Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2015-05-20 14:39:56
From: msaitoh
Description: X10SLX-F
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.99.17 (GENERIC) #239: Wed May 20 23:31:30 JST 2015
[_EMAIL_XXXXXXXXXXXXXX]:/disk/sources/9NetBSD-current/src/sys/arch/amd64/compile/GENERIC
total memory = 16342 MB
avail memory = 15850 MB
rnd: seeded with 128 bits
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Supermicro X10SLX-F (0123456789)
mainbus0 (root)
ACPI: RSDP 0x00000000000F0490 000024 (v02 SUPERM)
ACPI: XSDT 0x00000000DD92D098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: FACP 0x00000000DD93C3E0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DD92D1E8 00F1F3 (v02 SUPERM SMCI--MB 00000000 INTL 20120711)
ACPI: FACS 0x00000000DD95DF80 000040
ACPI: APIC 0x00000000DD93C4F0 000092 (v03 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DD93C588 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DD93C5D0 000BEE (v01 Ther_R Ther_Rvp 00001000 INTL 20120711)
ACPI: SSDT 0x00000000DD93D1C0 0004FE (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 0x00000000DD93D6C0 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20051117)
ACPI: SSDT 0x00000000DD93E238 0002F2 (v01 PmRef Cpu0Tst 00003000 INTL 20051117)
ACPI: SSDT 0x00000000DD93E530 000348 (v01 PmRef ApTst 00003000 INTL 20051117)
ACPI: MCFG 0x00000000DD93E878 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097)
ACPI: HPET 0x00000000DD93E8B8 000038 (v01 SUPERM SMCI--MB 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000DD93E8F0 000397 (v01 SataRe SataTabl 00001000 INTL 20120711)
ACPI: SSDT 0x00000000DD93EC88 005B5E (v01 SaSsdt SaSsdt 00003000 INTL 20120711)
ACPI: SPMI 0x00000000DD9447E8 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000)
ACPI: DMAR 0x00000000DD944828 000078 (v01 INTEL BDW 00000001 INTL 00000001)
ACPI: EINJ 0x00000000DD9448A0 000130 (v01 AMI AMI EINJ 00000000 00000000)
ACPI: ERST 0x00000000DD9449D0 000230 (v01 AMIER AMI ERST 00000000 00000000)
ACPI: HEST 0x00000000DD944C00 0000A8 (v01 AMI AMI HEST 00000000 00000000)
ACPI: BERT 0x00000000DD944CA8 000030 (v01 AMI AMI BERT 00000000 00000000)
ACPI: All ACPI Tables successfully acquired
cpu0 at mainbus0 apid 0
cpu0: Intel(R) Xeon(R) CPU E3-1240L v3 @ 2.00GHz, id 0x306c3
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Xeon(R) CPU E3-1240L v3 @ 2.00GHz, id 0x306c3
cpu2 at mainbus0 apid 4
cpu2: Intel(R) Xeon(R) CPU E3-1240L v3 @ 2.00GHz, id 0x306c3
cpu3 at mainbus0 apid 6
cpu3: Intel(R) Xeon(R) CPU E3-1240L v3 @ 2.00GHz, id 0x306c3
cpu4 at mainbus0 apid 1
cpu4: Intel(R) Xeon(R) CPU E3-1240L v3 @ 2.00GHz, id 0x306c3
cpu5 at mainbus0 apid 3
cpu5: Intel(R) Xeon(R) CPU E3-1240L v3 @ 2.00GHz, id 0x306c3
cpu6 at mainbus0 apid 5
cpu6: Intel(R) Xeon(R) CPU E3-1240L v3 @ 2.00GHz, id 0x306c3
cpu7 at mainbus0 apid 7
cpu7: Intel(R) Xeon(R) CPU E3-1240L v3 @ 2.00GHz, id 0x306c3
ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 0x20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20150410
acpi0: X/RSDT: OemId <SUPERM,SMCI--MB,01072009>, AslId <AMI ,00010013>
mpacpi: PCI bus 2 int routing already done!
mpacpi: PCI bus 3 int routing already done!
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE811D2FA010 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE811D399010 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFFE811D2D9990 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (H_EC, PNP0C09-1)
acpiec0: unable to evaluate _GPE: AE_NOT_FOUND
TPMX (PNP0C01) at acpi0 not configured
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
LDR2 (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
CWDT (INT3F0D) at acpi0 not configured
SIO1 (PNP0C02) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
SPMI (IPI0001) at acpi0 not configured
PDRC (PNP0C02) at acpi0 not configured
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpibut1 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpifan0 at acpi0 (FAN0, PNP0C0B-0): ACPI Fan
acpifan1 at acpi0 (FAN1, PNP0C0B-1): ACPI Fan
acpifan2 at acpi0 (FAN2, PNP0C0B-2): ACPI Fan
acpifan3 at acpi0 (FAN3, PNP0C0B-3): ACPI Fan
acpifan4 at acpi0 (FAN4, PNP0C0B-4): ACPI Fan
acpitz0 at acpi0 (TZ00)
acpitz0: active cooling level 0: 84.0C
acpitz0: active cooling level 1: 55.0C
acpitz0: active cooling level 2: 50.0C
acpitz0: active cooling level 3: 45.0C
acpitz0: active cooling level 4: 40.0C
acpitz0: levels: critical 95.0 C
acpitz1 at acpi0 (TZ01): cpu0 cpu1 cpu2 cpu3 cpu4 cpu5 cpu6 cpu7
acpitz1: levels: critical 95.0 C, passive 98.0 C, passive cooling
ACPI: Enabled 7 GPEs in block 00 to 3F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-646)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150410/hwxface-646)
ipmi0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 8086 product 0c08 (rev. 0x06)
ppb0 at pci0 dev 1 function 0: vendor 8086 product 0c01 (rev. 0x06)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x8 @ 8.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci1 dev 0 function 0: Broadcom BCM5720 Gigabit Ethernet
bge0: APE firmware NCSI[_IP_XXX]
bge0: interrupting at msi0 vec 0
bge0: HW config 002b1094, 00006014, 0002aa38, 00000000 00000000
bge0: ASIC BCM5720 A0 (0x5720000), Ethernet address [_MAC_XXXXXXXXXX]
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5720C 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge1 at pci1 dev 0 function 1: Broadcom BCM5720 Gigabit Ethernet
bge1: APE firmware NCSI[_IP_XXX]
bge1: interrupting at msi1 vec 0
bge1: HW config 002b1094, 00006014, 0002aa38, 00000000 00000000
bge1: ASIC BCM5720 A0 (0x5720000), Ethernet address [_MAC_XXXXXXXXXX]
bge1: setting short Tx thresholds
brgphy1 at bge1 phy 2: BCM5720C 1000BASE-T media interface, rev. 0
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb1 at pci0 dev 1 function 1: vendor 8086 product 0c05 (rev. 0x06)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x8 @ 8.0GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci2 dev 0 function 0: vendor 8086 product 0329 (rev. 0x09)
ppb2: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci2 dev 0 function 2: vendor 8086 product 032a (rev. 0x09)
ppb3: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ehci0 at pci0 dev 26 function 0: vendor 8086 product 8c2d (rev. 0x05)
ehci0: interrupting at ioapic0 pin 16
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
ppb4 at pci0 dev 28 function 0: vendor 8086 product 8c10 (rev. 0xd5)
ppb4: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb4: link is x1 @ 2.5GT/s
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ppb5 at pci5 dev 0 function 0: vendor 1a03 product 1150 (rev. 0x03)
ppb5: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci6 dev 0 function 0: vendor 1a03 product 2000 (rev. 0x30)
wsdisplay0 at vga0 kbdmux 1
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
ppb6 at pci0 dev 28 function 1: vendor 8086 product 8c12 (rev. 0xd5)
ppb6: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb6: link is x1 @ 2.5GT/s
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci7 dev 0 function 0: I210-T1 Ethernet Server Adapter (rev. 0x03)
wm0: interrupting at ioapic0 pin 17
wm0: PCI-Express bus
wm0: 2048 words FLASH(HW)
wm0: Ethernet address [_MAC_XXXXXXXXXX]
wm0: Copper
ukphy0 at wm0 phy 1: OUI 0x000ac2, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb7 at pci0 dev 28 function 2: vendor 8086 product 8c14 (rev. 0xd5)
ppb7: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb7: link is x1 @ 2.5GT/s
pci8 at ppb7 bus 8
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
wm1 at pci8 dev 0 function 0: I210-T1 Ethernet Server Adapter (rev. 0x03)
wm1: interrupting at ioapic0 pin 18
wm1: PCI-Express bus
wm1: 2048 words FLASH(HW)
wm1: Ethernet address [_MAC_XXXXXXXXXX]
wm1: Copper
ukphy1 at wm1 phy 1: OUI 0x000ac2, model 0x0000, rev. 0
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb8 at pci0 dev 28 function 3: vendor 8086 product 8c16 (rev. 0xd5)
ppb8: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb8: link is x1 @ 2.5GT/s
pci9 at ppb8 bus 9
pci9: i/o space, memory space enabled, rd/line, wr/inv ok
ppb9 at pci9 dev 0 function 0: vendor 10b5 product 8111 (rev. 0x21)
ppb9: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge>
pci10 at ppb9 bus 10
pci10: i/o space, memory space enabled, rd/line, wr/inv ok
puc0 at pci10 dev 0 function 0: NetMos NM9835 Dual UART (com, com)
com2 at puc0 port 0 (16550-compatible): ioaddr 0xb050, interrupting at ioapic0 pin 19
com2: ns16550a, working fifo
com3 at puc0 port 1 (16550-compatible): ioaddr 0xb040, interrupting at ioapic0 pin 19
com3: ns16550a, working fifo
ppb10 at pci0 dev 28 function 4: vendor 8086 product 8c18 (rev. 0xd5)
ppb10: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
ppb10: link is x1 @ 2.5GT/s
pci11 at ppb10 bus 11
pci11: i/o space, memory space enabled, rd/line, wr/inv ok
bge2 at pci11 dev 0 function 0: Broadcom BCM5751 Gigabit Ethernet
bge2: interrupting at msi2 vec 0
bge2: HW config 00010055, 00000015, 00000030, 00000000 00000000
bge2: ASIC BCM5750 C1 (0x4201), Ethernet address [_MAC_XXXXXXXXXX]
bge2: setting short Tx thresholds
brgphy2 at bge2 phy 1: BCM5750 1000BASE-T media interface, rev. 0
brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ehci1 at pci0 dev 29 function 0: vendor 8086 product 8c26 (rev. 0x05)
ehci1: interrupting at ioapic0 pin 23
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
ichlpcib0 at pci0 dev 31 function 0: vendor 8086 product 8c52 (rev. 0x05)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0tco0: TCO timer reboot disabled by hardware; hope SMBIOS properly handles it.
: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
gpio0 at ichlpcib0: 64 pins
ahcisata0 at pci0 dev 31 function 2: vendor 8086 product 8c02 (rev. 0x05)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xc730ff45<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 4
atabus5 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: vendor 8086 product 8c22 (rev. 0x05)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
spdmem0 at iic0 addr 0x50: 9965413-002.A00LF
spdmem0: DDR3 SDRAM, ECC, temp-sensor, 4GB, 1333MHz (PC3-10666)
spdmem0: 12 rows, 13 cols, 8 log. banks, 2 phys. banks, 1.500ns cycle time
spdmem0: tAA-tRCD-tRP-tRAS: 8-8-8-24
spdmem0: 1.5V operable
spdmem1 at iic0 addr 0x51: 9965413-002.A00LF
spdmem1: DDR3 SDRAM, ECC, temp-sensor, 4GB, 1333MHz (PC3-10666)
spdmem1: 12 rows, 13 cols, 8 log. banks, 2 phys. banks, 1.500ns cycle time
spdmem1: tAA-tRCD-tRP-tRAS: 8-8-8-24
spdmem1: 1.5V operable
spdmem2 at iic0 addr 0x52: 9965413-002.A00LF
spdmem2: DDR3 SDRAM, ECC, temp-sensor, 4GB, 1333MHz (PC3-10666)
spdmem2: 12 rows, 13 cols, 8 log. banks, 2 phys. banks, 1.500ns cycle time
spdmem2: tAA-tRCD-tRP-tRAS: 8-8-8-24
spdmem2: 1.5V operable
spdmem3 at iic0 addr 0x53: 9965413-002.A00LF
spdmem3: DDR3 SDRAM, ECC, temp-sensor, 4GB, 1333MHz (PC3-10666)
spdmem3: 12 rows, 13 cols, 8 log. banks, 2 phys. banks, 1.500ns cycle time
spdmem3: tAA-tRCD-tRP-tRAS: 8-8-8-24
spdmem3: 1.5V operable
vendor 8086 product 8c24 (miscellaneous DASP, revision 0x05) at pci0 dev 31 function 6 not configured
isa0 at ichlpcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 148 us, pow 200 mW
acpicpu0: P0: FFH, lat 10 us, pow 25000 mW, 2001 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 25000 mW, 2000 MHz
acpicpu0: P2: FFH, lat 10 us, pow 23480 mW, 1900 MHz
acpicpu0: P3: FFH, lat 10 us, pow 21989 mW, 1800 MHz
acpicpu0: P4: FFH, lat 10 us, pow 20529 mW, 1700 MHz
acpicpu0: P5: FFH, lat 10 us, pow 19098 mW, 1600 MHz
acpicpu0: P6: FFH, lat 10 us, pow 17696 mW, 1500 MHz
acpicpu0: P7: FFH, lat 10 us, pow 16326 mW, 1400 MHz
acpicpu0: P8: FFH, lat 10 us, pow 14982 mW, 1300 MHz
acpicpu0: P9: FFH, lat 10 us, pow 13666 mW, 1200 MHz
acpicpu0: P10: FFH, lat 10 us, pow 12378 mW, 1100 MHz
acpicpu0: P11: FFH, lat 10 us, pow 11117 mW, 1000 MHz
acpicpu0: P12: FFH, lat 10 us, pow 9887 mW, 900 MHz
acpicpu0: P13: FFH, lat 10 us, pow 8682 mW, 800 MHz
acpicpu0: T0: FFH, lat 1 us, pow 8682 mW, 100 %
acpicpu0: T1: FFH, lat 1 us, pow 8139 mW, 94 %
acpicpu0: T2: FFH, lat 1 us, pow 7596 mW, 88 %
acpicpu0: T3: FFH, lat 1 us, pow 7054 mW, 82 %
acpicpu0: T4: FFH, lat 1 us, pow 6511 mW, 75 %
acpicpu0: T5: FFH, lat 1 us, pow 5968 mW, 69 %
acpicpu0: T6: FFH, lat 1 us, pow 5426 mW, 63 %
acpicpu0: T7: FFH, lat 1 us, pow 4883 mW, 57 %
acpicpu0: T8: FFH, lat 1 us, pow 4341 mW, 50 %
acpicpu0: T9: FFH, lat 1 us, pow 3798 mW, 44 %
acpicpu0: T10: FFH, lat 1 us, pow 3255 mW, 38 %
acpicpu0: T11: FFH, lat 1 us, pow 2713 mW, 32 %
acpicpu0: T12: FFH, lat 1 us, pow 2170 mW, 25 %
acpicpu0: T13: FFH, lat 1 us, pow 1627 mW, 19 %
acpicpu0: T14: FFH, lat 1 us, pow 1085 mW, 13 %
acpicpu0: T15: FFH, lat 1 us, pow 542 mW, 7 %
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution
acpicpu4 at cpu4: ACPI CPU
acpicpu5 at cpu5: ACPI CPU
acpicpu6 at cpu6: ACPI CPU
acpicpu7 at cpu7: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2000233280 Hz quality 3000
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 6.0Gb/s
ahcisata0 port 1: device present, speed: 6.0Gb/s
wd0 at atabus0 drive 0
wd0: <PLEXTOR PX-128M6Pro>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 119 GB, 248085 cyl, 16 head, 63 sec, 512 bytes/sect x 250069680 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus1 drive 0
wd1: <INTEL SSDSC2MH120A2>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
uhub2 at uhub0 port 1: vendor 8087 product 8008, class 9/0, rev 2.00/0.05, addr 2
uhub2: single transaction translator
uhub3 at uhub1 port 1: vendor 8087 product 8000, class 9/0, rev 2.00/0.05, addr 2
uhub3: single transaction translator
uhub2: 4 ports with 4 removable, self powered
uhub3: 6 ports with 6 removable, self powered
uhub4 at uhub3 port 3: vendor 0000 product 0001, class 9/0, rev 2.00/0.00, addr 3
uhub4: single transaction translator
uhub4: 4 ports with 3 removable, self powered
uhidev0 at uhub4 port 1 configuration 1 interface 0
uhidev0: vendor 0557 product 2419, rev 1.10/1.00, addr 4, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev1 at uhub4 port 1 configuration 1 interface 1
uhidev1: vendor 0557 product 2419, rev 1.10/1.00, addr 4, iclass 3/1
ums0 at uhidev1: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/7.99.17/modules
ipmi0: version 2.0 interface KCS iobase 0xca2/2 spacing 1
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)