Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2014-08-01 11:13:38
From: peter_ljung
Description: HP t5720 Thin Client
OpenBSD 5.5 (GENERIC) #276: Wed Mar 5 09:57:06 MST 2014
[_EMAIL_XXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) Processor ("AuthenticAMD" 686-class, 256KB L2 cache) 1.01 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,MPC,MMXX,3DNOW2,3DNOW
real mem = 251097088 (239MB)
avail mem = 234692608 (223MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/14/05, BIOS32 rev. 0 @ 0xfa640, SMBIOS rev. 2.3 @ 0xf0800 (34 entries)
bios0: vendor Phoenix Technologies, LTD version "786A1 v1.03" date 12/14/2005
bios0: Hewlett-Packard hp t5000 series
acpi0 at bios0: rev 0
acpi0: sleep states S0 S5
acpi0: tables DSDT FACP SSDT APIC
acpi0: wakeup devices FUTS(S4) USB0(S5) USB1(S5) USB2(S5) USB3(S5) AMR0(S4) UAR1(S5) PS2M(S5) PS2K(S4) PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 266MHz
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 14, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: PSS
acpitz0 at acpi0### AML PARSE ERROR (0x32c5): Undefined name: RBYT
error evaluating: \\_TZ_.THRM._TMP
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: FUTS
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000! 0xcc000/0x2000
cpu0: PowerNow! K7 1001 MHz: speeds: 1000 800 667 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "SiS 741 PCI" rev 0x03
sisagp0 at pchb0
agp0 at sisagp0: aperture at 0xe8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "SiS 648FX AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SiS 6330 VGA" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SiS 85C503 System" rev 0x25
pciide0 at pci0 dev 2 function 5 "SiS 5513 EIDE" rev 0x00: 741: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: < 512MB ATA Flash Disk>
wd0: 1-sector PIO, LBA, 488MB, 1000944 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 ignored (disabled)
auich0 at pci0 dev 2 function 7 "SiS 7012 AC97" rev 0xa0: apic 2 int 18, SiS7012 AC97
ac97: codec id 0x414c4760 (Avance Logic ALC655 rev 0)
audio0 at auich0
ohci0 at pci0 dev 3 function 0 "SiS 5597/5598 USB" rev 0x0f: apic 2 int 20, version 1.0, legacy support
ohci1 at pci0 dev 3 function 1 "SiS 5597/5598 USB" rev 0x0f: apic 2 int 21, version 1.0, legacy support
ehci0 at pci0 dev 3 function 2 "SiS 7002 USB" rev 0x00: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "SiS EHCI root hub" rev 2.00/1.00 addr 1
vr0 at pci0 dev 10 function 0 "VIA RhineII-2" rev 0x8d: apic 2 int 19, address [_MAC_XXXXXXXXXX]
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 13: OUI 0x004063, model 0x0034
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "SiS OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "SiS OHCI root hub" rev 1.00/1.00 addr 1
uhidev0 at uhub1 port 3 configuration 1 interface 0 "CHICONY HP Basic USB Keyboard" rev 1.10/3.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
root on wd0a (698cc4681e6ccf55.a) swap on wd0b dump on wd0b
hw.machine=i386
hw.model=AMD Athlon(tm) Processor ("AuthenticAMD" 686-class, 256KB L2 cache)
hw.ncpu=1
hw.byteorder=1234
hw.pagesize=4096
hw.disknames=wd0:698cc4681e6ccf55
hw.diskcount=1
hw.cpuspeed=1001
hw.setperf=100
hw.vendor=Hewlett-Packard
hw.product=hp t5000 series
hw.serialno=CNV70401SQ
hw.uuid=17363c50-3f86-7485-d711-601d20c44e03
hw.physmem=251097088
hw.usermem=251084800
hw.ncpufound=1
hw.allowpowerdown=1