Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2015-07-18 18:44:33
From: ajcc
Description: NetBSD/evbarm 7.0_RC1 on Raspberry Pi model B rev 1
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 7.0_RC1 (RPI.201507180020Z)
total memory = 240 MB
avail memory = 231 MB
sysctl_createv: sysctl_create(machine_arch) returned 17
kern.module.path=/stand/evbarm/7.0/modules
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root)
cpu0 at mainbus0 core 0: 700 MHz ARM1176JZ-S r0p7 (ARM11J V6ZK core)
cpu0: DC enabled IC enabled WB enabled LABT
cpu0: isar: [0]=0x140011 [1]=0x12002111 [2]=0x11231121 [3]=0x1102131, [4]=0x1141, [5]=0
cpu0: mmfr: [0]=0x1130003 [1]=0x10030302 [2]=0x1222100 [3]=0
cpu0: pfr: [0]=0x111 [1]=0x11
cpu0: 16KB/32B 4-way L1 VIPT Instruction cache
cpu0: 16KB/32B 4-way write-back-locking-C L1 VIPT Data cache
vfp0 at cpu0: VFP11, rounding, exceptions
vfp0: mvfr: [0]=0x11111111 [1]=0
obio0 at mainbus0
bcmicu0 at obio0
bcmmbox0 at obio0: VC mailbox
vcmbox0 at bcmmbox0
bcmtmr0 at obio0 intr 3: VC System Timer
vchiq0 at obio0 intr 66: BCM2835 VCHIQ
bcmpm0 at obio0: Power management, Reset and Watchdog controller
bcmdmac0 at obio0: DMA0 DMA2 DMA4 DMA5 DMA8 DMA9 DMA10
bcmrng0 at obio0: RNG
plcom0 at obio0 intr 57
plcom0: txfifo disabled
plcom0: console
genfb0 at obio0
genfb0: framebuffer at 0x4f676000, size 1280x720, depth 32, stride 5120
wsdisplay0 at genfb0 kbdmux 1
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 0-3 added (default, vt100 emulation)
sdhc0 at obio0 intr 62: SDHC controller
sdhc0: interrupting on intr 62
dwctwo0 at obio0 intr 9: USB controller
bcmspi0 at obio0 intr 54: SPI
spi0 at bcmspi0: SPI bus
bsciic0 at obio0 intr 53: BSC0
iic0 at bsciic0: I2C bus
bsciic1 at obio0 intr 53: BSC1
iic1 at bsciic1: I2C bus
bcmgpio0 at obio0: GPIO [0...31]
gpio0 at bcmgpio0: 32 pins
bcmgpio1 at obio0: GPIO [32...53]
gpio1 at bcmgpio1: 22 pins
usb0 at dwctwo0: USB revision 2.0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "bcmtmr0" frequency 1000000 Hz quality 100
sdhc0: SD Host Specification 3.0, rev.153
sdhc0: using DMA transfer
sdmmc0 at sdhc0 slot 0
uhub0 at usb0: vendor 0x0000 DWC2 root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
ld0 at sdmmc0: <0x03:0x5344:SD032:0x55:0x5002a4d6:0x03c>
ld0: 29888 KB, 59 cyl, 16 head, 63 sec, 512 bytes/sect x 59776 sectors
ld0: 4-bit width, bus clock 25.000 MHz
uhub1 at uhub0 port 1: vendor 0x0424 product 0x9512, class 9/0, rev 2.00/2.00, addr 2
uhub1: multiple transaction translators
uhub1: 3 ports with 2 removable, self powered
usmsc0 at uhub1 port 1
usmsc0: vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3
usmsc0: Ethernet address [_MAC_XXXXXXXXXX]
ukphy0 at usmsc0 phy 1: OUI 0x00800f, model 0x000c, rev. 3
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
umidi_search_quirk: v=2385, p=5633, i=0
umass0 at uhub1 port 2 configuration 1 interface 0
umass0: Kingston DataTraveler II+, rev 2.00/1.00, addr 4
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Kingston, DataTraveler II+, PMAP> disk removable
sd0: 1967 MB, 7868 cyl, 16 head, 32 sec, 512 bytes/sect x 4028416 sectors
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
vchiq: local ver 6 (min 3), remote ver 6.
vcaudio0 at vchiq0: auds
WARNING: no TOD clock present
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
audio0 at vcaudio0: half duplex, playback, capture, independent
warning: no /dev/console