Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-08-19 17:48:12
From: Ken Wellsch
Description: NetBSD/sparc64 11.0_BETA on Netra T1 105
Netra t1 (UltraSPARC-IIi 440MHz), No Keyboard OpenBoot 3.10.25 ME, 1024 MB memory installed, Serial #xxxxxx. Ethernet address xx:xx:xx:xx:xx:xx, Host ID: xxxxxx. Executing last command: boot /pci@1f,0/pci@1,1/scsi@2/disk@1,0:a Boot device: /pci@1f,0/pci@1,1/scsi@2/disk@1,0:a File and args: NetBSD IEEE 1275 Multi-FS Bootblock Version $NetBSD: bootblk.fth,v 1.18 2025/02/28 09:07:12 andvar Exp $ >> NetBSD/sparc64 OpenFirmware Boot, Revision 1.20 (Fri Aug 1 17:05:55 UTC 2025) =0xcc7f40 Loading netbsd: 13401856+514208+326136 [758496+497257]=0xf00560 [ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.0000000] 2024, 2025 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 11.0_BETA (GENERIC) #0: Fri Aug 1 17:05:55 UTC 2025 [ 1.0000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/sparc64/compile/GENERIC [ 1.0000000] total memory = 1024 MB [ 1.0000000] avail memory = 984 MB [ 1.0000000] mainbus0 (root): SUNW,UltraSPARC-IIi-cEngine (Netra t1): [_HOSTID_XXXXX] [ 1.0000000] cpu0 at mainbus0: SUNW,UltraSPARC-IIi @ 440.034 MHz, CPU id 0 [ 1.0000000] cpu0: manuf 17, impl 12, mask 91 [ 1.0000000] cpu0: 16K instruction (32 b/l), 16K data (32 b/l), 2048K external (64 b/l) [ 1.0000000] psycho0 at mainbus0 addr 0xfffc0000 [ 1.0000000] psycho0: SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 3; PCI bus 0 [ 1.0000000] pci0 at psycho0 [ 1.0000000] ppb0 at pci0 dev 1 function 1: Sun Microsystems Simba PCI Bridge (rev. 0x13) [ 1.0000000] pci1 at ppb0 bus 1 [ 1.0000000] ebus0 at pci1 dev 1 function 0: Sun Microsystems PCIO Ebus2, revision 0x01 [ 1.0000000] auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 72c000-72c003, 72f000-72f003 [ 1.0000000] power at ebus0 addr 724000-724003 ipl 25 not configured [ 1.0000000] SUNW,pll at ebus0 addr 504000-504002 not configured [ 1.0000000] com0 at ebus0 addr 3803f8-3803ff ipl 1c: ns16550a, 16-byte FIFO [ 1.0000000] com0: console [ 1.0000000] com1 at ebus0 addr 3602f8-3602ff ipl 14: ns16550a, 16-byte FIFO [ 1.0000000] lpt0 at ebus0 addr 340278-340287, 30015c-30015d, 700000-70000f ipl 22 [ 1.0000000] fdthree at ebus0 addr 3203f0-3203f7, 706000-70600f, 720000-720003 ipl 27 not configured [ 1.0000000] clock0 at ebus0 addr 0-1fff: mk48t59 [ 1.0000000] flashprom at ebus0 addr 0-fffff not configured [ 1.0000000] watchdog at ebus0 addr 200000-20003f ipl 4 not configured [ 1.0000000] display7seg at ebus0 addr 200040-200040 not configured [ 1.0000000] beeper at ebus0 addr 722000-722003 not configured [ 1.0000000] flashprom at ebus0 addr 400000-5fffff not configured [ 1.0000000] flashprom at ebus0 addr 800000-9fffff not configured [ 1.0000000] pcfiic0 at ebus0 addr 600000-600003 ipl 28 [ 1.0000000] iic0 at pcfiic0: I2C bus [ 1.0000000] adc (i2cpcf,8591) at iic0 addr 0x4f not configured [ 1.0000000] gpio (i2cpcf,8574a) at iic0 addr 0x38 not configured [ 1.0000000] gpio (i2cpcf,8574a) at iic0 addr 0x39 not configured [ 1.0000000] pcfiic1 at ebus0 addr 100000-100003 ipl 1b [ 1.0000000] iic1 at pcfiic1: I2C bus [ 1.0000000] lom0 at ebus0 addr 400000-400063: SUNW,lom: LOMlite rev 2.2 [ 1.0000000] hme0 at pci1 dev 1 function 1: Sun Happy Meal Ethernet, rev. 1 [ 1.0000000] hme0: interrupting at ivec 3021 [ 1.0000000] hme0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.0000000] ukphy0 at hme0 phy 0: OUI 0x0006b8, model 0x000c, rev. 1 [ 1.0000000] ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.0000000] ukphy1 at hme0 phy 1: OUI 0x0006b8, model 0x000c, rev. 1 [ 1.0000000] ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.0000000] esiop0 at pci1 dev 2 function 0: Symbios Logic 53c875 (ultra-wide scsi) [ 1.0000000] esiop0: using on-board RAM [ 1.0000000] esiop0: interrupting at ivec 2820 [ 1.0000000] scsibus0 at esiop0: 16 targets, 8 luns per target [ 1.0000000] hme1 at pci1 dev 3 function 1: Sun Happy Meal Ethernet, rev. 1 [ 1.0000000] hme1: interrupting at ivec 301a [ 1.0000000] hme1: Ethernet address [_MAC_XXXXXXXXXX] [ 1.0000000] ukphy2 at hme1 phy 0: OUI 0x0006b8, model 0x000c, rev. 1 [ 1.0000000] ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.0000000] ppb1 at pci0 dev 1 function 0: Sun Microsystems Simba PCI Bridge (rev. 0x13) [ 1.0000000] pci2 at ppb1 bus 2 [ 1.0000000] ppb2 at pci2 dev 1 function 0: Digital Equipment DC21150 PCI-PCI Bridge (rev. 0x06) [ 1.0000000] pci3 at ppb2 bus 3 [ 1.0000000] cmdide0 at pci3 dev 14 function 0: CMD Technology PCI0646 (rev. 0x03) [ 1.0000000] cmdide0: primary channel configured to native-PCI mode, channel non-independent [ 1.0000000] cmdide0: using ivec 2802 for native-PCI interrupt [ 1.0000000] atabus0 at cmdide0 channel 0 [ 1.0000000] cmdide0: secondary channel configured to native-PCI mode, channel non-independent [ 1.0000000] atabus1 at cmdide0 channel 1 [ 1.0000000] pcons at mainbus0 not configured [ 1.0000000] WARNING: system needs entropy for security; see entropy(7) [ 1.0000030] No counter-timer -- using %tick at 440.034MHz as system clock. [ 1.0000030] scsibus0: waiting 2 seconds for devices to settle... [ 1.2799700] atapibus0 at atabus1: 2 targets [ 1.3299714] cd0 at atapibus0 drive 0: <TOSHIBA CD-ROM XM-1902B, , 1114> cdrom removable [ 3.2399690] sd0 at scsibus0 target 0 lun 0: <ZULUSCSI, HARDDRIVE, 2.3W> disk fixed [ 3.3300728] sd0: 8189 MB, 1044 cyl, 255 head, 63 sec, 512 bytes/sect x 16771860 sectors [ 3.4236618] sd0: sync (50.00ns offset 15), 16-bit (40.000MB/s) transfers [ 3.5099687] sd1 at scsibus0 target 1 lun 0: <ZULUSCSI, HARDDRIVE, 2.3W> disk fixed [ 3.6040882] sd1: 8189 MB, 1044 cyl, 255 head, 63 sec, 512 bytes/sect x 16771860 sectors [ 3.7018395] sd1: sync (50.00ns offset 15), 16-bit (40.000MB/s) transfers [ 4.6899701] cd1 at scsibus0 target 5 lun 0: <ZULUSCSI, CDROM, 2.3W> cdrom removable [ 4.7809665] cd1: sync (50.00ns offset 15), 16-bit (40.000MB/s) transfers [ 7.5199671] swwdog0: software watchdog initialized [ 7.5899670] root on sd1a dumps on sd1b [ 7.6346000] entropy: best effort [ 7.6799668] root file system type: ffs [ 7.7238295] kern.module.path=/stand/sparc64/11.0/modules Tue Aug 19 12:36:41 EDT 2025 Starting root file system check: /dev/rsd1a: file system is clean; not checking Setting sysctl variables: ddb.onpanic: 1 -> 0 swapctl: setting dump device to /dev/sd1b swapctl: adding /dev/sd1b as swap device at priority 0 Starting file system checks: [ 9.7699907] entropy: ready Loaded entropy from /var/db/entropy-file. Waiting for entropy...done Setting tty flags. Starting network. Hostname: t105nb110.localhost IPv6 mode: host Configuring network interfaces: hme0. Adding interface aliases:. Waiting for duplicate address detection to finish... Starting dhcpcd. Building databases: dev, utmp, utmpx. Starting syslogd. Setting date via ntp. Mounting all file systems... Clearing temporary files. Checking quotas: done. Setting securelevel: kern.securelevel: 0 -> 1 swapctl: setting dump device to /dev/sd1b Starting virecover. Checking for core dump... savecore: no core dump Starting local daemons:. Updating motd. Starting ntpd. Starting inetd. Starting cron. Tue Aug 19 12:37:10 EDT 2025 NetBSD/sparc64 (t105nb110.localhost) (constty) login: t105nb110# dd if=/dev/rsd0c of=/dev/null bs=1m count=300 300+0 records in 300+0 records out 314572800 bytes transferred in 10.418 secs (30195123 bytes/sec) t105nb110# dd if=/dev/rsd1c of=/dev/null bs=1m count=300 300+0 records in 300+0 records out 314572800 bytes transferred in 10.386 secs (30288157 bytes/sec)