Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-11-01 16:36:01
From: d-ra
Description: Fujitsu Siemens Lifebook E-Series
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
2024
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 10.1 (GENERIC) #8: Mon Sep 1 19:14:31 CEST 2025
[_EMAIL_XXX]:/usr/src/sys/arch/i386/compile/GENERIC
total memory = 255 MB
avail memory = 228 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
ACPI: RSDP 0x00000000000F66B0 000014 (v00 FUJ )
ACPI: RSDT 0x000000000FFEB691 000028 (v01 FUJ BISCAYNE 01360000 FUJ 00001000)
ACPI: FACP 0x000000000FFEFB8C 000074 (v01 FUJ BISCAYNE 01360000 FUJ 00001000)
ACPI: DSDT 0x000000000FFEB6B9 0044D3 (v01 FUJ BISCAYNE 01360000 MSFT 01000007)
ACPI: FACS 0x000000000FFEFFC0 000040
ACPI: 1 ACPI AML tables successfully acquired and loaded
ACPI: BIOS is too old (19991130). Set acpi_force_load to use.
ACPI Error: Could not remove SCI handler (20221020/evmisc-316)
cpu0 at mainbus0
ACPI Error: AE_BAD_PARAMETER, Thread 3243113152 could not acquire Mutex [ACPI_MTX_Tables] (0x2) (20221020/utmutex-326)
ACPI Error: Mutex [ACPI_MTX_Tables] (0x2) is not acquired, cannot release (20221020/utmutex-367)
cpu0: Use cpuid to serialize rdtsc
cpu0: Intel 686-class, 743MHz, id 0x686
cpu0: node 0, package 0, core 0, smt 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: This pci host supports neither MSI nor MSI-X.
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel 82443BX Host Bridge/Controller (rev. 0x03)
agp0 at pchb0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x03)
pci1 at ppb0 bus 1
pci1: This pci host supports neither MSI nor MSI-X.
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: ATI Technologies Rage Mobility (rev. 0x64)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
pcib0 at pci0 dev 7 function 0: Intel 82371AB (PIIX4) PCI-ISA Bridge (rev. 0x02)
piixide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 7 function 2: Intel 82371AB (PIIX4) USB Host Controller (rev. 0x01)
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
piixpm0 at pci0 dev 7 function 3: Intel 82371AB (PIIX4) Power Management Controller (rev. 0x03)
timecounter: Timecounter "piixpm0" frequency 3579545 Hz quality 1000
piixpm0: 24-bit timer
piixpm0: interrupting at SMI,
iic0 at piixpm0 port 0: I2C bus
esm0 at pci0 dev 13 function 0: ESS Technology Maestro 2E PCI Audio Accelerator (rev. 0x10)
esm0: interrupting at irq 9
esm0: esm_read_codec() RW_DONE timed out.
esm0: will perform cold reset.
esm0: ac97: SigmaTel STAC9721/23 codec; 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at esm0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
cbb0 at pci0 dev 15 function 0: Ricoh 5C476 PCI-CardBus Bridge (rev. 0x80)
cbb1 at pci0 dev 15 function 1: Ricoh 5C476 PCI-CardBus Bridge (rev. 0x80)
fxp0 at pci0 dev 16 function 0: i82559 Ethernet (rev. 0x08)
fxp0: interrupting at irq 9
fxp0: Ethernet address [_MAC_XXXXXXXXXX]
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16-byte FIFO
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pms0: ALPS PS/2 V2 pointing device
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
attimer0: attached to pcppi0
cbb0: cacheline 0x0 lattimer 0x40
cbb0: bhlc 0x824000
cbb0: autoconfiguration error: secondary bus number uninitialized; try PCI_BUS_FIXUP
cbb0: interrupting at irq 9
cardslot0 at cbb0
pcmcia0 at cardslot0
cbb1: cacheline 0x0 lattimer 0x40
cbb1: bhlc 0x824000
cbb1: autoconfiguration error: secondary bus number uninitialized; try PCI_BUS_FIXUP
cbb1: interrupting at irq 9
cardslot1 at cbb1
pcmcia1 at cardslot1
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
IPsec: Initialized Security Association Processing.
uhub0 at usb0: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
wd0 at atabus0 drive 0
wd0: <SAMSUNG HM160HC>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <QSI CD-RW/DVD-ROM SBW-241, , VU02> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
swwdog0: software watchdog initialized
WARNING: 2 errors while detecting hardware; check system log.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/i386/10.1/modules
WARNING: clock gained 16 days
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)