Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-02-11 06:33:00
From: kagura1050
Description: NetBSD/i386 9.0_RC2 on EPoX EP-MVP3G-M
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 9.0_RC2 (GENERIC) #0: Fri Jan 31 12:19:17 UTC 2020 [ 1.000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC [ 1.000000] total memory = 511 MB [ 1.000000] avail memory = 482 MB [ 1.000000] WARNING: module error: module `cd9660' pushed by boot loader already exists [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] Kernelized RAIDframe activated [ 1.000000] running cgd selftest aes-xts-256 aes-xts-512 done [ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 [ 1.000003] VIA Technologies, Inc. VT82C597 ( ) [ 1.000003] mainbus0 (root) [ 1.000003] ACPI: RSDP 0x00000000000F6EF0 000014 (v00 AWARD ) [ 1.000003] ACPI: RSDT 0x000000001FFF3000 000028 (v01 AWARD AWRDACPI 30302E31 AWRD 00000000) [ 1.000003] ACPI: FACP 0x000000001FFF3040 000074 (v01 AWARD AWRDACPI 30302E31 AWRD 00000000) [ 1.000003] ACPI: DSDT 0x000000001FFF30C0 001DEF (v01 AWARD AWRDACPI 00001000 MSFT 0100000B) [ 1.000003] ACPI: FACS 0x000000001FFF0000 000040 [ 1.000003] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 1.000003] ACPI: BIOS is too old (19990714). Set acpi_force_load to use. [ 1.000003] ACPI Error: Could not remove SCI handler (20190405/evmisc-312) [ 1.000003] cpu0 at mainbus0 [ 1.000003] cpu0: AMD-K6(tm) 3D processor, id 0x58c [ 1.000003] cpu0: package 0, core 0, smt 0 [ 1.000003] pci0 at mainbus0 bus 0: configuration mode 1 [ 1.000003] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.000003] pchb0 at pci0 dev 0 function 0: vendor 1106 product 0597 (rev. 0x04) [ 1.000003] agp0 at pchb0: aperture at 0xe8000000, size 0x4000000 [ 1.000003] ppb0 at pci0 dev 1 function 0: vendor 1106 product 8598 (rev. 0x00) [ 1.000003] pci1 at ppb0 bus 1 [ 1.000003] pci1: i/o space, memory space enabled [ 1.000003] nouveau0 at pci1 dev 0 function 0: vendor 10de product 0322 (rev. 0xa1) [ 1.000003] pcib0 at pci0 dev 7 function 0: vendor 1106 product 0596 (rev. 0x06) [ 1.000003] viaide0 at pci0 dev 7 function 1 [ 1.000003] viaide0: VIA Technologies VT82C596A (Apollo Pro) ATA33 controller [ 1.000003] viaide0: bus-master DMA support present [ 1.000003] viaide0: primary channel configured to compatibility mode [ 1.000003] viaide0: primary channel interrupting at irq 14 [ 1.000003] atabus0 at viaide0 channel 0 [ 1.000003] viaide0: secondary channel configured to compatibility mode [ 1.000003] viaide0: secondary channel interrupting at irq 15 [ 1.000003] atabus1 at viaide0 channel 1 [ 1.000003] uhci0 at pci0 dev 7 function 2: vendor 1106 product 3038 (rev. 0x02) [ 1.000003] uhci0: interrupting at irq 10 [ 1.000003] usb0 at uhci0: USB revision 1.0 [ 1.000003] pchb1 at pci0 dev 7 function 3: vendor 1106 product 3050 (rev. 0x00) [ 1.000003] uhci1 at pci0 dev 11 function 0: vendor 1106 product 3038 (rev. 0x62) [ 1.000003] uhci1: interrupting at irq 12 [ 1.000003] usb1 at uhci1: USB revision 1.0 [ 1.000003] uhci2 at pci0 dev 11 function 1: vendor 1106 product 3038 (rev. 0x62) [ 1.000003] uhci2: interrupting at irq 11 [ 1.000003] usb2 at uhci2: USB revision 1.0 [ 1.000003] ehci0 at pci0 dev 11 function 2: vendor 1106 product 3104 (rev. 0x65) [ 1.000003] ehci0: interrupting at irq 5 [ 1.000003] ehci0: dropped intr workaround enabled [ 1.000003] ehci0: EHCI version 1.0 [ 1.000003] ehci0: 2 companion controllers, 2 ports each: uhci1 uhci2 [ 1.000003] usb3 at ehci0: USB revision 2.0 [ 1.000003] ex0 at pci0 dev 12 function 0: 3Com 3c905B-TX 10/100 Ethernet (rev. 0x30) [ 1.000003] ex0: interrupting at irq 9 [ 1.000003] ex0: MAC address [_MAC_XXXXXXXXXX] [ 1.000003] exphy0 at ex0 phy 24: 3Com internal media interface [ 1.000003] exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.000003] isa0 at pcib0 [ 1.000003] lpt0 at isa0 port 0x378-0x37b irq 7 [ 1.000003] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo [ 1.000003] com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo [ 1.000003] pckbc0 at isa0 port 0x60-0x64 [ 1.000003] attimer0 at isa0 port 0x40-0x43 [ 1.000003] pcppi0 at isa0 port 0x61 [ 1.000003] midi0 at pcppi0: PC speaker [ 1.000003] sysbeep0 at pcppi0 [ 1.000003] isapnp0 at isa0 port 0x279 [ 1.000003] fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2 [ 1.000003] attimer0: attached to pcppi0 [ 1.000003] isapnp0: read port 0x203 [ 1.000003] isapnp0: autoconfiguration error: No current device for tag, card 1 [ 1.000003] sb1 at isapnp0 port 0x220/16,0x300/2,0x388/4 irq 7 drq 0,5 [ 1.000003] sb1: Creative SB AWE64 PnP Audio: dsp v4.16 [ 1.000003] audio0 at sb1: playback, capture, half duplex, independent [ 1.000003] audio0: slinear_le:16 2ch 48000Hz, blk 40ms for playback [ 1.000003] audio0: slinear_le:16 2ch 48000Hz, blk 40ms for recording [ 1.000003] mpu0 at sb1 [ 1.000003] midi1 at mpu0: SB MPU-401 MIDI UART [ 1.000003] opl0 at sb1: model OPL3 [ 1.000003] midi2 at opl0: SB Yamaha OPL3 [ 1.000003] joy0 at isapnp0 port 0x200/8 [ 1.000003] joy0: Creative SB AWE64 PnP Game [ 1.000003] joy0: joystick not connected [ 1.000003] isapnp0: <Creative SB AWE64 PnP, CTL0022, , WaveTable> port 0x620/4 not configured [ 1.000003] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.123192] uhub0 at usb0: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.123192] uhub0: 2 ports with 2 removable, self powered [ 1.133370] uhub1 at usb1: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.133370] uhub1: 2 ports with 2 removable, self powered [ 1.133370] uhub2 at usb2: NetBSD (0000) UHCI root hub (0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.143802] uhub2: 2 ports with 2 removable, self powered [ 1.143802] uhub3 at usb3: NetBSD (0000) EHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.143802] uhub3: 4 ports with 4 removable, self powered [ 1.153178] atapibus0 at atabus0: 2 targets [ 1.173185] cd0 at atapibus0 drive 1: <PIONEER DVD-RW DVR-109, EBTO041897WL, 8.58> cdrom removable [ 1.193769] cd0: 32-bit data port [ 1.193769] IPsec: Initialized Security Association Processing. [ 1.193769] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66) [ 1.253196] wd0 at atabus0 drive 0 [ 1.253196] wd0: <WDC WD2500BB-55RDA0> [ 1.253196] wd0: drive supports 16-sector PIO transfers, LBA48 addressing [ 1.253196] wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors [ 1.313156] wd0: 32-bit data port [ 1.313156] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) [ 1.313156] wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) [ 1.313156] cd0(viaide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA) [ 3.393170] uhub4 at uhub3 port 4: vendor 05e3 (0x5e3) USB2.0 Hub (0x608), class 9/0, rev 2.00/9.01, addr 2 [ 3.403401] uhub4: single transaction translator [ 3.403401] uhub4: 4 ports with 4 removable, self powered [ 3.613184] uhub5 at uhub0 port 1: vendor 05e3 (0x5e3) USB2.0 Hub (0x608), class 9/0, rev 2.00/32.98, addr 2 [ 3.643188] uhub5: 4 ports with 4 removable, self powered [ 4.733240] umass0 at uhub4 port 3 configuration 1 interface 0 [ 4.733240] umass0: TOSHIBA (0x930) TransMemory (0x6544), rev 2.00/1.00, addr 3 [ 4.743777] umass0: using SCSI over Bulk-Only [ 4.743777] scsibus0 at umass0: 2 targets, 1 lun per target [ 4.763213] sd0 at scsibus0 target 0 lun 0: <TOSHIBA, TransMemory, 1.00> disk removable [ 4.773214] sd0: fabricating a geometry [ 4.773214] sd0: 14782 MB, 14782 cyl, 64 head, 32 sec, 512 bytes/sect x 30274560 sectors [ 4.783211] sd0: fabricating a geometry [ 5.053209] uhidev0 at uhub5 port 4 configuration 1 interface 0 [ 5.063255] uhidev0: SEM (0x1a2c) USB Keyboard (0xe24), rev 1.10/1.10, addr 3, iclass 3/1 [ 5.083261] ukbd0 at uhidev0 [ 5.493205] wskbd0 at ukbd0: console keyboard [ 5.493205] uhidev1 at uhub5 port 4 configuration 1 interface 1 [ 5.493205] uhidev1: SEM (0x1a2c) USB Keyboard (0xe24), rev 1.10/1.10, addr 3, iclass 3/0 [ 5.523216] uhidev1: 2 report ids [ 5.523216] uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0 [ 5.523216] uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0 [ 5.603240] WARNING: 1 error while detecting hardware; check system log. [ 5.603240] boot device: cd0 [ 6.083224] root on cd0a dumps on cd0b [ 6.313207] root file system type: cd9660 [ 6.443285] kern.module.path=/stand/i386/9.0/modules [ 6.443285] nouveau0: info: NVIDIA NV34 (034200a2) [ 6.603233] nouveau0: info: bios: version[_IP_XXXXXX].00 [ 6.613295] nouveau0: notice: tmr: unknown input clock freq [ 6.613295] nouveau0: info: fb: 128 MiB DDR1 [ 6.643224] Zone kernel: Available graphics memory: 32802 kiB [ 6.673220] nouveau0: info: DRM: VRAM: 127 MiB [ 6.673220] nouveau0: info: DRM: GART: 128 MiB [ 6.673220] nouveau0: info: DRM: BMP version 5.39 [ 6.683849] nouveau0: info: DRM: DCB version 2.2 [ 6.683849] nouveau0: info: DRM: DCB outp 00: 01000300 000088b8 [ 6.683849] nouveau0: info: DRM: DCB outp 01: 02010310 000088b8 [ 6.683849] nouveau0: info: DRM: DCB outp 02: 01010312 00000000 [ 6.683849] nouveau0: info: DRM: DCB outp 03: 02020321 00000003 [ 6.683849] nouveau0: info: DRM: Loading NV17 power sequencing microcode [ 6.713239] nouveau0: info: DRM: Saving VGA fonts [ 7.013289] kern info: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 7.023517] kern info: [drm] Driver supports precise vblank timestamp query. [ 7.023517] nouveau0: info: DRM: 0xB275: Parsing digital output script table [ 7.053284] nouveau0: info: DRM: MM: using M2MF for buffer copies [ 7.053284] nouveau0: info: DRM: Setting dpms mode 3 on TV encoder (output 3) [ 8.123247] nouveaufb0 at nouveau0 [ 8.123247] nouveaufb0: framebuffer at 0xda30b000, size 1600x900, depth 32, stride 6400 [ 12.483318] wsdisplay0 at nouveaufb0 kbdmux 1: console (default, vt100 emulation), using wskbd0 [ 12.577562] wsmux1: connecting to wsdisplay0