Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2026-01-04 20:21:21
From: sadness
Description: NetBSD/hppa 10.1 on HP 9000 745i/50
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.0000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.0000000] 2024, 2025 [ 1.0000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.0000000] The Regents of the University of California. All rights reserved. [ 1.0000000] NetBSD 10.1_STABLE (GENERIC) #0: Sat Jan 3 21:38:23 CET 2026 [ 1.0000000] [_EMAIL_XXXXXXXXXXXXXXXXXXX]:/root/obj/sys/arch/hppa/compile/GENERIC [ 1.0000000] HP9000/745i/747i/50 (Pace) [ 1.0000000] real mem = 49152 KB (73728 reserved for PROM, 35832 KB used by NetBSD) [ 1.0000000] avail mem = 34956 KB [ 1.0000000] mainbus0 (root) [flex fff80000] [ 1.0000000] pdc0 at mainbus0 [ 1.0000000] power0 at mainbus0: not available [ 1.0000000] cpu0 at mainbus0 hpa 0xfffbe000 path 8 irq 31: PA7100 (T-Bird) rev 0 [ 1.0000000] cpu0: PCXT, PA-RISC 1.1b, lev 1, cat A, 50 MHz clk [ 1.0000000] cpu0: shadows, 64K/64K D/I caches, 120 shared TLB, 16 shared BTLB [ 1.0000000] cpu0: PCXT (Rolex - CMOS-26B) floating point, rev 1 [ 1.0000000] mem0 at mainbus0 hpa 0xfffbf000 path 9: viper rev 0, ctrl 0xfff90001<eisa_den,lpmc_en> size 48MB [ 1.0000000] sti0 at mainbus0 hpa 0xf4000000 path 0: rev 8.02;10, ID 0x27F1239240A00499 [ 1.0000000] sti0: HPA1991AC19, 2048x1024 frame buffer, 1280x1024x8 display [ 1.0000000] sti0: 10x20 font type 1, 40 bpc, charset 0-255 [ 1.0000000] asp0 at mainbus0 hpa 0xf0000000 path 2 irq 28: #7 rev 129, lan 1 scsi 7 [ 1.0000000] gsc0 at asp0: leds [ 1.0000000] oosiop0 at gsc0 hpa 0xf0825000 path 2/0/1 irq 9: NCR53C700 rev 0, 50MHz, SCSI ID 7 [ 1.0000000] scsibus0 at oosiop0: 8 targets, 8 luns per target [ 1.0000000] iee0 at gsc0 hpa 0xf0826000 path 2/0/2 irq 8: Intel 82596DX/SX address [_MAC_XXXXXXXXXX] [ 1.0000000] hil0 at gsc0 hpa 0xf0821000 path 2/0/3 irq 1 [ 1.0000000] com2 at gsc0 hpa 0xf0823000 path 2/0/4 irq 5: ns16550a, 16-byte FIFO [ 1.0000000] com2: console [ 1.0000000] com3 at gsc0 hpa 0xf0822000 path 2/0/5 irq 6: ns16550a, 16-byte FIFO [ 1.0000000] lpt1 at gsc0 hpa 0xf0824000 path 2/0/6 irq 7 [ 1.0000000] "Core HPIB" at gsc0 (type 0xa, sv 0x80) hpa 0xf0835000 path 2/0/7 not configured [ 1.0000000] harmony0 at gsc0 hpa 0xf1000000 path 2/0/8 irq 13: unknown id == 0x13 [ 1.0000000] WARNING: system needs entropy for security; see entropy(7) [ 1.0000030] scsibus0: waiting 2 seconds for devices to settle... [ 1.0803924] wsdisplay0 at sti0 kbdmux 1 [ 2.1401800] hilkbd0 at hil0 code 1: 109-key keyboard, layout 1f [ 2.2113680] wskbd0 at hilkbd0 mux 1 [ 2.2572894] hilms0 at hil0 code 2: Mouse, 2 axes, 2 buttons [ 2.3301959] wsmouse0 at hilms0 mux 0 [ 3.2506040] sd0 at scsibus0 target 0 lun 0: <TEAC, FC-1 HF 07, RV B> disk removable [ 3.3922415] sd0(oosiop0:0:0:0): Check Condition on CDB: 0x00 00 00 00 00 00 [ 3.4790897] SENSE KEY: Not Ready [ 3.5213207] ASC/ASCQ: Logical Unit Not Ready, Cause Not Reportable [ 3.6026267] sd0: drive offline [ 3.6395840] sd0: async, 8-bit transfers [ 4.9327523] st0 at scsibus0 target 3 lun 0: <HP, HP35470A, 9 09> tape removable [ 5.0203959] st0: drive empty [ 5.0849321] st0: sync (200.00ns offset 8), 8-bit (5.000MB/s) transfers [ 5.1647106] st0(oosiop0:0:3:0): Check Condition on CDB: 0x00 00 00 00 00 00 [ 5.2578078] SENSE KEY: Hardware Error [ 5.3053243] ASC/ASCQ: Diagnostic Failure on Component 0x02 [ 6.5920629] sd1 at scsibus0 target 6 lun 0: <MICROP, 2112, 4024> disk fixed [ 6.6869706] sd1: 1001 MB, 1760 cyl, 15 head, 77 sec, 512 bytes/sect x 2051460 sectors [ 6.7808203] sd1: sync (160.00ns offset 8), 8-bit (6.250MB/s) transfers [ 6.8773073] swwdog0: software watchdog initialized [ 7.4876478] oosiop0: phase mismatch addr=011590e0 [ 7.5498244] sd0(oosiop0:0:0:0): Check Condition on CDB: 0x23 00 00 00 00 00 00 00 0c 00 [ 7.6482991] SENSE KEY: Illegal Request [ 7.6968760] ASC/ASCQ: Invalid Command Operation Code [ 7.8536383] WARNING: 1 error while detecting hardware; check system log. [ 7.9424972] boot device: sd1 [ 8.0074044] root on sd1a dumps on sd1b [ 8.1756851] root file system type: ffs [ 8.2342030] kern.module.path=/stand/hppa/10.1/modules