Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-11-17 08:54:04
From: root
Description: FreeBSD/amd64 on LG Electronics Z360-G.BG71P1
---<<BOOT>>--- Copyright (c) 1992-2023 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.1-RELEASE-p2 NOMADBSD amd64 FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) VT(efifb): resolution 1920x1080 module_register: cannot register pci/re from kernel; already loaded from if_re.ko Module pci/re failed to register: 17 module_register: cannot register re/miibus from kernel; already loaded from if_re.ko Module re/miibus failed to register: 17 CPU: Intel(R) Core(TM) i7-3537U CPU @ 2.00GHz (2494.46-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7dbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8135913472 (7759 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <LGE LGPC > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 Launching APs: 1 2 3 random: entropy device external interface kbd1 at kbdmux0 efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s smbios0: <System Management BIOS> at iomem 0xdac46000-0xdac4601e smbios0: Version: 2.7, BCD Revision: 2.7 aesni0: No AES or SHA support. acpi0: <LGE LGPC> acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0xf0000000-0xf03fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf1600000-0xf160ffff at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 hdac0: <Intel Panther Point HDA Controller> mem 0xf1610000-0xf1613fff at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 iwn0: <Intel Centrino Advanced 6235> mem 0xf0d00000-0xf0d01fff at device 0.0 on pci1 pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0 pci2: <ACPI PCI bus> on pcib2 re0: <RealTek 810xE PCIe 10/100baseTX> port 0x2000-0x20ff mem 0xf0c04000-0xf0c04fff,0xf0c00000-0xf0c03fff at device 0.0 on pci2 re0: Using 1 MSI-X message re0: ASPM disabled re0: Chip rev. 0x40800000 re0: MAC rev. 0x00200000 miibus0: <MII bus> on re0 rlphy0: <RTL8201E 10/100 media interface> PHY 1 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf1619000-0xf16193ff at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Panther Point AHCI SATA controller> port 0x4098-0x409f,0x40bc-0x40bf,0x4090-0x4097,0x40b8-0x40bb,0x4060-0x407f mem 0xf1618000-0xf16187ff at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0. psm0: model Elantech Touchpad, device ID 0 battery0: <ACPI Control Method Battery> on acpi0 acpi_button1: <Sleep Button> on acpi0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff pnpid ORM0000 on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 sysctl_warn_reuse: can't re-use a leaf (hw.acpi.cpu.cppc_notify)! Timecounter "TSC-low" frequency 1247166905 Hz quality 1000 Timecounters tick every 1.000 msec ugen0.1: <Intel XHCI root HUB> at usbus0 ugen1.1: <Intel EHCI root HUB> at usbus1 uhub0 on usbus0 uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub1 on usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC269 (Internal Analog)> at nid 20 and 24 on hdaa0 pcm1: <Realtek ALC269 (Left Analog Headphones)> at nid 33 on hdaa0 hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0 hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1 pcm2: <Intel Panther Point (HDMI/DP 8ch)> at nid 6 on hdaa1 Trying to mount root from zfs:nomadbsd_zroot/ROOT/default []... ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <SK hynix SC210 mSATA 256GB 20001L00> ATA8-ACS SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 244198MB (500118192 512 byte sectors) ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 uhub0: 8 ports with 8 removable, self powered Root mount waiting for: usbus0 usbus1 uhub1: 3 ports with 3 removable, self powered ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 uhub2 on uhub1 uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device SanDisk Cruzer Blade (0x0781:0x5567) usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device SanDisk Cruzer Blade (0x0781:0x5567) ugen0.2: <SanDisk Cruzer Blade> at usbus0 umass0 on uhub0 umass0: <SanDisk Cruzer Blade, class 0/0, rev 2.00/1.27, addr 1> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x8100 umass0:4:0: Attached to scbus4 da0 at umass-sim0 bus 0 scbus4 target 0 lun 0 da0: <SanDisk Cruzer Blade 1.27> Removable Direct Access SPC-4 SCSI device da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX] da0: 40.000MB/s transfers da0: 14971MB (30660608 512 byte sectors) da0: quirks=0x2<NO_6_BYTE> Root mount waiting for: usbus0 usbus1 ugen0.3: <vendor 0x8087 product 0x07da> at usbus0 uhub2: 8 ports with 8 removable, self powered Root mount waiting for: usbus0 usbus1 ugen0.4: <Realtek USB3.0 Card Reader> at usbus0 umass1 on uhub0 umass1: <Realtek USB3.0 Card Reader, class 0/0, rev 3.00/1.28, addr 3> on usbus0 umass1: SCSI over Bulk-Only; quirks = 0x4000 umass1:5:1: Attached to scbus5 da1 at umass-sim1 bus 1 scbus5 target 0 lun 0 da1: <Generic- USB3.0 CRW -SD 1.00> Removable Direct Access SPC-2 SCSI device da1: 400.000MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present da1: quirks=0x2<NO_6_BYTE> ugen1.3: <LG HD WebCam LG HD WebCam> at usbus1 da2 at umass-sim1 bus 1 scbus5 target 0 lun 1 da2: <Generic- USB3.0 CRW -SD 1.00> Removable Direct Access SPC-2 SCSI device da2: 400.000MB/s transfers da2: Attempt to query device size failed: NOT READY, Medium not present da2: quirks=0x2<NO_6_BYTE> Cuse v0.1.37 @ /dev/cuse ichsmb0: <Intel Panther Point SMBus controller> port 0xefa0-0xefbf mem 0xf1614000-0xf16140ff at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: Embedded MOF found ACPI: \134_SB.PCI0.LPCB.EC.MAP1.WQAC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) re0: link state changed to DOWN lo0: link state changed to UP ubt0 on uhub0 ubt0: <vendor 0x8087 product 0x07da, class 224/1, rev 2.00/78.69, addr 2> on usbus0 Security policy loaded: MAC/ntpd (mac_ntpd) [drm] Got Intel graphics stolen memory base 0xdba00000, size 0x4000000 drmn0: <drmn> on vgapci0 vgapci0: child drmn0 requested pci_enable_io vgapci0: child drmn0 requested pci_enable_io lkpi_iic0: <LinuxKPI I2C> on drmn0 iicbus0: <Philips I2C bus> on lkpi_iic0 iic0: <I2C generic I/O> on iicbus0 lkpi_iic1: <LinuxKPI I2C> on drmn0 iicbus1: <Philips I2C bus> on lkpi_iic1 iic1: <I2C generic I/O> on iicbus1 lkpi_iic2: <LinuxKPI I2C> on drmn0 iicbus2: <Philips I2C bus> on lkpi_iic2 iic2: <I2C generic I/O> on iicbus2 lkpi_iic3: <LinuxKPI I2C> on drmn0 iicbus3: <Philips I2C bus> on lkpi_iic3 iic3: <I2C generic I/O> on iicbus3 lkpi_iic4: <LinuxKPI I2C> on drmn0 iicbus4: <Philips I2C bus> on lkpi_iic4 iic4: <I2C generic I/O> on iicbus4 lkpi_iic5: <LinuxKPI I2C> on drmn0 iicbus5: <Philips I2C bus> on lkpi_iic5 iic5: <I2C generic I/O> on iicbus5 sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)! lkpi_iic6: <LinuxKPI I2C> on drm1 iicbus6: <Philips I2C bus> on lkpi_iic6 iic6: <I2C generic I/O> on iicbus6 lkpi_iic7: <LinuxKPI I2C> on drm4 iicbus7: <Philips I2C bus> on lkpi_iic7 iic7: <I2C generic I/O> on iicbus7 [drm] Initialized i915 1.6.0 20201103 for drmn0 on minor 0 VT: Replacing driver "efifb" with new "drmfb". start FB_INFO: height=1080 width=1920 depth=32 pbase=0xe0000000 vbase=0xfffff800e0000000 name=drmn0 id=i915drmfb flags=0x0 stride=7680 end FB_INFO wlan0: Ethernet address: [_MAC_XXXXXXXXXX] wlan0: Ethernet address: [_MAC_XXXXXXXXXX] iwn0: iwn_read_firmware: ucode rev=0x12a80601 iwn0: iwn_read_firmware: ucode rev=0x12a80601 wlan0: link state changed to UP wlan0: link state changed to DOWN acpi_video0: <ACPI video extension> on vgapci0 ichwd0: <Intel Panther Point watchdog timer> on isa0 iwn0: iwn_read_firmware: ucode rev=0x12a80601 wlan0: link state changed to UP wlan0: link state changed to DOWN iwn0: iwn_read_firmware: ucode rev=0x12a80601 wlan0: link state changed to UP lo0: link state changed to DOWN wlan0: link state changed to DOWN lo0: link state changed to UP pid 1941 (dbus-daemon), jid 0, uid 556: exited on signal 11 (no core dump - bad address) pid 1967 (avahi-daemon), jid 0, uid 558: exited on signal 11 (no core dump - bad address) pid 3463 (gpg-agent), jid 0, uid 1001: exited on signal 11 (no core dump - bad address) pid 1688 (syslogd), jid 0, uid 0: exited on signal 11 (no core dump - bad address) pid 3142 (upowerd), jid 0, uid 0: exited on signal 11 (no core dump - bad address) Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 0 0 0 0 done All buffers synced. Uptime: 9m0s ---<<BOOT>>--- Copyright (c) 1992-2023 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 14.1-RELEASE-p2 NOMADBSD amd64 FreeBSD clang version 18.1.5 (https://github.com/llvm/llvm-project.git llvmorg-18.1.5-0-g617a15a9eac9) VT(efifb): resolution 1920x1080 module_register: cannot register pci/re from kernel; already loaded from if_re.ko Module pci/re failed to register: 17 module_register: cannot register re/miibus from kernel; already loaded from if_re.ko Module re/miibus failed to register: 17 CPU: Intel(R) Core(TM) i7-3537U CPU @ 2.00GHz (2494.48-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7dbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8135909376 (7759 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <LGE LGPC > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 Launching APs: 1 3 2 random: entropy device external interface kbd1 at kbdmux0 efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s smbios0: <System Management BIOS> at iomem 0xdac46000-0xdac4601e smbios0: Version: 2.7, BCD Revision: 2.7 aesni0: No AES or SHA support. acpi0: <LGE LGPC> acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x4000-0x403f mem 0xf0000000-0xf03fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf1600000-0xf160ffff at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 hdac0: <Intel Panther Point HDA Controller> mem 0xf1610000-0xf1613fff at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 iwn0: <Intel Centrino Advanced 6235> mem 0xf0d00000-0xf0d01fff at device 0.0 on pci1 pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0 pci2: <ACPI PCI bus> on pcib2 re0: <RealTek 810xE PCIe 10/100baseTX> port 0x2000-0x20ff mem 0xf0c04000-0xf0c04fff,0xf0c00000-0xf0c03fff at device 0.0 on pci2 re0: Using 1 MSI-X message re0: ASPM disabled re0: Chip rev. 0x40800000 re0: MAC rev. 0x00200000 miibus0: <MII bus> on re0 rlphy0: <RTL8201E 10/100 media interface> PHY 1 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf1619000-0xf16193ff at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Panther Point AHCI SATA controller> port 0x4098-0x409f,0x40bc-0x40bf,0x4090-0x4097,0x40b8-0x40bb,0x4060-0x407f mem 0xf1618000-0xf16187ff at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0. psm0: model Elantech Touchpad, device ID 0 battery0: <ACPI Control Method Battery> on acpi0 acpi_button1: <Sleep Button> on acpi0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff pnpid ORM0000 on isa0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 sysctl_warn_reuse: can't re-use a leaf (hw.acpi.cpu.cppc_notify)! Timecounter "TSC-low" frequency 1247166813 Hz quality 1000 Timecounters tick every 1.000 msec ugen1.1: <Intel EHCI root HUB> at usbus1 ugen0.1: <Intel XHCI root HUB> at usbus0 uhub0 on usbus1 uhub1 on usbus0 uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC269 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC269 (Internal Analog)> at nid 20 and 24 on hdaa0 pcm1: <Realtek ALC269 (Left Analog Headphones)> at nid 33 on hdaa0 hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0 hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1 pcm2: <Intel Panther Point (HDMI/DP 8ch)> at nid 6 on hdaa1 Trying to mount root from zfs:nomadbsd_zroot/ROOT/default []... ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <SK hynix SC210 mSATA 256GB 20001L00> ATA8-ACS SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 244198MB (500118192 512 byte sectors) ses0 at ahciem0 bus 0 scbus3 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 uhub1: 8 ports with 8 removable, self powered Root mount waiting for: usbus0 usbus1 uhub0: 3 ports with 3 removable, self powered usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device SanDisk Cruzer Blade (0x0781:0x5567) usb_msc_auto_quirk: UQ_MSC_NO_PREVENT_ALLOW set for USB mass storage device SanDisk Cruzer Blade (0x0781:0x5567) ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 uhub2 on uhub0 uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 ugen0.2: <SanDisk Cruzer Blade> at usbus0 umass0 on uhub1 umass0: <SanDisk Cruzer Blade, class 0/0, rev 2.00/1.27, addr 1> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x8100 umass0:4:0: Attached to scbus4 da0 at umass-sim0 bus 0 scbus4 target 0 lun 0 da0: <SanDisk Cruzer Blade 1.27> Removable Direct Access SPC-4 SCSI device da0: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX] da0: 40.000MB/s transfers da0: 14971MB (30660608 512 byte sectors) da0: quirks=0x2<NO_6_BYTE> Root mount waiting for: usbus0 usbus1 ugen0.3: <vendor 0x8087 product 0x07da> at usbus0 uhub2: 8 ports with 8 removable, self powered Root mount waiting for: usbus0 usbus1 ugen0.4: <Realtek USB3.0 Card Reader> at usbus0 umass1 on uhub1 umass1: <Realtek USB3.0 Card Reader, class 0/0, rev 3.00/1.28, addr 3> on usbus0 umass1: SCSI over Bulk-Only; quirks = 0x4000 umass1:5:1: Attached to scbus5 da1 at umass-sim1 bus 1 scbus5 target 0 lun 0 da1: <Generic- USB3.0 CRW -SD 1.00> Removable Direct Access SPC-2 SCSI device da1: 400.000MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present da1: quirks=0x2<NO_6_BYTE> da2 at umass-sim1 bus 1 scbus5 target 0 lun 1 da2: <Generic- USB3.0 CRW -SD 1.00> Removable Direct Access SPC-2 SCSI device da2: 400.000MB/s transfers da2: Attempt to query device size failed: NOT READY, Medium not present da2: quirks=0x2<NO_6_BYTE> ugen1.3: <LG HD WebCam LG HD WebCam> at usbus1 Cuse v0.1.37 @ /dev/cuse ichsmb0: <Intel Panther Point SMBus controller> port 0xefa0-0xefbf mem 0xf1614000-0xf16140ff at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: Embedded MOF found ACPI: \134_SB.PCI0.LPCB.EC.MAP1.WQAC: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361) re0: link state changed to DOWN lo0: link state changed to UP ubt0 on uhub1 ubt0: <vendor 0x8087 product 0x07da, class 224/1, rev 2.00/78.69, addr 2> on usbus0 wlan0: Ethernet address: [_MAC_XXXXXXXXXX]