoksi Technology DURGOD Taurus K320" rev 2.00/1.08 addr 2
uhidev1: iclass 3/1, 4 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
ucc0 at uhidev1 reportid 2: 573 usages, 20 keys, array
wskbd2 at ucc0 mux 1
wskbd2: connecting to wsdisplay0
ukbd1 at uhidev1 reportid 3: 104 variable keys, 0 key codes
wskbd3 at ukbd1 mux 1
wskbd3: connecting to wsdisplay0
ums0 at uhidev1 reportid 4: 5 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhidev2 at uhub1 port 2 configuration 1 interface 2 "Hoksi Technology DURGOD Taurus K320" rev 2.00/1.08 addr 2
uhidev2: iclass 3/0
uhid1 at uhidev2: input=64, output=64, feature=64
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (b4493a54a903206b.a) swap on sd0b dump on sd0b