Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.

Date: 2025-12-03 15:07:37
From: DarvCL
Description: Zynq (Z7-Nano)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
    2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
    2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
    2024
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 10.1 (GENERIC) #0: Mon Dec 16 13:08:11 UTC 2024
	[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/evbarm/compile/GENERIC
total memory = 512 MB
avail memory = 486 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
armfdt0 (root)
simplebus0 at armfdt0
simplebus1 at simplebus0
cpus0 at simplebus0
simplebus2 at simplebus0
cpu0 at cpus0: Cortex-A9 r3p0 (Cortex V7A core)
cpu0: DC enabled IC enabled WB enabled LABT branch prediction enabled
cpu0: L1 32KB/32B 4-way (256 set) VIPT Instruction cache
cpu0: L1 32KB/32B 4-way (256 set) write-back-locking-C PIPT Data cache
cpu0: L2 512KB/32B 8-way (2048 set) write-back-locking-D PIPT Unified cache
vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
cpufreqdt0 at cpu0
cpu1 at cpus0: Cortex-A9 r3p0 (Cortex V7A core)
cpu1: DC enabled IC enabled WB enabled LABT branch prediction enabled
cpu1: L1 32KB/32B 4-way (256 set) VIPT Instruction cache
cpu1: L1 32KB/32B 4-way (256 set) write-back-locking-C PIPT Data cache
cpu1: L2 512KB/32B 8-way (2048 set) write-back-locking-D PIPT Unified cache
vfp1 at cpu1: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
syscon0 at simplebus1: System Controller Registers
gic0 at simplebus1: GIC
armgic0 at gic0: Generic Interrupt Controller, 96 sources (85 valid)
armgic0: 32 Priorities, 64 SPIs, 5 PPIs, 16 SGIs
zynqclk0 at syscon0: Zynq-7000 PS clock subsystem (PS_CLK 33333333 Hz)
zynqgpio0 at simplebus1: XGPIOPS
gpio0 at zynqgpio0: 128 pins
l2cc0 at simplebus1
arml2cc0 at l2cc0: ARM PL310 r3p2 L2 Cache Controller (disabled)
arml2cc0: cache enabled
a9tmr0 at simplebus1
arma9tmr0 at a9tmr0: A9 Global 64-bit Timer (333 MHz)
a9ptmr0 at simplebus1
a9ptmr0: interrupting on GIC irq 29
arma9ptmr0 at a9ptmr0: A9 Private Timer (333 MHz)
zynquart0 at simplebus1
zynquart0: console
zynquart0: interrupting on GIC irq 59
fregulator0 at simplebus0: VCCPINT
/axi/devcfg@f8007000 at simplebus1 not configured
/axi/tpiu@f8803000 at simplebus1 not configured
/axi/etb@f8801000 at simplebus1 not configured
/axi/funnel@f8804000 at simplebus1 not configured
/replicator at simplebus0 not configured
/axi/ptm@f889c000 at simplebus1 not configured
/axi/ptm@f889d000 at simplebus1 not configured
/fpga-full at simplebus0 not configured
zynqxadc0 at simplebus1: ADC
/axi/memory-controller@f8006000 at simplebus1 not configured
/axi/sram@fffc0000 at simplebus1 not configured
cemac0 at simplebus1: Cadence Gigabit Ethernet Controller
ifmedia_set: no match for 0x20/0xfffffff
cemac0: interrupting on GIC irq 54
sdhc0 at simplebus1: Arasan SDHCI controller
sdhc0: interrupting on GIC irq 56
sdhc0: SDHC 2.0, rev 137, caps <69ec0080/00000000>, 32-bit ADMA2, 99999 kHz, embedded slot, HS 3.3V, 512 byte blocks
sdmmc0 at sdhc0 slot 0
/axi/slcr@f8000000/rstc@200 at syscon0 not configured
/axi/slcr@f8000000/pinctrl@700 at syscon0 not configured
/axi/dmac@f8003000 at simplebus1 not configured
/axi/efuse@f800d000 at simplebus1 not configured
/axi/timer@f8001000 at simplebus1 not configured
/axi/timer@f8002000 at simplebus1 not configured
ehci0 at simplebus1
ehci0: Zynq USB Controller id=5 revision=2 version=2
ehci0: HCI revision=0x100
ehci0: 1 host port, device capable, 12 endpoints
ehci0: ULPI phy VID 0x0424 PID 0x0007
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
ehci0: interrupting on GIC irq 53
/axi/watchdog@f8005000 at simplebus1 not configured
armpmu0 at simplebus0: Performance Monitor Unit
WARNING: system needs entropy for security; see entropy(7)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
cpufreqdt0: rate: 666.666 MHz, 1000000 uV
armpmu0: interrupting on GIC irq 37
armpmu0: interrupting on GIC irq 38
IPsec: Initialized Security Association Processing.
uhub0 at usb0: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
sdmmc0: SD card status: 4-bit, C10, U1, A1
ld0 at sdmmc0: <0x03:0x5344:SC16G:0x80:0x8bdd3d5a:0x192>
ld0: 15193 MB, 7717 cyl, 64 head, 63 sec, 512 bytes/sect x 31116288 sectors
ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz
urtwn0 at uhub0 port 1
urtwn0: Realtek (0x0bda) 802.11n NIC (0x8179), rev 2.00/0.00, addr 2
urtwn0: MAC/BB RTL8188EU, RF 6052 1T1R, address [_MAC_XXXXXXXXXX]
urtwn0: 1 rx pipe, 2 tx pipes
swwdog0: software watchdog initialized
boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs
kern.module.path=/stand/evbarm/10.1/modules
WARNING: no TOD clock present
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
entropy: best effort