Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2020-02-15 00:40:44
From: johnklos
Description: AMD Ryzen 2600
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, [ 1.000000] 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, [ 1.000000] 2018, 2019, 2020 The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 9.0 (DAISY-$Revision: 9.0p $) #0: Fri Feb 14 21:53:31 UTC 2020 [ 1.000000] [_EMAIL_XXXXXXXX]:/usr/obj-amd64/sys/arch/amd64/compile/DAISY [ 1.000000] total memory = 65467 MB [ 1.000000] avail memory = 63540 MB [ 1.000000] cpu_rng: RDSEED [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] Kernelized RAIDframe activated [ 1.000000] running cgd selftest aes-xts-256 aes-xts-512 done [ 1.000000] [ 365.000000] nouveau* disabled [ 1.000000] [ 365.000000] nouveau* already disabled [ 1.000000] timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 [ 1.000003] efi: systbl at pa dcd2f018 [ 1.000003] To Be Filled By O.E.M. To Be Filled By O.E.M. (To Be Filled By O.E.M.) [ 1.000003] mainbus0 (root) [ 1.000003] ACPI: RSDP 0x00000000DC20A000 000024 (v02 ALASKA) [ 1.000003] ACPI: XSDT 0x00000000DC20A0A0 0000BC (v01 ALASKA A M I 01072009 AMI 00010013) [ 1.000003] ACPI: FACP 0x00000000DC210DE0 000114 (v06 ALASKA A M I 01072009 AMI 00010013) [ 1.000003] ACPI: DSDT 0x00000000DC20A1F0 006BEB (v02 ALASKA A M I 01072009 INTL 20120913) [ 1.000003] ACPI: FACS 0x00000000DC276E00 000040 [ 1.000003] ACPI: APIC 0x00000000DC210EF8 00015E (v03 ALASKA A M I 01072009 AMI 00010013) [ 1.000003] ACPI: FPDT 0x00000000DC211058 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 1.000003] ACPI: FIDT 0x00000000DC2110A0 00009C (v01 ALASKA A M I 01072009 AMI 00010013) [ 1.000003] ACPI: SSDT 0x00000000DC211140 0000C8 (v02 ALASKA CPUSSDT 01072009 AMI 01072009) [ 1.000003] ACPI: SSDT 0x00000000DC211208 008C98 (v02 AMD AMD ALIB 00000002 MSFT 04000000) [ 1.000003] ACPI: SSDT 0x00000000DC219EA0 003071 (v01 AMD AMD AOD 00000001 INTL 20120913) [ 1.000003] ACPI: MCFG 0x00000000DC21CF18 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 1.000003] ACPI: AAFT 0x00000000DC21CF58 000430 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 1.000003] ACPI: HPET 0x00000000DC21D388 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 1.000003] ACPI: SSDT 0x00000000DC21D3C0 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913) [ 1.000003] ACPI: UEFI 0x00000000DC21D3E8 000042 (v01 ALASKA A M I 00000002 01000013) [ 1.000003] ACPI: IVRS 0x00000000DC21D430 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000) [ 1.000003] ACPI: SSDT 0x00000000DC21D500 001A58 (v01 AMD AMD CPU 00000001 AMD 00000001) [ 1.000003] ACPI: CRAT 0x00000000DC21EF58 000BD0 (v01 AMD AMD CRAT 00000001 AMD 00000001) [ 1.000003] ACPI: CDIT 0x00000000DC21FB28 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001) [ 1.000003] ACPI: SSDT 0x00000000DC21FB58 001D4A (v01 AMD AmdTable 00000001 INTL 20120913) [ 1.000003] ACPI: SSDT 0x00000000DC2218A8 0000BF (v01 AMD AMD PT 00001000 INTL 20120913) [ 1.000003] ACPI: WSMT 0x00000000DC221968 000028 (v01 ALASKA A M I 01072009 AMI 00010013) [ 1.000003] ACPI: 8 ACPI AML tables successfully acquired and loaded [ 1.000003] ioapic0 at mainbus0 apid 13: pa 0xfec00000, version 0x21, 24 pins [ 1.000003] ioapic1 at mainbus0 apid 14: pa 0xfec01000, version 0x21, 32 pins [ 1.000003] cpu0 at mainbus0 apid 0 [ 1.000003] cpu0: AMD Ryzen 5 2600 Six-Core Processor , id 0x800f82 [ 1.000003] cpu0: package 0, core 0, smt 0 [ 1.000003] cpu1 at mainbus0 apid 2 [ 1.000003] cpu1: AMD Ryzen 5 2600 Six-Core Processor , id 0x800f82 [ 1.000003] cpu1: package 0, core 1, smt 0 [ 1.000003] cpu2 at mainbus0 apid 4 [ 1.000003] cpu2: AMD Ryzen 5 2600 Six-Core Processor , id 0x800f82 [ 1.000003] cpu2: package 0, core 2, smt 0 [ 1.000003] cpu3 at mainbus0 apid 8 [ 1.000003] cpu3: AMD Ryzen 5 2600 Six-Core Processor , id 0x800f82 [ 1.000003] cpu3: package 0, core 4, smt 0 [ 1.000003] cpu4 at mainbus0 apid 10 [ 1.000003] cpu4: AMD Ryzen 5 2600 Six-Core Processor , id 0x800f82 [ 1.000003] cpu4: package 0, core 5, smt 0 [ 1.000003] cpu5 at mainbus0 apid 12 [ 1.000003] cpu5: AMD Ryzen 5 2600 Six-Core Processor , id 0x800f82 [ 1.000003] cpu5: package 0, core 6, smt 0 [ 1.000003] cpu6 at mainbus0 apid 1 [ 1.000003] cpu6: AMD Ryzen 5 2600 Six-Core Processor , id 0x800f82 [ 1.000003] cpu6: package 0, core 0, smt 1 [ 1.000003] cpu7 at mainbus0 apid 3 [ 1.000003] cpu7: AMD Ryzen 5 2600 Six-Core Processor , id 0x800f82 [ 1.000003] cpu7: package 0, core 1, smt 1 [ 1.000003] cpu8 at mainbus0 apid 5 [ 1.000003] cpu8: AMD Ryzen 5 2600 Six-Core Processor , id 0x800f82 [ 1.000003] cpu8: package 0, core 2, smt 1 [ 1.000003] cpu9 at mainbus0 apid 9 [ 1.000003] cpu9: AMD Ryzen 5 2600 Six-Core Processor , id 0x800f82 [ 1.000003] cpu9: package 0, core 4, smt 1 [ 1.000003] cpu10 at mainbus0 apid 11 [ 1.000003] cpu10: AMD Ryzen 5 2600 Six-Core Processor , id 0x800f82 [ 1.000003] cpu10: package 0, core 5, smt 1 [ 1.000003] cpu11 at mainbus0 apid 13 [ 1.000003] cpu11: AMD Ryzen 5 2600 Six-Core Processor , id 0x800f82 [ 1.000003] cpu11: package 0, core 6, smt 1 [ 1.000003] acpi0 at mainbus0: Intel ACPICA 20190405 [ 1.000003] acpi0: X/RSDT: OemId <ALASKA, A M I ,01072009>, AslId <AMI ,00010013> [ 1.000003] acpi0: autoconfiguration error: invalid PCI address for D012 [ 1.000003] acpi0: autoconfiguration error: invalid PCI address for D03F [ 1.000003] acpi0: autoconfiguration error: invalid PCI address for D040 [ 1.000003] acpi0: autoconfiguration error: invalid PCI address for D041 [ 1.000003] acpi0: autoconfiguration error: invalid PCI address for D042 [ 1.000003] acpi0: MCFG: segment 0, bus 0-63, address 0x00000000f8000000 [ 1.000003] acpi0: SCI interrupting at int 9 [ 1.000003] acpi0: fixed power button present [ 1.000003] timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 [ 1.031028] hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) [ 1.031028] timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000 [ 1.038584] AMDN (PNP0C01) at acpi0 not configured [ 1.038584] IOMA (PNP0C02) at acpi0 not configured [ 1.038584] APSP (PNP0C02) at acpi0 not configured [ 1.038584] attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0 [ 1.038584] pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 [ 1.038584] spkr0 at pcppi1: PC Speaker [ 1.038584] wsbell at spkr0 not configured [ 1.038584] midi0 at pcppi1: PC speaker [ 1.038584] sysbeep0 at pcppi1 [ 1.038584] SIO1 (PNP0C02) at acpi0 not configured [ 1.038584] UAR1 (PNP0501) at acpi0 not configured [ 1.038584] S900 (PNP0C02) at acpi0 not configured [ 1.038584] acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button [ 1.038584] GPIO (AMDI0030) at acpi0 not configured [ 1.038584] AWR0 (PNP0C02) at acpi0 not configured [ 1.038584] ABR0 (PNP0C02) at acpi0 not configured [ 1.038584] ABR1 (PNP0C02) at acpi0 not configured [ 1.038584] ABR2 (PNP0C02) at acpi0 not configured [ 1.038584] ABR3 (PNP0C02) at acpi0 not configured [ 1.038584] ABR4 (PNP0C02) at acpi0 not configured [ 1.038584] ABR5 (PNP0C02) at acpi0 not configured [ 1.038584] ABR6 (PNP0C02) at acpi0 not configured [ 1.038584] ABR7 (PNP0C02) at acpi0 not configured [ 1.038584] AWR1 (PNP0C02) at acpi0 not configured [ 1.038584] ABR8 (PNP0C02) at acpi0 not configured [ 1.038584] ABR9 (PNP0C02) at acpi0 not configured [ 1.038584] ABRA (PNP0C02) at acpi0 not configured [ 1.038584] ABRB (PNP0C02) at acpi0 not configured [ 1.038584] ABRC (PNP0C02) at acpi0 not configured [ 1.038584] ABRD (PNP0C02) at acpi0 not configured [ 1.038584] ABRE (PNP0C02) at acpi0 not configured [ 1.038584] ABRF (PNP0C02) at acpi0 not configured [ 1.038584] PTIO (AMDIF030) at acpi0 not configured [ 1.038584] acpiwmi0 at acpi0 (AOD, PNP0C14-AOD): ACPI WMI Interface [ 1.038584] acpiwmibus at acpiwmi0 not configured [ 1.038584] attimer1: attached to pcppi1 [ 1.038584] pci0 at mainbus0 bus 0: configuration mode 1 [ 1.038584] pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok [ 1.038584] amdsmn0 at pci0 dev 0 function 0: AMD Family 17h System Management Network [ 1.038584] amdzentemp0 at amdsmn0: AMD CPU Temperature Sensors (Family17h) [ 1.038584] vendor 1022 product 1451 (IOMMU system) at pci0 dev 0 function 2 not configured [ 1.038584] pchb0 at pci0 dev 1 function 0: vendor 1022 product 1452 (rev. 0x00) [ 1.038584] ppb0 at pci0 dev 1 function 3: vendor 1022 product 1453 (rev. 0x00) [ 1.038584] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 8.0GT/s [ 1.038584] pci1 at ppb0 bus 1 [ 1.038584] pci1: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.038584] xhci0 at pci1 dev 0 function 0: vendor 1022 product 43b9 (rev. 0x02) [ 1.038584] xhci0: interrupting at msix0 vec 0 [ 1.038584] xhci0: xHCI version 1.10 [ 1.038584] usb0 at xhci0: USB revision 3.1 [ 1.038584] usb1 at xhci0: USB revision 2.0 [ 1.038584] ahcisata0 at pci1 dev 0 function 1: vendor 1022 product 43b5 (rev. 0x02) [ 1.038584] ahcisata0: 64-bit DMA [ 1.038584] ahcisata0: AHCI revision 1.31, 8 ports, 32 slots, CAP 0xef36ff27<SXS,PSC,SSC,PMD,SPM,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SSS,SSNTF,SNCQ,S64A> [ 1.038584] ahcisata0: interrupting at msi1 vec 0 [ 1.038584] atabus0 at ahcisata0 channel 0 [ 1.038584] atabus1 at ahcisata0 channel 1 [ 1.038584] atabus2 at ahcisata0 channel 2 [ 1.038584] atabus3 at ahcisata0 channel 3 [ 1.038584] atabus4 at ahcisata0 channel 4 [ 1.038584] atabus5 at ahcisata0 channel 5 [ 1.038584] atabus6 at ahcisata0 channel 6 [ 1.038584] atabus7 at ahcisata0 channel 7 [ 1.038584] ppb1 at pci1 dev 0 function 2: vendor 1022 product 43b0 (rev. 0x02) [ 1.038584] ppb1: PCI Express capability version 2 <Upstream Port of PCI-E Switch> [ 1.038584] pci2 at ppb1 bus 2 [ 1.038584] pci2: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.038584] ppb2 at pci2 dev 0 function 0: vendor 1022 product 43b4 (rev. 0x02) [ 1.038584] ppb2: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s [ 1.038584] pci3 at ppb2 bus 3 [ 1.038584] pci3: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.038584] bge0 at pci3 dev 0 function 0: Broadcom BCM5720 Gigabit Ethernet [ 1.038584] bge0: APE firmware NCSI[_IP_XXX] [ 1.038584] bge0: interrupting at msix2 vec 0 [ 1.038584] bge0: HW config 002b1094, 00006014, 0012aa38, 00000000 00000000 [ 1.038584] bge0: ASIC BCM5720 A0 (0x5720000), Ethernet address [_MAC_XXXXXXXXXX] [ 1.038584] bge0: setting short Tx thresholds [ 1.038584] brgphy0 at bge0 phy 1: BCM5720C 1000BASE-T media interface, rev. 0 [ 1.038584] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.038584] bge1 at pci3 dev 0 function 1: Broadcom BCM5720 Gigabit Ethernet [ 1.038584] bge1: APE firmware NCSI[_IP_XXX] [ 1.038584] bge1: interrupting at msix3 vec 0 [ 1.038584] bge1: HW config 002b1094, 00006014, 0012aa38, 00000000 00000000 [ 1.038584] bge1: ASIC BCM5720 A0 (0x5720000), Ethernet address [_MAC_XXXXXXXXXX] [ 1.038584] bge1: setting short Tx thresholds [ 1.038584] brgphy1 at bge1 phy 2: BCM5720C 1000BASE-T media interface, rev. 0 [ 1.038584] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.038584] ppb3 at pci2 dev 1 function 0: vendor 1022 product 43b4 (rev. 0x02) [ 1.038584] ppb3: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s [ 1.038584] ppb3: link is x1 @ 2.5GT/s [ 1.038584] pci4 at ppb3 bus 4 [ 1.038584] pci4: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.038584] re0 at pci4 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x11) [ 1.038584] re0: interrupting at msix4 vec 0 [ 1.038584] re0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.038584] re0: using 256 tx descriptors [ 1.038584] rgephy0 at re0 phy 7: RTL8251 1000BASE-T media interface, rev. 0 [ 1.038584] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto [ 1.038584] ppb4 at pci2 dev 2 function 0: vendor 1022 product 43b4 (rev. 0x02) [ 1.038584] ppb4: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s [ 1.038584] pci5 at ppb4 bus 5 [ 1.038584] pci5: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.038584] ppb5 at pci2 dev 3 function 0: vendor 1022 product 43b4 (rev. 0x02) [ 1.038584] ppb5: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x1 @ 5.0GT/s [ 1.038584] pci6 at ppb5 bus 6 [ 1.038584] pci6: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.038584] ppb6 at pci2 dev 4 function 0: vendor 1022 product 43b4 (rev. 0x02) [ 1.038584] ppb6: PCI Express capability version 2 <Downstream Port of PCI-E Switch> x4 @ 5.0GT/s [ 1.038584] pci7 at ppb6 bus 7 [ 1.038584] pci7: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.038584] genfb0 at pci7 dev 0 function 0: vendor 10de product 128b (rev. 0xa1) [ 1.038584] genfb0: framebuffer at 0xf1000000, size 800x600, depth 32, stride 3200 [ 1.038584] genfb0: shadow framebuffer enabled, size 1875 KB [ 1.038584] wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation) [ 1.038584] wsmux1: connecting to wsdisplay0 [ 1.038584] drm at genfb0 not configured [ 1.038584] hdaudio0 at pci7 dev 0 function 1: HD Audio Controller [ 1.038584] hdaudio0: interrupting at msi5 vec 0 [ 1.038584] hdafg0 at hdaudio0: vendor 10de product 0051 [ 1.038584] hdafg0: DP00 8ch: Digital Out [Jack] [ 1.038584] hdafg0: DP01 8ch: Digital Out [Jack] [ 1.038584] hdafg0: 8ch/0ch 48000Hz PCM16* [ 1.038584] pchb1 at pci0 dev 2 function 0: vendor 1022 product 1452 (rev. 0x00) [ 1.038584] pchb2 at pci0 dev 3 function 0: vendor 1022 product 1452 (rev. 0x00) [ 1.038584] ppb7 at pci0 dev 3 function 1: vendor 1022 product 1453 (rev. 0x00) [ 1.038584] ppb7: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s [ 1.038584] ppb7: link is x8 @ 5.0GT/s [ 1.038584] pci8 at ppb7 bus 8 [ 1.038584] pci8: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.038584] mfii0 at pci8 dev 0 function 0: "ServeRAID M5016", firmware 23.34.0-0019, 1024MB cache [ 1.038584] mfii0: interrupting at ioapic1 pin 30 [ 1.038584] scsibus0 at mfii0: 64 targets, 8 luns per target [ 1.038584] pchb3 at pci0 dev 4 function 0: vendor 1022 product 1452 (rev. 0x00) [ 1.038584] pchb4 at pci0 dev 7 function 0: vendor 1022 product 1452 (rev. 0x00) [ 1.038584] ppb8 at pci0 dev 7 function 1: vendor 1022 product 1454 (rev. 0x00) [ 1.038584] ppb8: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s [ 1.038584] pci9 at ppb8 bus 9 [ 1.038584] pci9: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.038584] vendor 1022 product 145a (non-essential instrumentation, subclass 0x00) at pci9 dev 0 function 0 not configured [ 1.038584] vendor 1022 product 1456 (miscellaneous crypto) at pci9 dev 0 function 2 not configured [ 1.038584] xhci1 at pci9 dev 0 function 3: vendor 1022 product 145f (rev. 0x00) [ 1.038584] xhci1: interrupting at msix6 vec 0 [ 1.038584] xhci1: xHCI version 1.0 [ 1.038584] usb2 at xhci1: USB revision 3.0 [ 1.038584] usb3 at xhci1: USB revision 2.0 [ 1.038584] pchb5 at pci0 dev 8 function 0: vendor 1022 product 1452 (rev. 0x00) [ 1.038584] ppb9 at pci0 dev 8 function 1: vendor 1022 product 1454 (rev. 0x00) [ 1.038584] ppb9: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x16 @ 8.0GT/s [ 1.038584] pci10 at ppb9 bus 10 [ 1.038584] pci10: i/o space, memory space enabled, rd/line, wr/inv ok [ 1.038584] vendor 1022 product 1455 (non-essential instrumentation, subclass 0x00) at pci10 dev 0 function 0 not configured [ 1.038584] ahcisata1 at pci10 dev 0 function 2: vendor 1022 product 7901 (rev. 0x51) [ 1.038584] ahcisata1: 64-bit DMA [ 1.038584] ahcisata1: AHCI revision 1.31, 1 port, 32 slots, CAP 0xf737ff00<PSC,SSC,PMD,FBSS,SPM,SAM,ISS=0x3=Gen3,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A> [ 1.038584] ahcisata1: interrupting at msi7 vec 0 [ 1.038584] atabus8 at ahcisata1 channel 0 [ 1.038584] hdaudio1 at pci10 dev 0 function 3: HD Audio Controller [ 1.038584] hdaudio1: interrupting at msi8 vec 0 [ 1.038584] hdafg1 at hdaudio1: vendor 10ec product 0892 [ 1.038584] hdafg1: DAC00 2ch: Speaker [Jack] [ 1.038584] hdafg1: DAC01 2ch: HP Out [Jack] [ 1.038584] hdafg1: ADC02 2ch: Line In [Jack], Mic In [Jack] [ 1.038584] hdafg1: ADC03 2ch: Mic In [Jack] [ 1.038584] hdafg1: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3 [ 1.038584] audio0 at hdafg1: playback, capture, full duplex, independent [ 1.038584] audio0: slinear_le:16 2ch 48000Hz, blk 40ms for playback [ 1.038584] audio0: slinear_le:16 2ch 48000Hz, blk 40ms for recording [ 1.038584] spkr1 at audio0: PC Speaker (synthesized) [ 1.038584] wsbell at spkr1 not configured [ 1.038584] piixpm0 at pci0 dev 20 function 0: vendor 1022 product 790b (rev. 0x59) [ 1.038584] piixpm0: polling [ 1.038584] iic0 at piixpm0 port 0: I2C bus [ 1.038584] iic1 at piixpm0 port 1: I2C bus [ 1.038584] iic2 at piixpm0 port 2: I2C bus [ 1.038584] iic3 at piixpm0 port 3: I2C bus [ 1.038584] pcib0 at pci0 dev 20 function 3: vendor 1022 product 790e (rev. 0x51) [ 1.038584] pchb6 at pci0 dev 24 function 0: vendor 1022 product 1460 (rev. 0x00) [ 1.038584] pchb7 at pci0 dev 24 function 1: vendor 1022 product 1461 (rev. 0x00) [ 1.038584] pchb8 at pci0 dev 24 function 2: vendor 1022 product 1462 (rev. 0x00) [ 1.038584] pchb9 at pci0 dev 24 function 3: vendor 1022 product 1463 (rev. 0x00) [ 1.038584] pchb10 at pci0 dev 24 function 4: vendor 1022 product 1464 (rev. 0x00) [ 1.038584] pchb11 at pci0 dev 24 function 5: vendor 1022 product 1465 (rev. 0x00) [ 1.038584] pchb12 at pci0 dev 24 function 6: vendor 1022 product 1466 (rev. 0x00) [ 1.038584] pchb13 at pci0 dev 24 function 7: vendor 1022 product 1467 (rev. 0x00) [ 1.038584] isa0 at pcib0 [ 1.038584] com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo [ 1.038584] pckbc0 at isa0 port 0x60-0x64 [ 1.038584] acpicpu0 at cpu0: ACPI CPU [ 1.038584] acpicpu0: C1: FFH, lat 1 us, pow 0 mW [ 1.038584] acpicpu0: C2: I/O, lat 400 us, pow 0 mW [ 1.038584] acpicpu0: P0: FFH, lat 1 us, pow 3867 mW, 3400 MHz [ 1.038584] acpicpu0: P1: FFH, lat 1 us, pow 2537 mW, 2800 MHz [ 1.038584] acpicpu0: P2: FFH, lat 1 us, pow 1237 mW, 1550 MHz [ 1.038584] acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 % [ 1.038584] acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 % [ 1.038584] acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 % [ 1.038584] acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 % [ 1.038584] acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 % [ 1.038584] acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 % [ 1.038584] acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 % [ 1.038584] acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 % [ 1.038584] acpicpu1 at cpu1: ACPI CPU [ 1.038584] acpicpu2 at cpu2: ACPI CPU [ 1.038584] acpicpu3 at cpu3: ACPI CPU [ 1.038584] acpicpu4 at cpu4: ACPI CPU [ 1.038584] acpicpu5 at cpu5: ACPI CPU [ 1.038584] acpicpu6 at cpu6: ACPI CPU [ 1.038584] acpicpu7 at cpu7: ACPI CPU [ 1.038584] acpicpu8 at cpu8: ACPI CPU [ 1.038584] acpicpu9 at cpu9: ACPI CPU [ 1.038584] acpicpu10 at cpu10: ACPI CPU [ 1.038584] acpicpu11 at cpu11: ACPI CPU [ 1.038584] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 2.230426] autoconfiguration error: ERROR: 426 cycle TSC drift observed [ 2.230426] scsibus0: waiting 2 seconds for devices to settle... [ 2.230426] uhub0 at usb0: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0 [ 2.230426] uhub0: 8 ports with 8 removable, self powered [ 2.230426] uhub1 at usb1: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0 [ 2.230426] uhub1: 14 ports with 14 removable, self powered [ 2.230426] uhub2 at usb2: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 3.00/1.00, addr 0 [ 2.230426] uhub2: 4 ports with 4 removable, self powered [ 2.230426] uhub3 at usb3: NetBSD (0000) xHCI root hub (0000), class 9/0, rev 2.00/1.00, addr 0 [ 2.230426] uhub3: 4 ports with 4 removable, self powered [ 2.230426] mfii0: physical disk inserted id 10 enclosure 252 [ 2.230426] mfii0: physical disk inserted id 11 enclosure 252 [ 2.230426] mfii0: physical disk inserted id 12 enclosure 252 [ 2.230426] mfii0: physical disk inserted id 13 enclosure 252 [ 2.230426] mfii0: physical disk inserted id 14 enclosure 252 [ 2.230426] mfii0: physical disk inserted id 15 enclosure 252 [ 2.230426] mfii0: physical disk inserted id 16 enclosure 252 [ 2.230426] mfii0: physical disk inserted id 17 enclosure 252 [ 2.250463] IPsec: Initialized Security Association Processing. [ 2.330486] ahcisata0 port 4: device present, speed: 6.0Gb/s [ 3.861466] wd0 at atabus4 drive 0 [ 3.861466] wd0: <Samsung SSD 860 EVO M.2 500GB> [ 3.861466] wd0: drive supports 1-sector PIO transfers, LBA48 addressing [ 3.861466] wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors [ 3.861466] wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags) [ 3.861466] wd0(ahcisata0:4:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags) [ 3.911498] uplcom0 at uhub1 port 9 [ 3.911498] uplcom0: Prolific Technology Inc. (0x67b) USB-Serial Controller D (0x2303), rev 1.10/4.00, addr 1 [ 3.931511] ucom0 at uplcom0 [ 4.231703] sd0 at scsibus0 target 0 lun 0: <IBM, ServeRAID M5016, 3.46> disk fixed [ 4.231703] sd0: fabricating a geometry [ 4.231703] sd0: 44709 GB, 45782088 cyl, 64 head, 32 sec, 512 bytes/sect x 93761716224 sectors [ 4.231703] sd0: fabricating a geometry [ 4.231703] sd0: GPT GUID: 92bcb7fa-a0ce-46d3-b4ad-66b905089f19 [ 4.231703] dk0 at sd0: "alexandria", 93761712128 blocks at 2048, type: ffs [ 4.231703] dk1 at sd0: "bsdefi", 2014 blocks at 34, type: msdos [ 4.231703] sd0: tagged queueing [ 4.231703] WARNING: 6 errors while detecting hardware; check system log. [ 4.231703] boot device: sd0 [ 4.231703] root on dk0 [ 4.241709] root file system type: ffs [ 4.241709] kern.module.path=/stand/amd64/9.0/modules [ 15.829122] wsdisplay0: screen 1 added (default, vt100 emulation) [ 15.829122] wsdisplay0: screen 2 added (default, vt100 emulation) [ 15.829122] wsdisplay0: screen 3 added (default, vt100 emulation) [ 15.829122] wsdisplay0: screen 4 added (default, vt100 emulation) [ 30.118263] Accounting started