Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2026-10-15 01:16:54
From: linear
Description: NetBSD/sparc64 11.0 on Sun Fire V100
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.000000] 2024, 2025, 2026 [ 1.000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 11.0 (GENERIC) #0: Thu Jul 30 15:23:12 UTC 2026 [ 1.000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/sparc64/compile/GENERIC [ 1.000000] total memory = 512 MB [ 1.000000] avail memory = 480 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] Kernelized RAIDframe activated [ 1.000000] mainbus0 (root): SUNW,UltraAX-i2 (Sun Fire V100): [_HOSTID_XXXXX] [ 1.000000] cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 548 MHz, CPU id 0 [ 1.000000] cpu0: manuf 17, impl 13, mask 33 [ 1.000000] cpu0: system tick frequency 5.555 MHz [ 1.000000] cpu0: 16K instruction (32 b/l), 16K data (32 b/l), 512K external (64 b/l) [ 1.000000] psycho0 at mainbus0 [ 1.000000] psycho0: SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 0; PCI bus 0 [ 1.000000] pci0 at psycho0 [ 1.000000] pci0: i/o space, memory space enabled [ 1.000000] ebus0 at pci0 dev 7 function 0: Acer Labs M1533 PCI-ISA Bridge, revision 0x00 [ 1.000000] dma at ebus0 addr 0-ffff ipl 2a not configured [ 1.000000] rtc0 at ebus0 addr 70-71: mc146818 compatible time-of-day clock: m5819 [ 1.000000] power at ebus0 addr 2000-2007 ipl 23 not configured [ 1.000000] lom0 at ebus0 addr 8010-8011 ipl 2a: SUNW,lomh: LOMlite2 rev 3.12 [ 1.000000] lom0: 1 fan(s), 1 PSU(s), 1 temp sensor(s) [ 1.000000] lom0: Watchdog timer configured. [ 1.000000] com0 at ebus0 addr 3f8-3ff ipl 2b: ns16550a, 16-byte FIFO [ 1.000000] com0: console [ 1.000000] com1 at ebus0 addr 2e8-2ef ipl 2b: ns16550a, 16-byte FIFO [ 1.000000] flashprom at ebus0 addr 0-7ffff not configured [ 1.000000] alipm0 at pci0 dev 3 function 0: 74KHz clock [ 1.000000] iic0 at alipm0: I2C bus [ 1.000000] admtemp0 at iic0 addr 0x18: MAX1617A temperature sensor: id. 0x41, rev. 0x34 [ 1.000000] spdmem0 at iic0 addr 0x56 [ 1.000000] spdmem0: SDRAM (registered), data ECC, 256MB, 143MHz (PC-133) [ 1.000000] spdmem0: 12 rows, 10 cols, 2 banks, 4 banks/chip, 7.0ns cycle time [ 1.000000] spdmem0: tAA-tRCD-tRP-tRAS: 3-15-15-42 [ 1.000000] spdmem0: voltage LvTTL (not 5V tolerant), refresh time 15.625us (self-refreshing) [ 1.000000] spdmem1 at iic0 addr 0x57 [ 1.000000] spdmem1: SDRAM (registered), data ECC, 256MB, 133MHz (PC-133) [ 1.000000] spdmem1: 13 rows, 10 cols, 1 banks, 4 banks/chip, 7.5ns cycle time [ 1.000000] spdmem1: tAA-tRCD-tRP-tRAS: 3-20-20-45 [ 1.000000] spdmem1: voltage LvTTL (not 5V tolerant), refresh time 7.8us (self-refreshing) [ 1.000000] seeprom0 at iic0 addr 0x50: i2c-nvram: size 8192 [ 1.000000] seeprom1 at iic0 addr 0x51: motherboard-fru: size 8192 [ 1.000000] tlp0 at pci0 dev 12 function 0: Davicom DM9102A Ethernet, pass 3.1 [ 1.000000] tlp0: interrupting at ivec 3006 [ 1.000000] tlp0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000000] dmphy0 at tlp0 phy 1: DM9102 10/100 media interface, rev. 0 [ 1.000000] dmphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.000000] tlp1 at pci0 dev 5 function 0: Davicom DM9102A Ethernet, pass 3.1 [ 1.000000] tlp1: interrupting at ivec 301c [ 1.000000] tlp1: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000000] dmphy1 at tlp1 phy 1: DM9102 10/100 media interface, rev. 0 [ 1.000000] dmphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.000000] ohci0 at pci0 dev 10 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03) [ 1.000000] ohci0: interrupting at ivec 24 [ 1.000000] ohci0: OHCI version 1.0, legacy support [ 1.000000] usb0 at ohci0: USB revision 1.0 [ 1.000000] aceride0 at pci0 dev 13 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc3) [ 1.000000] aceride0: bus-master DMA support present [ 1.000000] aceride0: using PIO transfers above 137GB as workaround for 48bit DMA access bug, expect reduced performance [ 1.000000] aceride0: primary channel configured to native-PCI mode [ 1.000000] aceride0: using ivec 280c for native-PCI interrupt [ 1.000000] atabus0 at aceride0 channel 0 [ 1.000000] aceride0: secondary channel configured to native-PCI mode [ 1.000000] atabus1 at aceride0 channel 1 [ 1.000000] pcons at mainbus0 not configured [ 1.000000] WARNING: system needs entropy for security; see entropy(7) [ 1.000000] timecounter: Timecounter "tick-counter" frequency 548000000 Hz quality 100 [ 1.000003] timecounter: Timecounter "stick-counter" frequency 5555555 Hz quality 200 [ 1.000040] No counter-timer -- using STICK at 5.555MHz as system clock. [ 1.000040] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.120030] uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.229161] uhub0: 2 ports with 2 removable, self powered [ 1.280016] atapibus0 at atabus1: 2 targets [ 1.340019] cd0 at atapibus0 drive 1: <CD-224E, , P.9A> cdrom removable [ 1.415982] cd0: drive supports PIO mode 4, DMA mode 2 [ 1.415982] wd0 at atabus1 drive 0 [ 1.456506] wd0: <SDCFXS-032G> [ 1.494953] wd0: drive supports 1-sector PIO transfers, LBA48 addressing [ 1.494953] wd0: 30535 MB, 62041 cyl, 16 head, 63 sec, 512 bytes/sect x 62537328 sectors [ 1.591584] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 7 [ 1.591584] wd0(aceride0:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA) [ 1.591584] cd0(aceride0:1:1): using PIO mode 4 [ 1.940009] swwdog0: software watchdog initialized [ 1.997033] root on wd0a dumps on wd0b [ 2.041707] root file system type: ffs [ 2.086389] kern.module.path=/stand/sparc64/11.0/modules [ 3.050010] entropy: best effort [ 3.480002] entropy: ready