Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2026-02-22 22:19:40
From: vlado
Description: MSI B550-A PRO, AMD Ryzen 5 5600X, and Intel I210 15.0-RELEASE-p1 releng/15.0-n280999-7bceec30b351 GENERIC amd64
---<<BOOT>>--- Copyright (c) 1992-2025 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 15.0-RELEASE-p1 releng/15.0-n280999-7bceec30b351 GENERIC amd64 FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) VT(vga): resolution 640x480 CPU: AMD Ryzen 5 5600X 6-Core Processor (3700.11-MHz K8-class CPU) Origin="AuthenticAMD" Id=0xa20f12 Family=0x19 Model=0x21 Stepping=2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x7ef8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX> Structured Extended Features=0x219c97a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA> Structured Extended Features2=0x40069c<UMIP,PKU,OSPKE,VAES,VPCLMULQDQ,RDPID> Structured Extended Features3=0x10<FSRM> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> AMD Extended Feature Extensions ID EBX=0x111ef657<CLZERO,IRPerf,XSaveErPtr,RDPRU,BE,WBNOINVD,IBPB,INT_WBINVD,IBRS,STIBP,STIBP_ALWAYSON,PREFER_IBRS,SAMEMODE_IBRS,NOLMSLE,SSBD,PSFD> SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768 TSC: P-state invariant, performance statistics real memory = 68717379584 (65534 MB) avail memory = 67042570240 (63936 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I > FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs FreeBSD/SMP: 1 package(s) x 6 core(s) x 2 hardware threads random: registering fast source Intel Secure Key Seed random: fast provider: "Intel Secure Key Seed" random: unblocking device. ioapic0 <Version 2.1> irqs 0-23 ioapic1 <Version 2.1> irqs 24-55 Launching APs: 1 9 8 2 3 5 4 7 6 10 11 random: entropy device external interface kbd1 at kbdmux0 efirtc0: <EFI Realtime Clock> efirtc0: registered as a time-of-day clock, resolution 1.000000s vtvga0: <VT VGA driver> smbios0: <System Management BIOS> at iomem 0xdd9c8000-0xdd9c801e smbios0: Entry point: v2.1 (32-bit), Version: 2.8, BCD Revision: 2.8 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256> acpi0: <ALASKA A M I > acpi0: Power Button (fixed) attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 350 Event timer "HPET1" frequency 14318180 Hz quality 350 Event timer "HPET2" frequency 14318180 Hz quality 350 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached) pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0 pci1: <ACPI PCI bus> on pcib1 xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfc9a0000-0xfc9a7fff at device 0.0 on pci1 xhci0: 32 bytes context size, 64-bit DMA xhci0: xECP capabilities <LEGACY,PROTO,PROTO,PROTO,DEBUG> usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 ahci0: <AMD 500 Series AHCI SATA controller> mem 0xfc980000-0xfc99ffff at device 0.1 on pci1 ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 pcib2: <ACPI PCI-PCI bridge> at device 0.2 on pci1 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 8.0 on pci2 pci3: <ACPI PCI bus> on pcib3 igb0: <Intel(R) I210 (Copper)> mem 0xfc600000-0xfc6fffff,0xfc700000-0xfc703fff at device 0.0 on pci3 igb0: EEPROM V3.25-0 eTrack 0x800006eb igb0: Using 1024 TX descriptors and 1024 RX descriptors igb0: Using 4 RX queues 4 TX queues igb0: Using MSI-X interrupts with 5 vectors igb0: Ethernet address: [_MAC_XXXXXXXXXX] igb0: netmap queues/slots: TX 4/1024, RX 4/1024 pcib4: <ACPI PCI-PCI bridge> at device 9.0 on pci2 pci4: <ACPI PCI bus> on pcib4 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xf000-0xf0ff mem 0xfc804000-0xfc804fff,0xfc800000-0xfc803fff at device 0.0 on pci4 re0: Using 1 MSI-X message re0: Chip rev. 0x54000000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 pcib5: <ACPI PCI-PCI bridge> at device 3.1 on pci0 pci5: <ACPI PCI bus> on pcib5 pcib6: <ACPI PCI-PCI bridge> mem 0xfcf00000-0xfcf03fff at device 0.0 on pci5 pci6: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> at device 0.0 on pci6 pci7: <ACPI PCI bus> on pcib7 vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0x7e00000000-0x7effffffff,0x7f00000000-0x7f0fffffff,0xfcd00000-0xfcdfffff at device 0.0 on pci7 hdac0: <ATI (0xab28) HDA Controller> mem 0xfce20000-0xfce23fff at device 0.1 on pci7 pcib8: <ACPI PCI-PCI bridge> at device 7.1 on pci0 pci8: <ACPI PCI bus> on pcib8 pcib9: <ACPI PCI-PCI bridge> at device 8.1 on pci0 pci9: <ACPI PCI bus> on pcib9 pci9: <encrypt/decrypt> at device 0.1 (no driver attached) xhci1: <AMD Matisse USB 3.0 controller> mem 0xfca00000-0xfcafffff at device 0.3 on pci9 xhci1: 64 bytes context size, 64-bit DMA xhci1: xECP capabilities <LEGACY,PROTO,PROTO,PROTO,PROTO,PROTO,DEBUG> usbus1 on xhci1 usbus1: 5.0Gbps Super Speed USB v3.0 hdac1: <AMD X570 HDA Controller> mem 0xfcc00000-0xfcc07fff at device 0.4 on pci9 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 acpi_button0: <Power Button> on acpi0 acpi_syscontainer0: <System Container> on acpi0 cpu0: <ACPI CPU> on acpi0 uart: ns8250: UART FCR is broken (0x1) uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 16. hwpstate0: <Cool`n'Quiet 2.0> on cpu0 cpufreq0: <CPU frequency control> on cpu0 Timecounter "TSC-low" frequency 1849999441 Hz quality 1000 Timecounters tick every 1.000 msec ugen1.1: <AMD XHCI root HUB> at usbus1 ugen0.1: <AMD XHCI root HUB> at usbus0 uhub0 on usbus1 uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 uhub1 on usbus0 uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0 hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0 pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0 pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0 hdacc1: <Realtek ALC897 HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek ALC897 Audio Function Group> at nid 1 on hdacc1 pcm2: <Realtek ALC897 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1 pcm3: <Realtek ALC897 (Front Analog)> at nid 27 and 25 on hdaa1 Trying to mount root from zfs:zroot/ROOT/default []... ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <GIGABYTE GP-GSTFS31100TNTD SBFMLA.5> ACS-4 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 244198MB (500118192 512 byte sectors) ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <GIGABYTE GP-GSTFS31100TNTD SBFMLA.5> ACS-4 ATA SATA 3.x device ada1: [_SERIAL_NUMBER_XXXXXXXXXXX] ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 244198MB (500118192 512 byte sectors) ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 ada2: <WDC WD4004FRYZ-01CBCB0 01.01H01> ACS-4 ATA SATA 3.x device ada2: [_SERIAL_NUMBER_XXXXX] ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 3815447MB (7814037168 512 byte sectors) ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 ada3: <WDC WD4004FRYZ-01CBCB0 01.01H01> ACS-4 ATA SATA 3.x device ada3: [_SERIAL_NUMBER_XXXXX] ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada3: Command Queueing enabled ada3: 3815447MB (7814037168 512 byte sectors) uhub0: 8 ports with 8 removable, self powered uhub1: 14 ports with 14 removable, self powered ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0 uhub2 on uhub1 uhub2: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/60.70, addr 1> on usbus0 Root mount waiting for: usbus0 uhub2: 4 ports with 4 removable, self powered Root mount waiting for: usbus0 ugen0.3: <MSI MYSTIC LIGHT> at usbus0 usbhid0 on uhub1 usbhid0: <MSI MYSTIC LIGHT, class 0/0, rev 1.10/0.01, addr 2> on usbus0 hidbus0: <HID bus> on usbhid0 ugen0.4: <American Power Conversion Back-UPS CS 350 FW:807.q7.I USB FW:q7> at usbus0 Root mount waiting for: usbus0 intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0 smbus0: <System Management Bus> on intsmb0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: cannot find EC device acpi_wmi0: Embedded MOF found acpi_wmi1: <ACPI-WMI mapping> on acpi0 acpi_wmi1: cannot find EC device acpi_wmi2: <ACPI-WMI mapping> on acpi0 acpi_wmi2: cannot find EC device acpi_wmi2: Embedded MOF found bridge0: Ethernet address: [_MAC_XXXXXXXXXX] bridge0: link state changed to UP igb0: promiscuous mode enabled igb0: link state changed to UP re0: link state changed to UP lo0: link state changed to UP igb0: link state changed to DOWN igb0: link state changed to UP pflog0: promiscuous mode enabled