Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-08-19 13:59:36
From: Ken Wellsch
Description: NetBSD/sparc64 11.0_BETA on Sun Fire V215
Sun Fire V215, No Keyboard Copyright 2007 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.25.10, 16384 MB memory installed, Serial #xxxxxxx. Ethernet address xx:xx:xx:xx:xx:xx, Host ID: xxxxxxx. Rebooting with command: boot /pci@1e,600000/pci@0/pci@8/pci@0/scsi@8/disk@0,0:a Boot device: /pci@1e,600000/pci@0/pci@8/pci@0/scsi@8/disk@0,0:a File and args: NetBSD IEEE 1275 Multi-FS Bootblock Version $NetBSD: bootblk.fth,v 1.18 2025/02/28 09:07:12 andvar Exp $ >> NetBSD/sparc64 OpenFirmware Boot, Revision 1.20 (Fri Aug 1 17:05:55 UTC 2025) =0xcc7f40 Loading netbsd: 13401856+514208+326136 [758496+497257]=0xf00560 [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.0000000] 2024, 2025 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 11.0_BETA (GENERIC) #0: Fri Aug 1 17:05:55 UTC 2025 [ 1.0000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/sparc64/compile/GENERIC [ 1.0000000] total memory = 16384 MB [ 1.0000000] avail memory = 16074 MB [ 1.0000000] mainbus0 (root): SUNW,Sun-Fire-V215 (Sun Fire V215): [_HOSTID_XXXXX] [ 1.0000000] cpu0 at mainbus0: SUNW,UltraSPARC-IIIi @ 1504 MHz, CPU id 0 [ 1.0000000] cpu0: manuf 3e, impl 16, mask 34 [ 1.0000000] cpu0: system tick frequency 20 MHz [ 1.0000000] cpu0: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l) [ 1.0000000] cpu1 at mainbus0: SUNW,UltraSPARC-IIIi @ 1504 MHz, CPU id 1 [ 1.0000000] cpu1: manuf 3e, impl 16, mask 34 [ 1.0000000] cpu1: system tick frequency 20 MHz [ 1.0000000] cpu1: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l) [ 1.0000000] memory-controller at mainbus0 not configured [ 1.0000000] memory-controller at mainbus0 not configured [ 1.0000000] pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 14 [ 1.0000000] pyro0: pci0 at pyro0 [ 1.0000000] ppb0 at pci0 dev 0 function 0: PLX Technology product 8532 (rev. 0xbc) [ 1.0000000] ppb0: PCI Express capability version 1 <Upstream Port of PCI-E Switch> [ 1.0000000] pci1 at ppb0 bus 3 [ 1.0000000] ppb1 at pci1 dev 1 function 0: PLX Technology product 8532 (rev. 0xbc) [ 1.0000000] ppb1: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s [ 1.0000000] pci2 at ppb1 bus 4 [ 1.0000000] ppb2 at pci2 dev 0 function 0: Acer Labs M5249 Hypertransport to PCI Bridge (rev. 0x00) [ 1.0000000] ppb2: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge> [ 1.0000000] pci3 at ppb2 bus 5 [ 1.0000000] ohci0 at pci3 dev 28 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03) [ 1.0000000] ohci0: interrupting at ivec 780 [ 1.0000000] ohci0: OHCI version 1.0, legacy support [ 1.0000000] usb0 at ohci0: USB revision 1.0 [ 1.0000000] ohci1 at pci3 dev 28 function 1: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03) [ 1.0000000] ohci1: interrupting at ivec 780 [ 1.0000000] ohci1: OHCI version 1.0, legacy support [ 1.0000000] usb1 at ohci1: USB revision 1.0 [ 1.0000000] ehci0 at pci3 dev 28 function 3: Acer Labs M5239 USB 2.0 Host Controller (rev. 0x01) [ 1.0000000] ehci0: interrupting at ivec 781 [ 1.0000000] ehci0: 2 companion controllers, 3 ports each: ohci0 ohci1 [ 1.0000000] usb2 at ehci0: USB revision 2.0 [ 1.0000000] ebus0 at pci3 dev 30 function 0: Acer Labs product 1575, revision 0x00 [ 1.0000000] rtc0 at ebus0 addr 70-73: mc146818 compatible time-of-day clock: m5823 [ 1.0000000] aceride0 at pci3 dev 31 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc8) [ 1.0000000] aceride0: using ivec 2f84 for native-PCI interrupt [ 1.0000000] atabus0 at aceride0 channel 0 [ 1.0000000] atabus1 at aceride0 channel 1 [ 1.0000000] ppb3 at pci1 dev 2 function 0: PLX Technology product 8532 (rev. 0xbc) [ 1.0000000] ppb3: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s [ 1.0000000] pci4 at ppb3 bus 6 [ 1.0000000] ppb4 at pci1 dev 8 function 0: PLX Technology product 8532 (rev. 0xbc) [ 1.0000000] ppb4: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x8 @ 2.5GT/s [ 1.0000000] pci5 at ppb4 bus 7 [ 1.0000000] ppb5 at pci5 dev 0 function 0: PLX Technology PEX 8114 PCIe-to-PCI/PCI-X Bridge (rev. 0xbc) [ 1.0000000] ppb5: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge> [ 1.0000000] pci6 at ppb5 bus 8 [ 1.0000000] mpt0 at pci6 dev 8 function 0: Symbios Logic 53c1020/53c1030 (rev. 0x08) [ 1.0000000] mpt0: interrupting at ivec 2f94 [ 1.0000000] scsibus0 at mpt0: 16 targets, 8 luns per target [ 1.0000000] mpt1 at pci6 dev 8 function 1: Symbios Logic 53c1020/53c1030 (rev. 0x08) [ 1.0000000] mpt1: interrupting at ivec 2f95 [ 1.0000000] scsibus1 at mpt1: 16 targets, 8 luns per target [ 1.0000000] ppb6 at pci1 dev 9 function 0: PLX Technology product 8532 (rev. 0xbc) [ 1.0000000] ppb6: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s [ 1.0000000] pci7 at ppb6 bus 9 [ 1.0000000] ppb7 at pci7 dev 0 function 0: ServerWorks BCM5714/BCM5715 Integral PCI-E to PCI-X Bridge (rev. 0xb5) [ 1.0000000] ppb7: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge> [ 1.0000000] pci8 at ppb7 bus 10 [ 1.0000000] bge0 at pci8 dev 4 function 0: Broadcom BCM5714 Gigabit Ethernet [ 1.0000000] bge0: interrupting at ivec 3795 [ 1.0000000] bge0: HW config 00010115, 00000015, 00000000, 00000000 00000000 [ 1.0000000] bge0: ASIC BCM5715 A3 (0x9003), Ethernet address [_MAC_XXXXXXXXXX] [ 1.0000000] bge0: WARNING: failed to restrict dma range, falling back to parent bus dma range [ 1.0000000] brgphy0 at bge0 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0 [ 1.0000000] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.0000000] bge1 at pci8 dev 4 function 1: Broadcom BCM5714 Gigabit Ethernet [ 1.0000000] bge1: interrupting at ivec 3796 [ 1.0000000] bge1: HW config 00000114, 00000014, 00000000, 00000000 00000000 [ 1.0000000] bge1: ASIC BCM5715 A3 (0x9003), Ethernet address [_MAC_XXXXXXXXXX] [ 1.0000000] bge1: WARNING: failed to restrict dma range, falling back to parent bus dma range [ 1.0000000] brgphy1 at bge1 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0 [ 1.0000000] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.0000000] ppb8 at pci8 dev 8 function 0: ServerWorks HT1000 PCI/PCI-X Bridge (rev. 0xb4) [ 1.0000000] pci9 at ppb8 bus 11 [ 1.0000000] ppb9 at pci1 dev 10 function 0: PLX Technology product 8532 (rev. 0xbc) [ 1.0000000] ppb9: PCI Express capability version 1 <Downstream Port of PCI-E Switch> x4 @ 2.5GT/s [ 1.0000000] pci10 at ppb9 bus 12 [ 1.0000000] ppb10 at pci10 dev 0 function 0: ServerWorks BCM5714/BCM5715 Integral PCI-E to PCI-X Bridge (rev. 0xb5) [ 1.0000000] ppb10: PCI Express capability version 1 <PCI-E to PCI/PCI-X Bridge> [ 1.0000000] pci11 at ppb10 bus 13 [ 1.0000000] bge2 at pci11 dev 4 function 0: Broadcom BCM5714 Gigabit Ethernet [ 1.0000000] bge2: interrupting at ivec 3796 [ 1.0000000] bge2: HW config 00010115, 00000015, 00000000, 00000000 00000000 [ 1.0000000] bge2: ASIC BCM5715 A3 (0x9003), Ethernet address [_MAC_XXXXXXXXXX] [ 1.0000000] bge2: WARNING: failed to restrict dma range, falling back to parent bus dma range [ 1.0000000] brgphy2 at bge2 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0 [ 1.0000000] brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.0000000] bge3 at pci11 dev 4 function 1: Broadcom BCM5714 Gigabit Ethernet [ 1.0000000] bge3: interrupting at ivec 3797 [ 1.0000000] bge3: HW config 00000114, 00000014, 00000000, 00000000 00000000 [ 1.0000000] bge3: ASIC BCM5715 A3 (0x9003), Ethernet address [_MAC_XXXXXXXXXX] [ 1.0000000] bge3: WARNING: failed to restrict dma range, falling back to parent bus dma range [ 1.0000000] brgphy3 at bge3 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0 [ 1.0000000] brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.0000000] ppb11 at pci11 dev 8 function 0: ServerWorks HT1000 PCI/PCI-X Bridge (rev. 0xb4) [ 1.0000000] pci12 at ppb11 bus 14 [ 1.0000000] mpt2 at pci12 dev 1 function 0: Symbios Logic SAS1064 (rev. 0x02) [ 1.0000000] mpt2: interrupting at ivec 2f8f [ 1.0000000] mpt2: Phy 0: Link Status Unknown [ 1.0000000] scsibus2 at mpt2: 63 targets, 8 luns per target [ 1.0000000] pyro1 at mainbus0: "Fire", rev 3, ign 7c0, bus B 2 to 255 [ 1.0000000] pyro1: pci13 at pyro1 [ 1.0000000] ebus1 at mainbus0 [ 1.0000000] flashprom at ebus1 addr 0-1fffff not configured [ 1.0000000] com0 at ebus1 addr 80-87 ipl 7c8: ns16550a, 16-byte FIFO [ 1.0000000] com0: console [ 1.0000000] com1 at ebus1 addr 40-47 ipl 7c9: ns16550a, 16-byte FIFO [ 1.0000000] rmc-comm at ebus1 addr 0-7 ipl 7ca not configured [ 1.0000000] gpio at ebus1 addr c0-c0 not configured [ 1.0000000] env-monitor at ebus1 addr 0-80 not configured [ 1.0000000] power at ebus1 addr 40-c1 ipl 7c3 not configured [ 1.0000000] i2c at mainbus0 not configured [ 1.0000000] pcons at mainbus0 not configured [ 1.0000000] WARNING: system needs entropy for security; see entropy(7) [ 1.0000161] No counter-timer -- using %stick at 20MHz as system clock. [ 2.7483794] scsibus0: waiting 2 seconds for devices to settle... [ 2.7483794] scsibus1: waiting 2 seconds for devices to settle... [ 2.7483794] uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 2.7483794] scsibus2: waiting 2 seconds for devices to settle... [ 2.7483794] uhub1 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 2.7483794] uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 2.9246951] atapibus0 at atabus0: 2 targets [ 2.9846950] cd0 at atapibus0 drive 0: <TEAC DV-W28SLC, , 1.0C> cdrom removable [ 4.8046945] sd0 at scsibus0 target 0 lun 0: <ZULUSCSI, HARDDRIVE, 2.3W> disk fixed [ 4.8946963] sd0: 8189 MB, 1044 cyl, 255 head, 63 sec, 512 bytes/sect x 16771860 sectors [ 4.9946962] sd0: sync (50.00ns offset 15), 16-bit (40.000MB/s) transfers [ 5.0820248] sd1 at scsibus0 target 1 lun 0: <ZULUSCSI, HARDDRIVE, 2.3W> disk fixed [ 5.1705641] sd1: 8189 MB, 1044 cyl, 255 head, 63 sec, 512 bytes/sect x 16771860 sectors [ 5.2663957] sd1: sync (50.00ns offset 15), 16-bit (40.000MB/s) transfers [ 6.8546956] cd1 at scsibus0 target 5 lun 0: <ZULUSCSI, CDROM, 2.3W> cdrom removable [ 6.9546955] cd1: sync (50.00ns offset 15), 16-bit (40.000MB/s) transfers [ 7.4946946] entropy: best effort [ 19.0446947] sd2 at scsibus2 target 0 lun 0: <HITACHI, H101473SCSUN72G, SA23> disk fixed [ 19.1381403] sd2: 70007 MB, 14089 cyl, 24 head, 424 sec, 512 bytes/sect x 143374738 sectors [ 19.2370969] sd2: tagged queueing [ 19.2946942] swwdog0: software watchdog initialized [ 19.3646951] WARNING: 4 errors while detecting hardware; check system log. [ 19.4446942] root on sd0a dumps on sd0b [ 19.4946950] root file system type: ffs [ 19.5346943] kern.module.path=/stand/sparc64/11.0/modules Tue Aug 19 05:41:50 EDT 2025 Starting root file system check: /dev/rsd0a: file system is clean; not checking Setting sysctl variables: ddb.onpanic: 1 -> 0 swapctl: setting dump device to /dev/sd0b swapctl: adding /dev/sd0b as swap device at priority 0 Starting file system checks: [ 20.4846978] entropy: ready Loaded entropy from /var/db/entropy-file. Waiting for entropy...done Setting tty flags. Starting network. Hostname: v215nb110.localhost IPv6 mode: host Configuring network interfaces: bge0. Adding interface aliases:. Waiting for duplicate address detection to finish... Starting dhcpcd. Building databases: dev, utmp, utmpx. Starting syslogd. Setting date via ntp. Mounting all file systems... Clearing temporary files. Checking quotas: done. Setting securelevel: kern.securelevel: 0 -> 1 swapctl: setting dump device to /dev/sd0b Starting virecover. Checking for core dump... savecore: no core dump Starting local daemons:. Updating motd. Starting ntpd. Starting sshd. Starting inetd. Starting cron. Tue Aug 19 09:42:15 EDT 2025 NetBSD/sparc64 (v215nb110.localhost) (constty) login: v215nb110# dd if=/dev/rsd0c of=/dev/null bs=1m count=300 300+0 records in 300+0 records out 314572800 bytes transferred in 9.908 secs (31749374 bytes/sec) v215nb110# dd if=/dev/rsd1c of=/dev/null bs=1m count=300 300+0 records in 300+0 records out 314572800 bytes transferred in 9.996 secs (31469867 bytes/sec) v215nb110# dd if=/dev/rsd2c of=/dev/null bs=1m count=300 300+0 records in 300+0 records out 314572800 bytes transferred in 3.533 secs (89038437 bytes/sec)