Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-10-06 14:59:06
From: mochid
Description: NetBSD 10.1/aarch64 + edk2 on NanoPC -T6 LTS
DDR 9fa84341ce typ 24/09/06-09:51:11,fwver: v1.18
ch0 ttot10
ch1 ttot10
ch2 ttot10
ch3 ttot10
ch0 ttot18
LPDDR4X, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
ch1 ttot18
channel[1] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
ch2 ttot16
channel[2] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
ch3 ttot16
channel[3] BW=16 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=2048MB
Manufacturer ID:0x1
DQS rds:l0,h1
CH0 RX Vref:26.7%, TX Vref:18.8%,19.8%
DQ rds:l0 h1 h1 h1 h1 h1 h1 h2, h3 h1 h4 h4 h6 l1 h6 h7
DQS rds:h2,h3
CH1 RX Vref:26.7%, TX Vref:19.8%,18.8%
DQ rds:h4 h4 h2 h7 h4 h5 h2 h3, h3 l0 h2 h3 h5 h6 h5 h7
DQS rds:h2,h1
CH2 RX Vref:27.1%, TX Vref:20.8%,20.8%
DQ rds:h3 h2 h1 h3 h1 h1 h3 h1, l1 h1 h1 h5 h3 h3 h1 h3
DQS rds:l0,h1
CH3 RX Vref:26.3%, TX Vref:20.8%,19.8%
DQ rds:h1 h2 h2 h1 h4 h2 h1 l0, l0 l0 h3 l0 l1 h7 h1 h1
stride=0x2, ddr_config=0x4
hash ch_mask0-1 0x20 0x40, bank_mask0-3 0xa00 0x1400 0x2800 0x0, rank_mask0 0x401000
change to F1: 528MHz
ch0 ttot10
ch1 ttot10
ch2 ttot10
ch3 ttot10
change to F2: 1068MHz
ch0 ttot14
ch1 ttot14
ch2 ttot12
ch3 ttot12
change to F3: 1560MHz
ch0 ttot16
ch1 ttot16
ch2 ttot14
ch3 ttot14
change to F0: 2112MHz
ch0 ttot18
ch1 ttot18
ch2 ttot18
ch3 ttot18
out
U-Boot SPL board init
U-Boot SPL 2017.09-g5f53abfa1e-221223 #zzz (Dec 26 2022 - 09:10:09)
Trying to boot from MMC2
MMC: no card present
mmc_init: -123, time 0
spl: mmc init failed with error: -123
Trying to boot from MMC1
No misc partition
Trying fit image at 0x800 sector
## Verified-boot: 0
## Checking atf-1 0x00040000 ... sha256(abe912bc01...) + OK
## Checking edk2 0x00200000 ... sha256(2c93048f0f...) + OK
## Checking atf-2 0x000f0000 ... sha256(e3b0c44298...) + OK
## Checking atf-3 0xff100000 ... sha256(f6c21c7eec...) + OK
## Checking optee 0x08400000 ... sha256(66e4b7a4cd...) + OK
## Checking nvdata 0x007c0000 ... OK
Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)
Total: 549.163 ms
NOTICE: BL31: v2.12.0(release):d5c68fd
NOTICE: BL31: Built : 22:03:11, Apr 9 2025
UEFI firmware (version v1.1 built at 22:04:55 on Apr 9 2025)
\\-__,------,___.
\\ __,---` NetBSD/evbarm efiboot (arm64)
\\ `---,_. Revision 2.13 (Wed Sep 24 12:41:45 UTC 2025)
\\-,_____,.---`
\\
\\
\\
1. Norm root=NAME=nbroot0
2. Single user
3. netbsd -c
4. netbsd.d
5. Command line
Choose an option; RETURN for default; SPACE to stop countdown.
Option 1 will be chosen in 0 seconds.
7642880+3475816+4195816+1768056 [601079+954912+712912]=0x13daa58
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
[ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
[ 1.0000000] 2024, 2025
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All rights reserved.
[ 1.0000000] NetBSD 10.1_STABLE (GENERIC64) #0: Wed Sep 24 12:41:45 UTC 2025
[0] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/evbarm/compile/GENERIC64
[ 1.0000000] total memory = 7885 MB
[ 1.0000000] avail memory = 7598 MB
[ 1.0000000] entropy: ready
[ 1.0000000] armfdt0 (root)
[ 1.0000000] armfdt0: using EFI runtime services for RTC
[ 1.0000000] simplebus0 at armfdt0: FriendlyElec NanoPC T6
[ 1.0000000] simplebus1 at simplebus0
[ 1.0000000] acpifdt0 at simplebus0
[ 1.0000000] acpifdt0: SMBIOS rev. 3.3.0 @ 0xefe50000
[ 1.0000000] ACPI: RSDP 0x00000000EEDA1018 000024 (v02 RKCP )
[ 1.0000000] ACPI: XSDT 0x00000000EEDA1F18 000064 (v01 RKCP RK3588 00000000 01000013)
[ 1.0000000] ACPI0000EEDA1C18 000114 (v06 RKCP RK3588 00000000 EDK2 00000000)
[ 1.0000000] ACPI: DSDT 0x00000000EE2F4018 0035F7 (v02 RKCP RK3588 00000002 INTL 20230628)
[ 1.0000000] ACPI: DBG2 0x00000000EEDA1B18 00005C (v00 RKCP RK3588 00000000 EDK2 00000000)
[ 1.0000000] ACPI: GTDT 0x00000000EEDA1D98 000060 (v02 RKCP RK3588 00000000 EDK2 00000000)
[ 1.0000000] ACPI: APIC 0x00000000EEDA1098 0002D4 (v04 RKCP RK3588 00000000 EDK2 00000000)
[ 1.0000000] ACPI: MCFG 0x00000000EEDA1498 00007C (v01 RKCP RK3588 00000000 EDK2 00000000)
[ 1.0000000] ACPI: PPTT 0x00000000EEDA1598 000220 (v01 RKCP RK3588 00000000 EDK2 00000000)
[ 1.0000000] ACPI: SPCR 0x00000000EEDA1E98 000050 (v02 RKCP RK3588 00000000 EDK2 00000000)
[ 1.0000000] ACPI: BGRT 0x00000000EEDA1818 000038 (v01 INTEL EDK2 00000002 01000013)
[ 1.0000000] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 1.0000000] acpi0 at acpifdt0: Intel ACPICA 20221020
[ 1.0000000] cpu0 at acpi0: Arm Cortex-A55 r2p0 (v8.2-A+), id 0x0
[ 1.0000000] cpu0: package 0, core 0, smt 0
[ 1.0000000] cpu1 at acpi0: Arm Cortex-A55 r2p0 (v8.2-A+), id 0x100
[ 1.0000000] cpu1: package 0, core 1, smt 0
[ 1.0000000] cpu2 at acpi0: Arm Cortex-A55 r2p0 (v8.2-A+), id 0x200
[ 1.0000000] cpu2: package 0, core 2, smt 0
[ 1.0000000] cpu3 at acpi0: Arm Cortex-A55 r2p0 (v8.2-A+), id 0x300
[ 1.0000000] cpu3: package 0, core 3, smt 0
[ 1.0000000] cpu4 at acpi0: Arm Cortex-A76 r4p0 (v8.2-A+), id 0x400
[ 1.0000000] cpu4: package 0, core 4, smt 0
[ 1.0000000] cpu5 at acpi0: Arm Cortex-A76 r4p0 (v8.2-A+), id 0x500
[ 1.0000000] cpu5: package 0, core 5, smt 0
[ 1.0000000] cpu6 at acpi0: Arm Cortex-A76 r4p0 (v8.2-A+), id 0x600
[ 1.0000000] cpu6: package 0, core 6, smt 0
[ 1.0000000] cpu7 at acpi0: Arm Cortex-A76 r4p0 (v8.2-A+), id 0x700
[ 1.0000000] cpu7: package 0, core 7, smt 0
[ 1.0000000] gicvthree0 at acpi0: GICv3
[ 1.0000000] gtmr0 at acpi0: irq 27
[ 1.0000000] armgtmr0 at gtmr0: Generic Timer (24000 kHz, virtual)
[ 1.0000040] SCMI (PNP0C02) at acpi0 not configured
[ 1.0000040] acpipcd0 at acpi0 (PKG0, ACPI0010-8): Processor Container Device
[ 1.0000040] acpipcd1 at acpi0 (CLU0, ACPI0010-9): Processor Container Device
[ 1.0000040] CPU0 (ACPI0007) at acpi0 not configured
[ 1.0000040] CPU1 (ACPI0007) at acpi0 not configured
[ 1.0000040] CPU2 (ACPI0007) at acpi0 not configured
[ 1.0000040] CPU3 (ACPI0007) at acpi0 not configured
[ 1.0000040] acpipcd2 at acpi0 (CLU1, ACPI0010-10): Processor Container Device
[ 1.0000040] CPU4 (ACPI0007) at acpi0 not configured
[ 1.0000040] CPU5 (ACPI0007) at acpi0 not configured
[ 1.0000040] acpipcd3 at acpi0 (CLU2, ACPI0010-11): Processor Container Device
[ 1.0000040] CPU6 (ACPI0007) at acpi0 not configured
[ 1.0000040] CPU7 (ACPI0007) at acpi0 not configured
[ 1.0000040] acpipchb0 at acpi0 (PCI0, PNP0A08-0): PCI Express Host Bridge
[ 1.0000040] pci0 at acpipchb0 bus 1
[ 1.0000040] nvme0 at pci0 dev 0 function 0: vendor 1d79 product 2263 (rev. 0x03)
[ 1.0000040] nvme0: NVMe 1.3
[ 1.0000040] nvme0: interrupting at irq 292
[ 1.0000040] nvme0: TS256GMTE400S, firmware X0912T3, serial J611520130
[ 1.0000040] ld4 at nvme0 nsid 1
[ 1.0000040] ld4: 238 GB, 31130 cyl, 255 head, 63 sec, 512 bytes/sect x 500118192 sectors
[ 1.0000040] RES0 (AMZN0001) at acpi0 not configured
[ 1.0000040] RES1 (PNP0C02) at acpi0 not configured
[ 1.0000040] acpipchb1 at acpi0 (PCI2, PNP0A08-2): PCI Express Host Bridge
[ 1.0000040] pci1 at acpipchb1 bus 1
[ 1.0000040] rge0 at pci1 dev 0 function 0: vendor 10ec product 8125 (rev. 0x05)
[ 1.0000040] rge0: interrupting at irq 272
[ 1.0000040] rge0: Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000040] acpipchb2 at acpi0 (PCI3, PNP0A08-3): PCI Express Host Bridge
[ 1.0000040] pci2 at acpipchb2 bus 1
[ 1.0000040] acpipchb3 at acpi0 (PCI4, PNP0A08-4): PCI Express Host Bridge
[ 1.0000040] pci3 at acpipchb3 bus 1
[ 1.0000040] rge1 at pci3 dev 0 function 0: vendor 10ec product 8125 (rev. 0x05)
[ 1.0000040] rge1: interrupting at irq 282
[ 1.0000040] rge1: Ethernet address [_MAC_XXXXXXXXXX]
[ 1.0000040] sdhc0 at acpi0 (SDC3, RKCP0D40-3): mem 0xfe2e0000-0xfe2effff irq 237
[ 1.0000040] sdhc0: SDHC 4.2, rev 0, 32-bit ADMA2, 200000 kHz, HS SDR50 DDR50 SDR104 HS200 3.0V, re-tuning mode 1, 1024 byte blocks
[ 1.0000040] sdmmc0 at sdhc0 slot 0
[ 1.0000040] SDHC (RKCPFE2C) at acpi0 not configured
[ 1.0000040] DMA0 (ARMH0330) at acpi0 not configured
[ 1.0000040] DMA1 (ARMH0330) at acpi0 not configured
[ 1.0000040] DMA2 (ARMH0330) at acpi0 not configured
[ 1.0000040] GPI0 (RKCP3002) at acpi0 not configured
[ 1.0000040] GPI1 (RKCP3002) at acpi0 not configured
[ 1.0000040] GPI2 (RKCP3002) at acpi0 not configured
[ 1.0000040] GPI3 (RKCP3002) at acpi0 not configured
[ 1.0000040] GPI4 (RKCP3002) at acpi0 not configured
[ 1.0000040] PINC (PRP0001) at acpi0 not configured
[ 1.0000040] I2C1 (RKCP3001) at acpi0 not configured
[ 1.0000040] I2C2 (RKCP3001) at acpi0 not configured
[ 1.0000040] I2C3 (RKCP3001) at acpi0 not configured
[ 1.0000040] I2C4 (RKCP3001) at acpi0 not configured
[ 1.0000040] I2C5 (RKCP3001) at acpi0 not configured
[ 1.0000040] I2C6 (RKCP3001) at acpi0 not configured
[ 1.0000040] I2C7 (RKCP3001) at acpi0 not configured
[ 1.0000040] I2C8 (RKCP3001) at acpi0 not configured
[ 1.0000040] com0 at acpi0 (UAR2, HISI0031-2): mem 0xfeb50000-0xfeb50fff irq 365
[ 1.0000040] com: DesignWare APB UART, 64-byte FIFO
[ 1.0000040] com0: console
[ 1.0000040] I2S0 (RKCP3003) at acpi0 not configured
[ 1.0000040] ehci0 at acpi0 (EHC0, RKCP0D20-0): mem 0xfc800000-0xfc83ffff irq 247
[ 1.0000040] ehci0: 1 companion controller, 1 port
[ 1.0000040] ehci0: Using DMA subregion for control data structures
[ 1.0000040] usb0 at ehci0: USB revision 2.0
[ 1.0000040] ehci1 at acpi0 (EHC1, RKCP0D20-1): mem 0xfc880000-0xfc8bffff irq 250
[ 1.0000040] ehci1: 1 companion controller, 1 port
[ 1.0000040] ehci1: Using DMA subregion for control data structures
[ 1.0000040] usb1 at ehci1: USB revision 2.0
[ 1.0000040] ohci0 at acpi0 (OHC0, PRP0001-0): mem 0xfc840000-0xfc87ffff irq 248
[ 1.0000040] ohci0: OHCI version 1.0
[ 1.0000040] usb2 at ohci0: USB revision 1.0
[ 1.0000040] ohci1 at acpi0 (OHC1, PRP0001-1): mem 0xfc8c0000-0xfc8fffff irq 251
[ 1.0000040] ohci1: OHCI version 1.0
[ 1.0000040] usb3 at ohci1: USB revision 1.0
[ 1.0000040] xhci0 at acpi0 (XHC0, PNP0D10-0): mem 0xfc000000-0xfc3fffff irq 252
[ 1.0000040] usb4 at xhci0: USB revision 3.0
[ 1.0000040] usb5 at xhci0: USB revision 2.0
[ 1.0000040] xhci1 at acpi0 (XHC1, PNP0D10-1): mem 0xfc400000-0xfc7fffff irq 253
[ 1.0000040] usb6 at xhci1: USB revision 3.0
[ 1.0000040] usb7 at xhci1: USB revision 2.0
[ 1.0000040] genfb0 at simplebus1: Simple Framebuffer (640x480 32-bpp @ 0xede30000)
[ 1.0000040] wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
[ 1.5451375] uhub0 at usb4: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
[ 1.5451375] uhub1 at usb5: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
[ 1.5451375] uhub2 at usb6: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
[ 1.5451375] uhub3 at usb7: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
[ 1.5451375] cpu0: PMU interrupting on irq 23
[ 1.5451375] dk0 at ld4: "uboot", 16384 blocks at 2048, type: ext2fs
[ 1.5451375] dk1 at ld4: "dummy", 47104 blocks at 18432, type: ext2fs
[ 1.5451375] dk2 at ld4: "ESP", 614400 blocks at 65536, type: msdos
[ 1.5451375] dk3 at ld4: "nbroot0", 4194304 blocks at 679936, type: ffs
[ 1.5451375] dk4 at ld4: "nbvar0", 16777216 blocks at 4874240, type: ffs
dk5 at ld4: "nbvol1", 478466703 blocks at 21651456, type: ffs
[ 1.5651380] uhub4 at usb1: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[ 1.5651380] uhub5 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
[ 1.5651380] uhub6 at usb3: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[ 1.5651380] uhub7 at usb2: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
[ 1.6851407] sdmmc0: couldn't enable card: 1
[ 2.6351624] uhub8 at uhub4 port 1: vendor 0424 (0x0424) product 2514 (0x2514), class 9/0, rev 2.00/b.b3, addr 2
[ 2.6351624] uhub8: multiple transaction translators
[ 2.9751702] swwdog0: software watchdog initialized
[ 2.9851705] WARNING: 1 error while detecting hardware; check system log.
[ 2.9851705] boot device: dk3
[ 2.9851705] root on dk3
[ 2.9851705] root file system type: ffs
[ 2.9851705] kern.module.path=/stand/evbarm/10.1/modules
copying /etc0 to /etc..
Mon Oct 6 22:59:37 JST 2025
Starting root file system check:
/dev/rdk3: file system is clean; not checking
/etc/rc: WARNING: $optlink is not set properly - see rc.conf(5).
Setting sysctl variables:
Starting file system checks:
/dev/rdk4: file system is clean; not checking
/dev/rdk5: file system is clean; not checking
Loaded entropy from /var/db/entropy-file.
Waiting for entropy...done
Setting tty flags.