Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-08-04 19:49:47
From: Ken Wellsch
Description: NetBSD/hppa 11.0_BETA on HP9000/785/C3750
Firmware Version 2.0
Duplex Console IO Dependent Code (IODC) revision 1
------------------------------------------------------------------------------
(c) Copyright 1995-2000, Hewlett-Packard Company, All rights reserved
------------------------------------------------------------------------------
Processor Speed State Coprocessor State I/D Cache
--------- -------- --------------------- ----------------- -------------
0 875 MHz Active Functional 768 kB/1536 kB
Central Bus Speed: 120 MHz
Available memory: 8589934592 bytes
Good memory required: 18628608 bytes
Primary boot path: FWSCSI.6.0
Alternate boot path: SCSI.6.0
Console path: GRAPHICS(2)
Keyboard path: USB
CPU 0
NOTICE: Processor self-tests have been disabled because FASTBOOT is
enabled. To enable self-tests, disable FASTBOOT with the FASTBOOT
command in the CONFIGURATION menu and reboot the system.
NOTICE: Memory has been initialized but not tested because FASTBOOT is
enabled. To test memory, disable FASTBOOT with the FASTBOOT
command in the CONFIGURATION menu and reboot the system.
Processor is booting from first available device.
To discontinue, press any key within 10 seconds.
Boot terminated.
----- Main Menu -------------------------------------------------------------
Command Description
------- -----------
BOot [PRI|ALT|<path>] Boot from specified path
PAth [PRI|ALT|CON|KEY [<path>]] Display or modify a path
SEArch [DIsplay|[[IPL] [<path>]]] Search for boot devices
COnfiguration [<command>] Access Configuration menu/commands
INformation [<command>] Access Information menu/commands
SERvice [<command>] Access Service menu/commands
DIsplay Redisplay the current menu
HElp [<menu>|<command>] Display help for menu or command
RESET Restart the system
-----
Main Menu: Enter command > sea
Searching for potential boot device(s)...
This may take several minutes.
To discontinue search, press any key (termination may not be immediate).
Path Number Device Path Device Type
----------- ----------------- -----------
P0 FWSCSI.5.0 ZULUSCSICDROM
P1 FWSCSI.4.0 ZULUSCSICDROM
P2 FWSCSI.0.0 ZULUSCSIHARDDRIVE
Main Menu: Enter command > boot P2
Interact with IPL (Y, N, Q)?> N
Booting...
Boot IO Dependent Code (IODC) revision 0
HARD Booted.
NetBSD/hppa FFS/LFS Primary Bootstrap
32bit firmware
booting from partition a
filesystem: FFS
looking up boot.hp700
looking up boot
loading boot at 0x3b800...done
>> NetBSD/hppa LIF/FFS/LFS Boot, Revision 1.4 (Fri Aug 1 17:05:55 UTC 2025)
>> Enter "reset" to reset system.
Boot: [[[dk0a:]netbsd][-a][-c][-d][-s][-v][-q]] :-
11071256+299480+339496 [397104+372692]=0xd59404
Start @ 0x200000 [1=0xe9c000-0xf58404]...
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.
[ 1.0000000] NetBSD 11.0_BETA (GENERIC) #0: Fri Aug 1 17:05:55 UTC 2025
[ 1.0000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/hppa/compile/GENERIC
[ 1.0000000] HP9000/785/C3700
[ 1.0000000] real mem = 3072 MB (73728 reserved for PROM, 3055 MB used by NetBSD)
[ 1.0000000] avail mem = 2985 MB
[ 1.0000000] mainbus0 (root) [flex fff80000]
[ 1.0000000] pdc0 at mainbus0
[ 1.0000000] power0 at mainbus0
[ 1.0000000] cpu0 at mainbus0 hpa 0xfffa0000 path 32 irq 31: PA8700 (Piranha) rev 0
[ 1.0000000] cpu0: PCXW2, PA-RISC 2.0, lev 1, cat A, 875 MHz clk
[ 1.0000000] cpu0: shadows, 1536K/768K D/I caches, 240 shared TLB, 0/0 D/I BTLBs
[ 1.0000000] cpu0: PCXW2 floating point, rev 1
[ 1.0000000] mem0 at mainbus0 hpa 0xfed10200 path 49: size 3840MB
[ 1.0000000] astro0 at mainbus0 hpa 0xfed00000 path 10: Astro rev 2.1
[ 1.0000000] elroy0 at astro0 hpa 0xfed30000 path 10/0: Elroy TR4.0 APIC ver 20, 7 pins
[ 1.0000000] pci0 at elroy0 bus 0
[ 1.0000000] tlp0 at pci0 dev 12 function 0: DECchip 21143 Ethernet, pass 4.1
[ 1.0000000] tlp0: interrupting at line 2 irq 30
[ 1.0000000] tlp0: Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000000] lxtphy0 at tlp0 phy 1: LXT970 10/100 media interface, rev. 3
[ 1.0000000] lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
[ 1.0000000] Analog Devices AD1889 PCI SoundMAX Controller (audio multimedia) at pci0 dev 13 function 0 not configured
[ 1.0000000] nside0 at pci0 dev 14 function 0: National Semiconductor PC87415 IDE Controller (rev. 0x03)
[ 1.0000000] nside0: using line 0 irq 29 for native-PCI interrupt
[ 1.0000000] atabus0 at nside0 channel 0
[ 1.0000000] atabus1 at nside0 channel 1
[ 1.0000000] ssio0 at pci0 dev 14 function 1: National Semiconductor 87560 Legacy I/O (rev. 0x01)
[ 1.0000000] ssio0: interrupting at line 0 irq 29
[ 1.0000000] com0 at ssio0 offset 3f8 irq 4: ns16550a, 16-byte FIFO
[ 1.0000000] com0: console
[ 1.0000000] com1 at ssio0 offset 2f8 irq 3: ns16550a, 16-byte FIFO
[ 1.0000000] lpt0 at ssio0 offset 378 irq 7
[ 1.0000000] ohci0 at pci0 dev 14 function 2: National Semiconductor USB (rev. 0x02)
[ 1.0000000] ohci0: interrupting at line 0 irq 29
[ 1.0000000] ohci0: OHCI version 1.0, legacy support
[ 1.0000000] usb0 at ohci0: USB revision 1.0
[ 1.0000000] esiop0 at pci0 dev 15 function 0: Symbios Logic 53c896 (ultra2-wide scsi)
[ 1.0000000] esiop0: using on-board RAM
[ 1.0000000] esiop0: interrupting at line 1 irq 26
[ 1.0000000] scsibus0 at esiop0: 16 targets, 8 luns per target
[ 1.0000000] esiop1 at pci0 dev 15 function 1: Symbios Logic 53c896 (ultra2-wide scsi)
[ 1.0000000] esiop1: using on-board RAM
[ 1.0000000] esiop1: interrupting at line 1 irq 26
[ 1.0000000] scsibus1 at esiop1: 16 targets, 8 luns per target
[ 1.0000000] elroy1 at astro0 hpa 0xfed32000 path 10/1: Elroy TR4.0 APIC ver 20, 7 pins
[ 1.0000000] pci1 at elroy1 bus 0
[ 1.0000000] elroy2 at astro0 hpa 0xfed38000 path 10/4: Elroy TR4.0 APIC ver 20, 7 pins
[ 1.0000000] pci2 at elroy2 bus 0
[ 1.0000000] elroy3 at astro0 hpa 0xfed3c000 path 10/6: Elroy TR4.0 APIC ver 20, 7 pins
[ 1.0000000] pci3 at elroy3 bus 0
[ 1.0000000] sti0 at pci3 dev 2 function 0
[ 1.0000000] sti0: rev 8.12;24, ID 0x35ACDA1609A02587
[ 1.0000000] sti0: HPA4982B, 1280x1024 frame buffer, 1280x1024x32 display
[ 1.0000000] sti0: 10x20 font type 1, 40 bpc, charset 0-255
[ 1.0000000] WARNING: system needs entropy for security; see entropy(7)
[ 1.0000030] scsibus0: waiting 2 seconds for devices to settle...
[ 1.0713479] scsibus1: waiting 2 seconds for devices to settle...
[ 1.1430957] wsdisplay1 at sti0 kbdmux 1
[ 1.1888535] uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[ 7.6775271] sd0 at scsibus1 target 0 lun 0: <ZULUSCSI, HARDDRIVE, 2.3B> disk fixed
[ 7.7646622] sd0: 16065 MB, 2048 cyl, 255 head, 63 sec, 512 bytes/sect x 32901120 sectors
[ 7.8613819] sd0: sync (50.00ns offset 15), 8-bit (20.000MB/s) transfers
[ 8.8225744] cd0 at scsibus1 target 4 lun 0: <ZULUSCSI, CDROM, 2.3B> cdrom removable
[ 8.9125105] cd0: sync (50.00ns offset 15), 8-bit (20.000MB/s) transfers
[ 8.9936297] cd1 at scsibus1 target 5 lun 0: <ZULUSCSI, CDROM, 2.3B> cdrom removable
[ 9.0842127] cd1: sync (50.00ns offset 15), 8-bit (20.000MB/s) transfers
[ 11.8055444] swwdog0: software watchdog initialized
[ 16.8767135] boot device: sd0
[ 16.9177989] root on sd0a dumps on sd0b
[ 16.9593973] entropy: best effort
[ 17.0009995] root file system type: ffs
[ 17.0516462] kern.module.path=/stand/hppa/11.0/modules
Mon Aug 4 19:35:04 -00 2025
Starting root file system check:
/dev/rsd0a: file system is clean; not checking
Setting sysctl variables:
ddb.onpanic: 1 -> 0
swapctl: setting dump device to /dev/sd0b
swapctl: adding /dev/sd0b as swap device at priority 0
Starting file system checks:
/dev/rsd0d: file system is clean; not checking
[ 18.8836668] entropy: ready
Loaded entropy from /var/db/entropy-file.
Waiting for entropy...done
Setting tty flags.
Starting network.
Hostname: c3750nb110.localhost
IPv6 mode: host
Configuring network interfaces: tlp0.
Adding interface aliases:.
Waiting for duplicate address detection to finish...
Starting dhcpcd.
Building databases: dev, utmp, utmpx.
Starting syslogd.
Setting date via ntp.
Mounting all file systems...
Clearing temporary files.
Checking quotas: done.
swapctl: setting dump device to /dev/sd0b
Starting virecover.
Checking for core dump...
savecore: no core dump
Starting local daemons:.
Updating motd.
Starting ntpd.
Starting sshd.
Starting postfix.
postfix/postlog: starting the Postfix mail system
Starting inetd.
Starting cron.
Mon Aug 4 15:35:38 EDT 2025
NetBSD/hppa (c3750nb110.localhost) (constty)
login: