Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2025-12-02 20:53:51
From: tingo
Description: FreeBSD/arm64 on Raspberry Pi Foundation Raspberry Pi 5 Model B
---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.3-RELEASE-p5 GENERIC arm64
FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2)
VT(efifb): resolution 1920x1080
module scmi already present!
real memory = 17159667712 (16364 MB)
avail memory = 16699432960 (15925 MB)
Starting CPU 1 (100)
Starting CPU 2 (200)
Starting CPU 3 (300)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
random: entropy device external interface
kbd0 at kbdmux0
acpi0: <RPIFDN RPI5>
acpi0: Power Button (fixed)
acpi0: Could not update all GPEs: AE_NOT_CONFIGURED
psci0: <ARM Power State Co-ordination Interface Driver> on acpi0
gic0: <ARM Generic Interrupt Controller> iomem 0x107fff9000-0x107fff9fff,0x107fffa000-0x107fffafff on acpi0
gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 320
generic_timer0: <ARM Generic Timer> irq 5,6,7,8 on acpi0
Timecounter "ARM MPCore Timecounter" frequency 54000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 54000000 Hz quality 1000
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
pmu0: <Performance Monitoring Unit> on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_syscontainer0: <System Container> on acpi0
pcib0: <ARM PCI Firmware config space host controller> on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 0.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
pcib3: <PCI-PCI bridge> at device 3.0 on pci2
pci3: <PCI bus> on pcib3
nvme0: <Generic NVMe Device> mem 0xc0100000-0xc0103fff at device 0.0 on pci3
nvme0: unable to allocate MSI-X
nvme0: unable to allocate MSI
pcib4: <PCI-PCI bridge> at device 7.0 on pci2
pci4: <PCI bus> on pcib4
nvme1: <Generic NVMe Device> mem 0xc0000000-0xc0003fff at device 0.0 on pci4
nvme1: unable to allocate MSI-X
nvme1: unable to allocate MSI
acpi_syscontainer1: <System Container> on acpi0
sdhci_acpi0: <Intel Bay Trail/Braswell SDXC Controller> iomem 0x1000fff000-0x1000fff25f irq 3 on acpi0
mmc0: <MMC/SD bus> on sdhci_acpi0
sdhci_acpi1: <Intel Bay Trail/Braswell SDXC Controller> iomem 0x1001100000-0x100110025f irq 4 on acpi0
mmc1: <MMC/SD bus> on sdhci_acpi1
uart0: <PrimeCell UART (PL011)> iomem 0x107d001000-0x107d0011ff irq 0 on acpi0
xhci0: <Generic USB 3.0 controller> iomem 0x1f00200000-0x1f002fffff irq 1 on acpi0
xhci0: 64 bytes context size, 64-bit DMA
usbus0 on xhci0
xhci1: <Generic USB 3.0 controller> iomem 0x1f00300000-0x1f003fffff irq 2 on acpi0
xhci1: 64 bytes context size, 64-bit DMA
usbus1 on xhci1
armv8crypto0: <AES-CBC,AES-XTS,AES-GCM>
Timecounters tick every 1.000 msec
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 5.0Gbps Super Speed USB v3.0
nvme0: Allocated 64MB host memory buffer
ugen1.1: <Generic XHCI root HUB> at usbus1
uhub0 on usbus1
uhub0: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen0.1: <Generic XHCI root HUB> at usbus0
uhub1 on usbus0
uhub1: <Generic XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
nvme1: Allocated 64MB host memory buffer
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
mmcsd0: 63GB <SDHC SD64G 6.1 SN 589002AF MFG 09/2022 by 159 TI> at mmc0 50.0MHz/4bit/65535-block
mmc1: No compatible cards found on bus
CPU 0: ARM Cortex-A76 r4p1 affinity: 0 0
Cache Type = <64 byte D-cacheline,64 byte I-cacheline,PIPT ICache,64 byte ERG,64 byte CWG,IDC>
Instruction Set Attributes 0 = <DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL>
Instruction Set Attributes 1 = <RCPC-8.3,DCPoP>
Instruction Set Attributes 2 = <>
Processor Features 0 = <CSV3,CSV2,RAS,AdvSIMD+HP,FP+HP,EL3,EL2,EL1,EL0 32>
Processor Features 1 = <PSTATE.SSBS>
Processor Features 2 = <>
Memory Model Features 0 = <TGran4,TGran64,TGran16,SNSMem,BigEnd,16bit ASID,1TB PA>
Memory Model Features 1 = <XNX,PAN+ATS1E1,LO,HPD+TTPBHA,VH,16bit VMID,HAF+DS>
Memory Model Features 2 = <32bit CCIDX,48bit VA,IESB,UAO,CnP>
Memory Model Features 3 = <>
Memory Model Features 4 = <>
Debug Features 0 = <DoubleLock,2 CTX BKPTs,4 Watchpoints,6 Breakpoints,PMUv3p1,Debugv8p2>
Debug Features 1 = <>
Auxiliary Features 0 = <>
Auxiliary Features 1 = <>
AArch32 Instruction Set Attributes 5 = <RDM,CRC32,SHA2,SHA1,AES+VMULL,SEVL>
AArch32 Media and VFP Features 0 = <FPRound,FPSqrt,FPDivide,DP VFPv3+v4,SP VFPv3+v4,AdvSIMD>
AArch32 Media and VFP Features 1 = <SIMDFMAC,FPHP Arith,SIMDHP Arith,SIMDSP,SIMDInt,SIMDLS,FPDNaN,FPFtZ>
CPU 1: ARM Cortex-A76 r4p1 affinity: 1 0
CPU 2: ARM Cortex-A76 r4p1 affinity: 2 0
CPU 3: ARM Cortex-A76 r4p1 affinity: 3 0
gic0: using for IPIs
Release APs...Trying to mount root from zfs:zroot/ROOT/default []...
nda0 at nvme0 bus 0 scbus0 target 0 lun 1
nda0: <Samsung SSD 990 EVO Plus 4TB 2B2QKXG7 S7U9NU0YA21568Y>
nda0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
nda0: nvme version 2.0
nda0: 3815447MB (7814037168 512 byte sectors)
nda1 at nvme1 bus 0 scbus1 target 0 lun 1
nda1: <Samsung SSD 990 EVO Plus 4TB 2B2QKXG7 S7U9NU0YA21527F>
nda1: [_SERIAL_NUMBER_XXXXXXXXXXXX]
nda1: nvme version 2.0
nda1: 3815447MB (7814037168 512 byte sectors)
done
TCP_ratelimit: Is now initialized
ugen1.2: <Glorious Model O- Wireless> at usbus1
ugen0.2: <vendor 0x0461 HP USB Keyboard> at usbus0
ukbd1 on uhub1
ukbd1: <vendor 0x0461 HP USB Keyboard, class 0/0, rev 1.10/1.21, addr 1> on usbus0
ukbd0 on uhub0
ukbd0: <Glorious Model O- Wireless, class 0/0, rev 2.00/1.00, addr 1> on usbus1
kbd1 at ukbd0
ukbd2 on uhub0
ukbd2: <Glorious Model O- Wireless, class 0/0, rev 2.00/1.00, addr 1> on usbus1
kbd2 at ukbd1
kbd3 at ukbd2
ugen0.3: <Lenovo Thinkpad USB LAN> at usbus0
ure0 on uhub1
ure0: <Lenovo Thinkpad USB LAN, class 0/0, rev 3.00/30.00, addr 2> on usbus0
miibus0: <MII bus> on ure0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 0 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
ue0: <USB Ethernet> on ure0
ue0: Ethernet address: [_MAC_XXXXXXXXXX]
ue0: link state changed to DOWN
lo0: link state changed to UP
ue0: link state changed to UP
ums0 on uhub0
ums0: <Glorious Model O- Wireless, class 0/0, rev 2.00/1.00, addr 1> on usbus1
ums0: 5 buttons and [XYZT] coordinates ID=0
uhid0 on uhub1
uhid0: <vendor 0x0461 HP USB Keyboard, class 0/0, rev 1.10/1.21, addr 1> on usbus0