Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-11-02 10:43:29
From: he
Description: NetBSD 11.0_BETA on Sun Netra T1 200
[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.000000] 2024, 2025 [ 1.000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 11.0_BETA (GENERIC) #0: Tue Oct 28 15:00:36 UTC 2025 [ 1.000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/sparc64/compile/GENERIC [ 1.000000] total memory = 1024 MB [ 1.000000] avail memory = 983 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] Kernelized RAIDframe activated [ 1.000000] mainbus0 (root): SUNW,UltraAX-i2 (Netra T1 200): [_HOSTID_XXXXX] [ 1.000000] cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 500 MHz, CPU id 0 [ 1.000000] cpu0: manuf 17, impl 13, mask 14 [ 1.000000] cpu0: system tick frequency 11.111 MHz [ 1.000000] cpu0: 16K instruction (32 b/l), 16K data (32 b/l), 256K external (64 b/l) [ 1.000000] psycho0 at mainbus0 [ 1.000000] psycho0: SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 2; PCI bus 0 [ 1.000000] psycho_alloc_extent: no "available" property [ 1.000000] psycho_alloc_extent: no "available" property [ 1.000000] pci0 at psycho0 [ 1.000000] pci0: i/o space, memory space enabled [ 1.000000] ppb0 at pci0 dev 1 function 1: Sun Microsystems Simba PCI Bridge (rev. 0x13) [ 1.000000] pci1 at ppb0 bus 1 [ 1.000000] pci1: i/o space, memory space enabled [ 1.000000] ebus0 at pci1 dev 12 function 0: Sun Microsystems PCIO Ebus2 (US III), revision 0x01 [ 1.000000] flashprom at ebus0 addr 0-fffff not configured [ 1.000000] clock0 at ebus0 addr 0-1fff: mk48t59 [ 1.000000] autoconfiguration error: ebus_attach: idprom: incomplete [ 1.000000] lom0 at ebus0 addr 200000-200003 ipl 2a: SUNW,lomh: LOMlite2 rev 3.10 [ 1.000000] lom0: 4 fan(s), 1 PSU(s), 1 temp sensor(s) [ 1.000000] lom0: Watchdog timer configured. [ 1.000000] alipm0 at pci1 dev 3 function 0: 74KHz clock [ 1.000000] iic0 at alipm0: I2C bus [ 1.000000] admtemp0 at iic0 addr 0x18: MAX1617A temperature sensor: id. 0x41, rev. 0x34 [ 1.000000] spdmem0 at iic0 addr 0x54 [ 1.000000] spdmem0: SDRAM (registered), data ECC, 256MB, 133MHz (PC-133) [ 1.000000] spdmem0: 12 rows, 11 cols, 1 banks, 4 banks/chip, 7.5ns cycle time [ 1.000000] spdmem0: tAA-tRCD-tRP-tRAS: 3-20-20-45 [ 1.000000] spdmem0: voltage LvTTL (not 5V tolerant), refresh time 15.625us (self-refreshing) [ 1.000000] spdmem1 at iic0 addr 0x55 [ 1.000000] spdmem1: SDRAM (registered), data ECC, 256MB, 133MHz (PC-133) [ 1.000000] spdmem1: 12 rows, 11 cols, 1 banks, 4 banks/chip, 7.5ns cycle time [ 1.000000] spdmem1: tAA-tRCD-tRP-tRAS: 3-20-20-45 [ 1.000000] spdmem1: voltage LvTTL (not 5V tolerant), refresh time 15.625us (self-refreshing) [ 1.000000] spdmem2 at iic0 addr 0x56 [ 1.000000] spdmem2: SDRAM (registered), data ECC, 256MB, 143MHz (PC-133) [ 1.000000] spdmem2: 12 rows, 11 cols, 1 banks, 4 banks/chip, 7.0ns cycle time [ 1.000000] spdmem2: tAA-tRCD-tRP-tRAS: 3-15-15-45 [ 1.000000] spdmem2: voltage LvTTL (not 5V tolerant), refresh time 15.625us (self-refreshing) [ 1.000000] spdmem3 at iic0 addr 0x57 [ 1.000000] spdmem3: SDRAM (registered), data ECC, 256MB, 143MHz (PC-133) [ 1.000000] spdmem3: 12 rows, 11 cols, 1 banks, 4 banks/chip, 7.0ns cycle time [ 1.000000] spdmem3: tAA-tRCD-tRP-tRAS: 3-15-15-45 [ 1.000000] spdmem3: voltage LvTTL (not 5V tolerant), refresh time 15.625us (self-refreshing) [ 1.000000] seeprom0 at iic0 addr 0x50: i2c-nvram: size 8192 [ 1.000000] seeprom1 at iic0 addr 0x51: motherboard-fru: size 8192 [ 1.000000] ebus1 at pci1 dev 7 function 0: Acer Labs M1533 PCI-ISA Bridge, revision 0x00 [ 1.000000] power at ebus1 addr 2000-2007 ipl 25 not configured [ 1.000000] com0 at ebus1 addr 3f8-3ff ipl 2b: ns16550a, 16-byte FIFO [ 1.000000] com0: console [ 1.000000] com1 at ebus1 addr 2e8-2ef ipl 2b: ns16550a, 16-byte FIFO [ 1.000000] gem0 at pci1 dev 12 function 1: Sun Microsystems ERI Ethernet (rev. 0x01) [ 1.000000] gem0: interrupting at ivec 3006 [ 1.000000] ukphy0 at gem0 phy 1: OUI 0x0008bb, model 0x0002, rev. 1 [ 1.000000] ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.000000] gem0: Ethernet address [_MAC_XXXXXXXXXX], 2KB RX fifo, 2KB TX fifo [ 1.000000] ohci0 at pci1 dev 12 function 3: Sun Microsystems USB Controller (rev. 0x01) [ 1.000000] ohci0: interrupting at ivec 24 [ 1.000000] ohci0: OHCI version 1.0, legacy support [ 1.000000] usb0 at ohci0: USB revision 1.0 [ 1.000000] aceride0 at pci1 dev 13 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc3) [ 1.000000] aceride0: bus-master DMA support present [ 1.000000] aceride0: using PIO transfers above 137GB as workaround for 48bit DMA access bug, expect reduced performance [ 1.000000] aceride0: primary channel configured to native-PCI mode [ 1.000000] aceride0: using ivec 280c for native-PCI interrupt [ 1.000000] atabus0 at aceride0 channel 0 [ 1.000000] aceride0: secondary channel configured to native-PCI mode [ 1.000000] atabus1 at aceride0 channel 1 [ 1.000000] gem1 at pci1 dev 5 function 1: Sun Microsystems ERI Ethernet (rev. 0x01) [ 1.000000] gem1: interrupting at ivec 301c [ 1.000000] ukphy1 at gem1 phy 1: OUI 0x0008bb, model 0x0002, rev. 1 [ 1.000000] ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto [ 1.000000] gem1: Ethernet address [_MAC_XXXXXXXXXX], 2KB RX fifo, 2KB TX fifo [ 1.000000] ohci1 at pci1 dev 5 function 3: Sun Microsystems USB Controller (rev. 0x01) [ 1.000000] ohci1: interrupting at ivec 26 [ 1.000000] ohci1: OHCI version 1.0, legacy support [ 1.000000] usb1 at ohci1: USB revision 1.0 [ 1.000000] ppb1 at pci0 dev 1 function 0: Sun Microsystems Simba PCI Bridge (rev. 0x13) [ 1.000000] pci2 at ppb1 bus 2 [ 1.000000] pci2: i/o space, memory space enabled [ 1.000000] esiop0 at pci2 dev 8 function 0: Symbios Logic 53c896 (ultra2-wide scsi) [ 1.000000] esiop0: using on-board RAM [ 1.000000] esiop0: interrupting at ivec 2820 [ 1.000000] scsibus0 at esiop0: 16 targets, 8 luns per target [ 1.000000] esiop1 at pci2 dev 8 function 1: Symbios Logic 53c896 (ultra2-wide scsi) [ 1.000000] esiop1: using on-board RAM [ 1.000000] esiop1: interrupting at ivec 2820 [ 1.000000] scsibus1 at esiop1: 16 targets, 8 luns per target [ 1.000000] puc0 at pci2 dev 5 function 0: VScom PCI-800H (com, com, com, com) [ 1.000000] com2 at puc0 port 0 (16950-compatible): interrupting at ivec 15 [ 1.000000] com2: ns16550a, 16-byte FIFO [ 1.000000] com3 at puc0 port 1 (16950-compatible): interrupting at ivec 15 [ 1.000000] com3: ns16550a, 16-byte FIFO [ 1.000000] com4 at puc0 port 2 (16950-compatible): interrupting at ivec 15 [ 1.000000] com4: ns16550a, 16-byte FIFO [ 1.000000] com5 at puc0 port 3 (16950-compatible): interrupting at ivec 15 [ 1.000000] com5: ns16550a, 16-byte FIFO [ 1.000000] puc1 at pci2 dev 5 function 1: VScom PCI-800H (com, com, com, com) [ 1.000000] com6 at puc1 port 0 (16950-compatible): interrupting at ivec 15 [ 1.000000] com6: ns16550a, 16-byte FIFO [ 1.000000] com7 at puc1 port 1 (16950-compatible): interrupting at ivec 15 [ 1.000000] com7: ns16550a, 16-byte FIFO [ 1.000000] com8 at puc1 port 2 (16950-compatible): interrupting at ivec 15 [ 1.000000] com8: ns16550a, 16-byte FIFO [ 1.000000] com9 at puc1 port 3 (16950-compatible): interrupting at ivec 15 [ 1.000000] com9: ns16550a, 16-byte FIFO [ 1.000000] pcons at mainbus0 not configured [ 1.000000] WARNING: system needs entropy for security; see entropy(7) [ 1.000000] timecounter: Timecounter "tick-counter" frequency 500000000 Hz quality 100 [ 1.000003] timecounter: Timecounter "stick-counter" frequency 11111111 Hz quality 200 [ 1.000040] No counter-timer -- using STICK at 11.111MHz as system clock. [ 1.000040] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.100023] scsibus0: waiting 2 seconds for devices to settle... [ 1.173020] scsibus1: waiting 2 seconds for devices to settle... [ 1.260044] uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.375326] uhub0: 4 ports with 4 removable, self powered [ 1.375326] uhub1 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 1.483500] uhub1: 4 ports with 4 removable, self powered [ 3.410016] sd0 at scsibus0 target 0 lun 0: <FUJITSU, MAN3735MC, 0111> disk fixed [ 3.502693] sd0: 70092 MB, 29902 cyl, 8 head, 600 sec, 512 bytes/sect x 143550456 sectors [ 3.610021] sd0: sync (25.00ns offset 31), 16-bit (80.000MB/s) transfers, tagged queueing [ 3.710022] sd1 at scsibus0 target 1 lun 0: <SEAGATE, ST3146855LC, 0003> disk fixed [ 3.804745] sd1: 136 GB, 74340 cyl, 4 head, 964 sec, 512 bytes/sect x 286749488 sectors [ 3.910021] sd1: sync (25.00ns offset 31), 16-bit (80.000MB/s) transfers, tagged queueing [ 4.970016] atapibus0 at atabus0: 2 targets [ 5.020017] cd0 at atapibus0 drive 0: <LG DVD-ROM DRN-8080B, 2001/07/31, 4.03> cdrom removable [ 5.130496] cd0: drive supports PIO mode 4, DMA mode 2 [ 5.130496] cd0(aceride0:0:0): using PIO mode 4 [ 12.360010] swwdog0: software watchdog initialized [ 12.420010] WARNING: 1 error while detecting hardware; check system log. [ 12.500007] root on sd0a dumps on sd0b [ 12.550008] root file system type: ffs [ 12.598385] entropy: best effort [ 12.636873] kern.module.path=/stand/sparc64/11.0/modules [ 14.960011] entropy: ready