Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-02-14 19:04:02
From: johnklos
Description: AlphaServer DS25
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 9.0 (ATHENA-$Revision: 9.0p $) #0: Fri Feb 14 18:13:06 UTC 2020 [ 1.000000] [_EMAIL_XXXXXXXXX]:/home/obj-alpha/sys/arch/alpha/compile/ATHENA [ 1.000000] AlphaServer DS25, 1000MHz, s/n 4239KW51A0 [ 1.000000] 8192 byte page size, 2 processors. [ 1.000000] total memory = 12288 MB [ 1.000000] (7352 KB reserved for PROM, 12280 MB used by NetBSD) [ 1.000000] avail memory = 12103 MB [ 1.000000] timecounter: Timecounters tick every 0.976 msec [ 1.000000] Kernelized RAIDframe activated [ 1.000000] running cgd selftest aes-xts-256 aes-xts-512 done [ 1.000000] WARNING: module error: built-in module sequencer can't find builtin dependency `midi' [ 1.000000] WARNING: module error: built-in module sequencer prerequisite midi failed, error 2 [ 1.000000] mainbus0 (root) [ 1.000000] cpu0 at mainbus0: ID 0 (primary), 21264C-6 [ 1.000000] cpu0: Architecture extensions: 0x1307<PAT,MVI,CIX,FIX,BWX> [ 1.000000] cpu1 at mainbus0: ID 1, 21264C-6 [ 1.000000] cpu1: processor off-line; multiprocessor support not present in kernel [ 1.000000] tsc0 at mainbus0: 21274 Core Logic Chipset, Cchip rev 0 [ 1.000000] tsc0: 8 Dchips, 2 memory buses of 32 bytes [ 1.000000] tsc0: arrays present: 4096MB (split), 2048MB, 4096MB (split), 2048MB, Dchip 0 rev 1 [ 1.000000] tsp0 at tsc0 [ 1.000000] pci0 at tsp0 bus 0 [ 1.000000] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.000000] sio0 at pci0 dev 7 function 0: vendor 10b9 product 1533 (rev. 0xc3) [ 1.000000] fxp0 at pci0 dev 8 function 0: Intel i82559ER Ethernet (rev. 0x09) [ 1.000000] fxp0: interrupting at dec 6600 irq 20 [ 1.000000] fxp0: May need receiver lock-up workaround [ 1.000000] fxp0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.000000] inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4 [ 1.000000] inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.000000] vendor 0e11 product a0f7 (PCI Hot-Plug system, revision 0x12) at pci0 dev 12 function 0 not configured [ 1.000000] aceride0 at pci0 dev 16 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc1) [ 1.000000] aceride0: bus-master DMA support present [ 1.000000] aceride0: using PIO transfers above 137GB as workaround for 48bit DMA access bug, expect reduced performance [ 1.000000] aceride0: primary channel configured to compatibility mode [ 1.000000] aceride0: primary channel interrupting at isa irq 14 [ 1.000000] atabus0 at aceride0 channel 0 [ 1.000000] aceride0: secondary channel configured to compatibility mode [ 1.000000] aceride0: secondary channel interrupting at isa irq 15 [ 1.000000] atabus1 at aceride0 channel 1 [ 1.000000] isa0 at sio0 [ 1.000000] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo [ 1.000000] com0: console [ 1.000000] com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo [ 1.000000] pckbc0 at isa0 port 0x60-0x64 [ 1.000000] attimer0 at isa0 port 0x40-0x43 [ 1.000000] pcppi0 at isa0 port 0x61 [ 1.000000] isabeep0 at pcppi0 [ 1.000000] mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock [ 1.000000] attimer0: attached to pcppi0 [ 1.000000] tsp1 at tsc0 [ 1.000000] pci1 at tsp1 bus 0 [ 1.000000] pci1: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.000000] ahc0 at pci1 dev 1 function 0: Adaptec aic7899 Ultra160 SCSI adapter [ 1.000000] ahc0: interrupting at dec 6600 irq 0 [ 1.000000] ahc0: aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs [ 1.000000] scsibus0 at ahc0: 16 targets, 8 luns per target [ 1.000000] ahc1 at pci1 dev 1 function 1: Adaptec aic7899 Ultra160 SCSI adapter [ 1.000000] ahc1: interrupting at dec 6600 irq 1 [ 1.000000] ahc1: aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs [ 1.000000] scsibus1 at ahc1: 16 targets, 8 luns per target [ 1.000000] bge0 at pci1 dev 5 function 0: Broadcom BCM5703X Gigabit Ethernet [ 1.000000] bge0: interrupting at dec 6600 irq 4 [ 1.000000] bge0: HW config 00000014, 00000000, 00000000, 00000000 00000000 [ 1.000000] bge0: ASIC BCM5702/5703 A2 (0x1002), Ethernet address [_MAC_XXXXXXXXXX] [ 1.000000] brgphy0 at bge0 phy 1: BCM5703 1000BASE-T media interface, rev. 2 [ 1.000000] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.000000] tsp2 at tsc0 [ 1.000000] pci2 at tsp2 bus 0 [ 1.000000] pci2: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.000000] bge1 at pci2 dev 2 function 0: Broadcom BCM5703 Gigabit Ethernet [ 1.000000] bge1: interrupting at dec 6600 irq 32 [ 1.000000] bge1: HW config 00010055, 00000015, 00000000, 00000000 00000000 [ 1.000000] bge1: ASIC BCM5702/5703 B0 (0x1100), Ethernet address [_MAC_XXXXXXXXXX] [ 1.000000] brgphy1 at bge1 phy 1: BCM5703 1000BASE-T media interface, rev. 3 [ 1.000000] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.000000] tsp3 at tsc0 [ 1.000000] pci3 at tsp3 bus 0 [ 1.000000] pci3: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.000000] siisata0 at pci3 dev 1 function 0: vendor 1095 product 3124 (rev. 0x01) [ 1.000000] siisata0: interrupting at dec 6600 irq 36 [ 1.000000] siisata0: SiI3124, 3.0Gb/s [ 1.000000] siisata0: 64-bit 66MHz PCI [ 1.000000] atabus2 at siisata0 channel 0 [ 1.000000] atabus3 at siisata0 channel 1 [ 1.000000] atabus4 at siisata0 channel 2 [ 1.000000] atabus5 at siisata0 channel 3 [ 1.000000] vendor 0e11 product a0f7 (PCI Hot-Plug system, revision 0x12) at pci3 dev 6 function 0 not configured [ 1.000000] tsciic0 at tsc0 [ 1.000000] iic0 at tsciic0: I2C bus [ 1.000000] timecounter: Timecounter "clockinterrupt" frequency 1024 Hz quality 0 [ 1.000003] timecounter: Timecounter "PCC" frequency 999939200 Hz quality 1000 [ 1.252100] scsibus0: waiting 2 seconds for devices to settle... [ 1.322724] scsibus1: waiting 2 seconds for devices to settle... [ 1.443508] WARNING: module error: built-in module sequencer can't find builtin dependency `midi' [ 1.547691] WARNING: module error: built-in module sequencer prerequisite midi failed, error 2 [ 1.700342] siisata0 port 0: device present, speed: 3.0Gb/s [ 1.764969] siisata0 port 1: device present, speed: 3.0Gb/s [ 1.831532] siisata0 port 2: device present, speed: 3.0Gb/s [ 1.898099] siisata0 port 3: device present, speed: 3.0Gb/s [ 1.970849] wd0 at atabus2 drive 0 [ 2.010888] wd0: <Samsung SSD 850 EVO 500GB> [ 2.060452] wd0: drive supports 1-sector PIO transfers, LBA48 addressing [ 2.060452] wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors [ 2.159327] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) [ 2.159327] wd0(siisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (30 tags) [ 2.159327] wd1 at atabus3 drive 0 [ 2.199365] wd1: <Samsung SSD 850 EVO 500GB> [ 2.249537] wd1: drive supports 1-sector PIO transfers, LBA48 addressing [ 2.249537] wd1: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors [ 2.347802] wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) [ 2.348780] wd1(siisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (30 tags) [ 2.348780] wd2 at atabus4 drive 0 [ 2.393700] wd2: <ST4000LM024-2AN17V> [ 2.435816] wd2: drive supports 1-sector PIO transfers, LBA48 addressing [ 2.435816] wd2: 3726 GB, 7752021 cyl, 16 head, 63 sec, 512 bytes/sect x 7814037168 sectors [ 2.705224] wd2: GPT GUID: 83b4b07c-f626-46e1-a863-18ee8d57f003 [ 2.705224] dk0 at wd2: "bsdhome0", 7814035456 blocks at 1024, type: raidframe [ 3.043114] wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) [ 3.043114] wd2(siisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (30 tags) [ 3.043114] wd3 at atabus5 drive 0 [ 3.083153] wd3: <ST4000LM024-2AN17V> [ 3.125907] wd3: drive supports 1-sector PIO transfers, LBA48 addressing [ 3.125907] wd3: 3726 GB, 7752021 cyl, 16 head, 63 sec, 512 bytes/sect x 7814037168 sectors [ 3.720341] wd3: GPT GUID: 6ad701e1-bd01-488c-ace3-b63c346f3ca9 [ 3.721448] dk1 at wd3: "4tb_b", 7814035456 blocks at 1024, type: raidframe [ 4.932868] wd3: drive supports PIO mode 3, DMA mode 1, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) [ 4.932868] wd3(siisata0:3:0): using PIO mode 3, DMA mode 1, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (30 tags) [ 5.050236] sd0 at scsibus0 target 0 lun 0: <COMPAQ, BD0726536C, 3B02> disk fixed [ 5.141056] sd0: 69464 MB, 28004 cyl, 20 head, 254 sec, 512 bytes/sect x 142264000 sectors [ 5.258244] sd0: sync (25.00ns offset 63), 16-bit (80.000MB/s) transfers, tagged queueing [ 13.331477] raid1: RAID Level 1 [ 13.367091] raid1: Components: /dev/dk0 /dev/dk1 [ 13.422215] raid1: Total Sectors: 7814035328 (3815446 MB) [ 13.586360] raid1: GPT GUID: 13705852-89ff-4695-a9b2-3fcddc8304fc [ 13.589290] dk2 at raid1: "bsdhome", 7814033408 blocks at 1024, type: ffs [ 13.674250] raid0: RAID Level 1 [ 13.710630] raid0: Components: /dev/wd1a /dev/wd0a [ 13.767833] raid0: Total Sectors: 943218560 (460555 MB) [ 13.834406] root on raid0a dumps on raid0b [ 13.883237] kern.module.path=/stand/alpha/9.0/modules [ 15.453546] JIT compilation is postponed until after bpfjit module is loaded [ 40.862698] Accounting started