Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-10-04 07:00:20
From: skrll
Description: etBSD-current/riscv64 on StarFive VisionFive 2 v1.3B
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 11.99.3 (GENERIC64) #4: Sat Oct 4 07:57:10 BST 2025 [ 1.0000000] nick@zoom:/home/nick/netbsd/nbcvs/obj.riscv64/sys/arch/riscv/compile/GENERIC64 [ 1.0000000] total memory = 8181 MB [ 1.0000000] avail memory = 7913 MB [ 1.0000000] entropy: ready [ 1.0000000] mainbus0 (root) [ 1.0000000] simplebus0 at mainbus0: StarFive VisionFive 2 v1.3B [ 1.0000000] simplebus1 at simplebus0 [ 1.0000000] cpus0 at simplebus0 [ 1.0000000] simplebus2 at simplebus0 [ 1.0000000] cpu0 at cpus0: SiFive 7-Series Processor (E7, S7, U7 series) imp. 4210427 [ 1.0000000] cpu1 at cpus0: SiFive 7-Series Processor (E7, S7, U7 series) imp. 4210427 [ 1.0000000] cpu2 at cpus0: SiFive 7-Series Processor (E7, S7, U7 series) imp. 4210427 [ 1.0000000] cpu3 at cpus0: SiFive 7-Series Processor (E7, S7, U7 series) imp. 4210427 [ 1.0000000] intc0 at cpu0: local interrupt controller [ 1.0000000] intc1 at cpu1: local interrupt controller [ 1.0000000] intc2 at cpu2: local interrupt controller [ 1.0000000] intc3 at cpu3: local interrupt controller [ 1.0000000] fclock0 at simplebus0: 49152000 Hz fixed clock (tdm_ext) [ 1.0000000] fclock1 at simplebus0: 12288000 Hz fixed clock (mclk_ext) [ 1.0000000] fclock2 at simplebus0: 12288000 Hz fixed clock (i2srx_bclk_ext) [ 1.0000000] fclock3 at simplebus0: 192000 Hz fixed clock (i2srx_lrck_ext) [ 1.0000000] syscon0 at simplebus1: System Controller Registers [ 1.0000000] jh7110syscon0 at simplebus1: JH7110 STG system controller [ 1.0000000] fclock4 at simplebus0: 24000000 Hz fixed clock (osc) [ 1.0000000] fclock5 at simplebus0: 12288000 Hz fixed clock (i2stx_bclk_ext) [ 1.0000000] fclock6 at simplebus0: 192000 Hz fixed clock (i2stx_lrck_ext) [ 1.0000000] fclock7 at simplebus0: 50000000 Hz fixed clock (gmac1_rmii_refin) [ 1.0000000] fclock8 at simplebus0: 125000000 Hz fixed clock (gmac1_rgmii_rxin) [ 1.0000000] syscon1 at simplebus1: System Controller Registers [ 1.0000000] fclock9 at simplebus0: 50000000 Hz fixed clock (gmac0_rmii_refin) [ 1.0000000] fclock10 at simplebus0: 125000000 Hz fixed clock (gmac0_rgmii_rxin) [ 1.0000000] fclock11 at simplebus0: 32768 Hz fixed clock (rtc_osc) [ 1.0000000] fclock12 at simplebus0: 74250000 Hz fixed clock (dvp_clk) [ 1.0000000] fclock13 at simplebus0: 297000000 Hz fixed clock (hdmitx0_pixelclk) [ 1.0000000] jh7110clkc0 at simplebus1: JH7110 System Clock and Reset Generator [ 1.0000000] plic0 at simplebus1: RISC-V PLIC (136 IRQs) [ 1.0000000] jh7110pinctrl0 at simplebus1: Pin Controller [ 1.0000000] jh7110clkc1 at simplebus1: JH7110 System-Top-Group Clock and Reset Generator [ 1.0000000] jh7110clkc2 at simplebus1: JH7110 Always-On Clock and Reset Generator [ 1.0000000] jh7110pinctrl1 at simplebus1: Pin Controller [ 1.0000000] jh7110clkc3 at simplebus1: JH7110 Video Output Clock and Reset Generator [ 1.0000000] jh7110pciephy0 at simplebus1: JH7110 PCIe PHY [ 1.0000000] jh7110pciephy1 at simplebus1: JH7110 PCIe PHY [ 1.0000000] ccache0 at simplebus1: L2 cache controller. 2048 KiB/64B 16-way (2048 set). [ 1.0000000] /opp-table-0 at simplebus0 not configured [ 1.0000000] dwiic0 at simplebus1: I2C controller [ 1.0000000] dwiic0: interrupting on plic0 irq 50 [ 1.0000000] iic0 at dwiic0: I2C bus [ 1.0000000] pmic (x-powers,axp15060) at iic0 addr 0x36 not configured [ 1.0000000] jh71x0temp0 at simplebus1: JH71x0 temperature sensor [ 1.0000000] /soc/dma-controller@16050000 at simplebus1 not configured [ 1.0000000] /soc/phy@10200000 at simplebus1 not configured [ 1.0000000] /soc/syscon@13030000/clock-controller at syscon0 not configured [ 1.0000000] /soc/dma-controller@16008000 at simplebus1 not configured [ 1.0000000] eqos0 at simplebus1: DesignWare EQOS ver 0x52 (0x41) [ 1.0000000] eqos0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.0000000] mcommphy0 at eqos0 phy 0: Motorcomm YT8531 GbE PHY [ 1.0000000] mcommphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto [ 1.0000000] eqos0: interrupting on plic0 irq 7 [ 1.0000000] eqos1 at simplebus1: DesignWare EQOS ver 0x52 (0x41) [ 1.0000000] eqos1: Ethernet address [_MAC_XXXXXXXXXX] [ 1.0000000] mcommphy1 at eqos1 phy 0: Motorcomm YT8531 GbE PHY [ 1.0000000] mcommphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto [ 1.0000000] eqos1: interrupting on plic0 irq 78 [ 1.0000000] /soc/clock-controller@19810000 at simplebus1 not configured [ 1.0000000] /soc/phy@19820000 at simplebus1 not configured [ 1.0000000] /soc/isp@19840000 at simplebus1 not configured [ 1.0000000] /soc/power-controller@17030000 at simplebus1 not configured [ 1.0000000] /soc/csi@19800000 at simplebus1 not configured [ 1.0000000] jh7110pcie0 at simplebus1: PCIe [ 1.0000000] jh7110pcie0: interrupting on plic0 irq 56 [ 1.0000000] pci0 at jh7110pcie0 bus 0 [ 1.0000000] ppb0 at pci0 dev 0 function 0: vendor 1556 product 1111 (rev. 0x02) [ 1.0000000] ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s [ 1.0000000] pci1 at ppb0 bus 1 [ 1.0000000] xhci0 at pci1 dev 0 function 0: vendor 1106 product 3483 (rev. 0x01) [ 1.0000000] xhci0: interrupting at plic0 irq 56 [ 1.0000000] usb0 at xhci0: USB revision 3.0 [ 1.0000000] usb1 at xhci0: USB revision 2.0 [ 1.0000000] jh7110pcie1 at simplebus1: PCIe [ 1.0000000] jh7110pcie1: interrupting on plic0 irq 57 [ 1.0000000] pci2 at jh7110pcie1 bus 0 [ 1.0000000] ppb1 at pci2 dev 0 function 0: vendor 1556 product 1111 (rev. 0x02) [ 1.0000000] ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s [ 1.0000000] pci3 at ppb1 bus 1 [ 1.0000000] nvme0 at pci3 dev 0 function 0: vendor 144d product a808 (rev. 0x00) [ 1.0000000] nvme0: NVMe 1.3 [ 1.0000000] nvme0: interrupting at plic0 irq 57 [ 1.0000000] nvme0: Samsung SSD 970 EVO Plus 1TB, firmware 4B2QEXM7, serial S6S1NS0T807860V [ 1.0000000] ld4 at nvme0 nsid 1 [ 1.0000000] ld4: 931 GB, 121601 cyl, 255 head, 63 sec, 512 bytes/sect x 1953525168 sectors (0 bytes/physsect) [ 1.0000000] /sound at simplebus0 not configured [ 1.0000000] /soc/pwmdac@100b0000 at simplebus1 not configured [ 1.0000000] /audio-codec at simplebus0 not configured [ 1.0000000] /soc/timer@2000000 at simplebus1 not configured [ 1.0000000] com0 at simplebus1: DesignWare APB UART, no fifo [ 1.0000000] com0: console [ 1.0000000] com0: interrupting on plic0 irq 32 [ 1.0000000] dwiic1 at simplebus1: I2C controller [ 1.0000000] dwiic1: interrupting on plic0 irq 35 [ 1.0000000] iic1 at dwiic1: I2C bus [ 1.0000000] dwiic2 at simplebus1: I2C controller [ 1.0000000] dwiic2: interrupting on plic0 irq 37 [ 1.0000000] iic2 at dwiic2: I2C bus [ 1.0000000] /soc/spi@10060000 at simplebus1 not configured [ 1.0000000] jh71x0usb0 at simplebus1: USB [ 1.0000000] dwiic3 at simplebus1: I2C controller [ 1.0000000] dwiic3: interrupting on plic0 irq 51 [ 1.0000000] iic3 at dwiic3: I2C bus [ 1.0000000] /soc/pwm@120d0000 at simplebus1 not configured [ 1.0000000] /soc/spi@13010000 at simplebus1 not configured [ 1.0000000] /soc/crypto@16000000 at simplebus1 not configured [ 1.0000000] jh7110trng0 at simplebus1: JH7110 TRNG [ 1.0000000] jh7110trng0: interrupting on plic0 irq 30 [ 1.0000000] dwcmmc0 at simplebus1: DesignWare SD/MMC [ 1.0000000] dwcmmc0: interrupting on plic0 irq 74 [ 1.0000000] dwcmmc1 at simplebus1: DesignWare SD/MMC [ 1.0000000] dwcmmc1: interrupting on plic0 irq 75 [ 1.0000000] /gpio-restart at simplebus0 not configured [ 1.0000000] /soc/watchdog@13070000 at simplebus1 not configured [ 1.0000000] xhci1 at simplebus1: cannot switch 'otg' mode to host [ 1.0000000] /opp-table-0 at simplebus0 not configured [ 1.0000000] /soc/dma-controller@16050000 at simplebus1 not configured [ 1.0000000] /soc/phy@10200000 at simplebus1 not configured [ 1.0000000] /soc/syscon@13030000/clock-controller at syscon0 not configured [ 1.0000000] /soc/dma-controller@16008000 at simplebus1 not configured [ 1.0000000] /soc/clock-controller@19810000 at simplebus1 not configured [ 1.0000000] /soc/phy@19820000 at simplebus1 not configured [ 1.0000000] /soc/isp@19840000 at simplebus1 not configured [ 1.0000000] /soc/power-controller@17030000 at simplebus1 not configured [ 1.0000000] /soc/csi@19800000 at simplebus1 not configured [ 1.0000000] /sound at simplebus0 not configured [ 1.0000000] /soc/pwmdac@100b0000 at simplebus1 not configured [ 1.0000000] /audio-codec at simplebus0 not configured [ 1.0000000] /soc/timer@2000000 at simplebus1 not configured [ 1.0000000] /soc/spi@10060000 at simplebus1 not configured [ 1.0000000] /soc/pwm@120d0000 at simplebus1 not configured [ 1.0000000] /soc/spi@13010000 at simplebus1 not configured [ 1.0000000] /soc/crypto@16000000 at simplebus1 not configured [ 1.0000000] /gpio-restart at simplebus0 not configured [ 1.0000000] /soc/watchdog@13070000 at simplebus1 not configured [ 1.7799867] cpu_boot_secondary_processors: starting secondary processors [ 1.7909640] cpu_boot_secondary_processors: secondary processors hatched. 4 running [ 1.7909640] uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0 [ 1.7999867] uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0 [ 1.8099797] sdmmc0 at dwcmmc0 [ 1.8199807] sdmmc1 at dwcmmc1 [ 1.8299822] dk0 at ld4: "EFI", 163840 blocks at 32768, type: msdos [ 1.8399837] dk1 at ld4: "netbsd-root", 1953325056 blocks at 196608, type: ffs [ 1.9199790] sdmmc0: couldn't enable card: 60 [ 1.9599820] sdmmc1: SD card status: 4-bit, C10, U1 [ 1.9599820] ld1 at sdmmc1: <0x1b:0x534d:EB1QT:0x30:0x7aa053dd:0x134> [ 1.9700520] ld1: 30528 MB, 7753 cyl, 128 head, 63 sec, 512 bytes/sect x 62521344 sectors (0 bytes/physsect) [ 1.9899850] ld1: 4-bit width, High-Speed/SDR25, 50.000 MHz [ 2.2599790] uhub2 at uhub1 port 1: vendor 2109 (0x2109) USB2.0 Hub (0x3431), class 9/0, rev 2.10/4.20, addr 1 [ 2.2699810] uhub2: single transaction translator [ 2.6099800] swwdog0: software watchdog initialized [ 2.6205242] WARNING: 2 errors while detecting hardware; check system log. [ 2.6205242] boot device: dk1 [ 2.6312837] root on dk1 [ 2.6312837] mountroot: trying lfs... [ 2.6411720] mountroot: trying ffs... [ 2.6411720] root file system type: ffs [ 2.6499855] kern.module.path=/stand/riscv/11.99.3/modules [ 2.6499855] WARNING: no TOD clock present [ 2.6603587] WARNING: using filesystem time [ 2.6644262] WARNING: CHECK AND RESET THE DATE! [ 2.6699822] init: copying out path `/sbin/init' 11