Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2026-02-18 14:57:05
From: tsutsui
Description: NetBSD/evbarm-aarch64eb 11.0_RC1 on Raspberry Pi 3B
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
2024, 2025, 2026
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 11.0_RC1 (GENERIC64) #0: Fri Feb 6 08:24:25 UTC 2026
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/evbarm/compile/GENERIC64
total memory = 930 MB
avail memory = 895 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
armfdt0 (root)
simplebus0 at armfdt0: Raspberry Pi 3 Model B Rev 1.2
simplebus1 at simplebus0
simplebus2 at simplebus0
cpus0 at simplebus0
simplebus3 at simplebus0
cpu0 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x0
cpu0: package 0, core 0, smt 0, numa 0
cpu0: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
cpu0: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
cpu0: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1
cpu0: L1 32KB/64B 2-way (256 set) VIPT Instruction cache
cpu0: L1 32KB/64B 4-way (128 set) PIPT Data cache
cpu0: L2 512KB/64B 16-way (512 set) PIPT Unified cache
cpu0: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID
cpu0: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
cpu1 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x1
cpu1: package 0, core 1, smt 0, numa 0
cpu1: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
cpu1: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
cpu1: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1
cpu1: L1 32KB/64B 2-way (256 set) VIPT Instruction cache
cpu1: L1 32KB/64B 4-way (128 set) PIPT Data cache
cpu1: L2 512KB/64B 16-way (512 set) PIPT Unified cache
cpu1: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID
cpu1: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
cpu2 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x2
cpu2: package 0, core 2, smt 0, numa 0
cpu2: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
cpu2: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
cpu2: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1
cpu2: L1 32KB/64B 2-way (256 set) VIPT Instruction cache
cpu2: L1 32KB/64B 4-way (128 set) PIPT Data cache
cpu2: L2 512KB/64B 16-way (512 set) PIPT Unified cache
cpu2: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID
cpu2: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
cpu3 at cpus0: Arm Cortex-A53 r0p4 (v8-A), id 0x3
cpu3: package 0, core 3, smt 0, numa 0
cpu3: IC enabled, DC enabled, EL0/EL1 stack Alignment check enabled
cpu3: Cache Writeback Granule 16B, Exclusives Reservation Granule 16B
cpu3: Dcache line 64, Icache line 64, DIC=0, IDC=0, LoUU=1, LoC=2, LoUIS=1
cpu3: L1 32KB/64B 2-way (256 set) VIPT Instruction cache
cpu3: L1 32KB/64B 4-way (128 set) PIPT Data cache
cpu3: L2 512KB/64B 16-way (512 set) PIPT Unified cache
cpu3: revID=0x80, PMCv3, 4k table, 64k table, 16bit ASID
cpu3: auxID=0x10000, FP, CRC32, NEON, rounding, NaN propagation, denormals, 32x64bitRegs, Fused Multiply-Add
bcmicu0 at simplebus1
fclock0 at simplebus2: 19200000 Hz fixed clock (osc)
bcmcprman0 at simplebus1: BCM283x Clock Controller
syscon0 at simplebus1autoconfiguration error: : couldn't get registers
bcmaux0 at simplebus1
fclock1 at simplebus2: 480000000 Hz fixed clock (otg)
bcmicu1 at simplebus1: Multiprocessor
gtmr0 at simplebus0: Generic Timer
gtmr0: interrupting on local_intc irq 3
armgtmr0 at gtmr0: Generic Timer (19200 kHz, virtual)
timecounter: Timecounter "armgtmr0" frequency 19200000 Hz quality 500
bcmgpio0 at simplebus1: GPIO controller 2835
bcmgpio0: pins 0..31 interrupting on icu irq 49
bcmgpio0: pins 32..54 interrupting on icu irq 50
gpio0 at bcmgpio0: 54 pins
plcom0 at simplebus1: ARM PL011 UART
plcom0: txfifo 16 bytes
plcom0: interrupting on icu irq 57
com0 at simplebus1: BCM AUX UART, 1-byte FIFO
com0: console
com0: interrupting on icu irq 29, clock 800000000 Hz
mmcpwrseq0 at simplebus0autoconfiguration error: : couldn't get reset GPIOs
/soc/thermal@7e212000 at simplebus1 not configured
bcmdmac0 at simplebus1: DMA0 DMA2 DMA4 DMA5 DMA6 DMA7 DMA8 DMA9 DMA10 DMA11
/soc/power at simplebus1 not configured
/phy at simplebus0 not configured
bsciic0 at simplebus1: Broadcom Serial Controller
bsciic0: interrupting on icu irq 53
iic0 at bsciic0: I2C bus
bcmmbox0 at simplebus1: VC mailbox
bcmmbox0: interrupting on icu irq 65
vcmbox0 at bcmmbox0
/soc/timer@7e003000 at simplebus1 not configured
/soc/txp@7e004000 at simplebus1 not configured
bcmsdhost0 at simplebus1: SD HOST controller
bcmsdhost0: interrupting on icu irq 56
bsciic1 at simplebus1: Broadcom Serial Controller
bsciic1: interrupting on icu irq 53
iic1 at bsciic1: I2C bus
/soc/pwm@7e20c000 at simplebus1 not configured
sdhc0 at simplebus1: SDHC controller
sdhc0: interrupting on icu irq 62
bsciic2 at simplebus1: Broadcom Serial Controller
bsciic2: interrupting on icu irq 53
iic2 at bsciic2: I2C bus
dwctwo0 at simplebus1: USB controller
dwctwo0: interrupting on icu irq 9
bcmpmwdog0 at simplebus1: Power management, Reset and Watchdog controller
/soc/vec@7e806000 at simplebus1 not configured
/soc/hdmi@7e902000 at simplebus1 not configured
/soc/gpu at simplebus1 not configured
genfb0 at simplebus1: switching to framebuffer console
genfb0: framebuffer at 0xfe6fa000, size 1280x1024, depth 32, stride 5120
wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-3 added (default, vt100 emulation)
vchiq0 at simplebus1: BCM2835 VCHIQ
armpmu0 at simplebus0: Performance Monitor Unit
gpioleds0 at simplebus0:
bcmrng0 at simplebus1: RNG
entropy: ready
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
sdmmc0 at bcmsdhost0
sdhc0: SDHC 3.0, rev 153, caps <01610000/00000000>, platform DMA, 200000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks
sdmmc1 at sdhc0 slot 0
dwctwo0: Core Release: 2.80a (snpsid=4f54280a)
usb0 at dwctwo0: USB revision 2.0
armpmu0: interrupting on local_intc irq 9
uhub0 at usb0: NetBSD (0x0000) DWC2 root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
IPsec: Initialized Security Association Processing.
sdmmc0: direct I/O error 5, r=6 p=0xffffc000b172ae5c write
sdmmc0: SD card status: 4-bit, C10, U1, V10, A1
ld0 at sdmmc0: <0x02:0x544d:SA32G:0x83:0x2ba2b2a9:0x19b>
ld0: 29818 MB, 7572 cyl, 128 head, 63 sec, 512 bytes/sect x 61067264 sectors (0 bytes/physsect)
ld0: GPT GUID: 3efb4280-0335-11f1-8000-000000000000
dk0 at ld0: "EFI", 163840 blocks at 32768, type: msdos
dk1 at ld0: "netbsd-root", 60866560 blocks at 196608, type: ffs
ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz
sdmmc1: 4-bit width, 50.000 MHz
bwfm0 at sdmmc1 function 1
(manufacturer 0x2d0, product 0xa9a6) at sdmmc1 function 2 not configured
uhub1 at uhub0 port 1: vendor 0424 (0x0424) product 9514 (0x9514), class 9/0, rev 2.00/2.00, addr 2
uhub1: multiple transaction translators
uhub1: 5 ports with 4 removable, self powered
usmsc0 at uhub1 port 1
usmsc0: vendor 0424 (0x0424) product ec00 (0xec00), rev 2.00/2.00, addr 3
smscphy0 at usmsc0 phy 1: SMSC LAN8700 10/100 Ethernet Transceiver, rev. 3
smscphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
usmsc0: Ethernet address [_MAC_XXXXXXXXXX]
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: SEM (0x1a2c) USB Keyboard (0x4324), rev 1.10/1.10, addr 4, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub1 port 2 configuration 1 interface 1
uhidev1: SEM (0x1a2c) USB Keyboard (0x4324), rev 1.10/1.10, addr 4, iclass 3/0
uhidev1: 2 report ids
uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
umass0 at uhub1 port 4 configuration 1 interface 0
umass0: CFD (0x152d) RTKPD-U3A_GR (0x0578), rev 2.10/31.03, addr 5
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <CFD, RTKPD-U3A_GR, 3103> disk fixed
sd0: waiting for pack to spin up...
uhidev2 at uhub1 port 5 configuration 1 interface 0
uhidev2: Logitech (0x046d) USB Receiver (0xc534), rev 2.00/29.01, addr 6, iclass 3/1
ukbd1 at uhidev2
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay0
uhidev3 at uhub1 port 5 configuration 1 interface 1
uhidev3: Logitech (0x046d) USB Receiver (0xc534), rev 2.00/29.01, addr 6, iclass 3/1
uhidev3: 17 report ids
ums0 at uhidev3 reportid 2: 16 buttons, W and Z dirs
wsmouse0 at ums0 mux 0
uhid2 at uhidev3 reportid 3: input=4, output=0, feature=0
uhid3 at uhidev3 reportid 4: input=1, output=0, feature=0
uhid4 at uhidev3 reportid 16: input=6, output=6, feature=0
uhid5 at uhidev3 reportid 17: input=19, output=19, feature=0
uhub0: autoconfiguration error: illegal enable change, port 1
sd0: fabricating a geometry
sd0: 465 GB, 476940 cyl, 64 head, 32 sec, 512 bytes/sect x 976773168 sectors (4096 bytes/physsect)
sd0: fabricating a geometry
swwdog0: software watchdog initialized
WARNING: 3 errors while detecting hardware; check system log.
boot device: ld0
root on dk1
root file system type: ffs
kern.module.path=/stand/evbarm/11.0/modules
WARNING: no TOD clock present
vchiq0: interrupting on icu irq 66
vchiq: vchiq_init_state: slot_zero = 0xffffc000b1840000, is_master = 0
vchiq: local ver 8 (min 3), remote ver 8.
vcaudio0 at vchiq0: auds
bwfm0: Firmware file default: brcmfmac43430-sdio.bin
bwfm0: Firmware file model-spec: brcmfmac43430-sdio.raspberrypi,3-model-b.bin
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
audio0 at vcaudio0: playback
audio0: slinear_be:16 -> slinear_le:16 2ch 48000Hz, blk 7680 bytes (40ms) for playback
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
bwfm0: Found Firmware file: brcmfmac43430-sdio.bin
bwfm0: NVRAM file default: brcmfmac43430-sdio.txt
bwfm0: NVRAM file model-spec: brcmfmac43430-sdio.raspberrypi,3-model-b.txt
bwfm0: Found NVRAM file: brcmfmac43430-sdio.raspberrypi,3-model-b.txt
bwfm0: CLM file default: brcmfmac43430-sdio.clm_blob
bwfm0: CLM file model-spec: brcmfmac43430-sdio.raspberrypi,3-model-b.clm_blob
bwfm0: CHIPACTIVE
bwfm0: address [_MAC_XXXXXXXXXX]
bwfm0: wl0: Oct 23 2017 03:55:53 version[_IP_XXXXX] (r674442 CY) FWID 01-e58d219f
wsdisplay0: screen 4 added (default, vt100 emulation)