Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2026-05-08 22:43:34
From: sfk
Description: FreeBSD/amd64 on ASUSTeK COMPUTER INC. GL753VE
---<<BOOT>>--- Copyright (c) 1992-2025 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 15.0-RELEASE-p8 releng/15.0-n281036-53054229dcb3 GENERIC amd64 FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) VT(efifb): resolution 1920x1080 CPU: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz (2800.00-MHz K8-class CPU) Origin="GenuineIntel" Id=0x906e9 Family=0x6 Model=0x9e Stepping=9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x121<LAHF,ABM,Prefetch> Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 34359738368 (32768 MB) avail memory = 33348902912 (31803 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <_ASUS_ Notebook> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads random: registering fast source Intel Secure Key Seed random: fast provider: "Intel Secure Key Seed" random: unblocking device. ioapic0 <Version 2.0> irqs 0-119 Launching APs: 1 3 2 4 5 6 7 random: entropy device external interface kbd1 at kbdmux0 Fatal trap 3: breakpoint instruction fault while in kernel mode cpuid = 0; apic id = 00 instruction pointer = 0x20:0x7b3cee1c stack pointer = 0x28:0xffffffff82af7ca8 frame pointer = 0x28:0x0 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = interrupt enabled, IOPL = 0 current process = 0 (swapper) rdi: ffffffff82af7d9c rsi: ffffffff81b82701 rdx: 0000000000000000 rcx: 00000000e00fd0dc r8: 0000000000000000 r9: 0000000000000000 rax: 0000000000000000 rbx: ffffffff82af7e58 rbp: 0000000000000000 r10: 00000000e00fd000 r11: 00000000000007ea r12: 00000000000fd0dc r13: fffff800013a511a r14: fffff800013ad440 r15: 0000000000001830 trap number = 3 EFI RT fault breakpoint instruction fault smbios0: <System Management BIOS> at iomem 0x7b2eb000-0x7b2eb017 smbios0: Entry point: v3 (64-bit), Version: 3.0 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> acpi0: <_ASUS_ Notebook> Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.SAT0.PRT0], AE_ALREADY_EXISTS (20250807/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20250807/psobject-372) Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.SAT0.PRT1], AE_ALREADY_EXISTS (20250807/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20250807/psobject-372) Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.SAT0.PRT3], AE_ALREADY_EXISTS (20250807/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20250807/psobject-372) Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.SAT0.PRT4], AE_ALREADY_EXISTS (20250807/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20250807/psobject-372) Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.SAT0.PRT5], AE_ALREADY_EXISTS (20250807/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20250807/psobject-372) acpi_ec0: <Embedded Controller: GPE 0x3, ECDT> port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 24000000 Hz quality 950 Event timer "HPET" frequency 24000000 Hz quality 550 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff at device 0.0 on pci1 vgapci1: <VGA-compatible display> port 0xf000-0xf03f mem 0xdd000000-0xddffffff,0xb0000000-0xbfffffff at device 2.0 on pci0 vgapci1: Boot video device xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xdf510000-0xdf51ffff at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: xECP capabilities <PROTO,PROTO,VEND(c0),LEGACY,VEND(c6),VEND(c7),VEND(c2),DEBUG,VEND(c3),VEND(c4),VEND(c5)> usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdf528000-0xdf529fff,0xdf52c000-0xdf52c0ff,0xdf52b000-0xdf52b7ff at device 23.0 on pci0 ahci0: AHCI v1.31 with 3 6Gbps ports, Port Multiplier not supported ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pci2: <network> at device 0.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0 pci3: <ACPI PCI bus> on pcib3 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xdf304000-0xdf304fff,0xdf300000-0xdf303fff at device 0.0 on pci3 re0: Using 1 MSI-X message re0: turning off MSI enable bit. re0: ASPM disabled re0: Chip rev. 0x54000000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 pcib4: <ACPI PCI-PCI bridge> at device 28.6 on pci0 pci4: <ACPI PCI bus> on pcib4 pci4: <unknown> at device 0.0 (no driver attached) pcib5: <ACPI PCI-PCI bridge> at device 29.0 on pci0 pci5: <ACPI PCI bus> on pcib5 nvme0: <Generic NVMe Device> mem 0xdf100000-0xdf103fff at device 0.0 on pci5 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 pci0: <memory> at device 31.2 (no driver attached) hdac0: <Intel Kaby Lake HDA Controller> mem 0xdf520000-0xdf523fff,0xdf500000-0xdf50ffff at device 31.3 on pci0 acpi_button0: <Sleep Button> on acpi0 acpi_button1: <Power Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 16. hwpstate_intel0: <Intel Speed Shift> on cpu0 cpufreq0: <CPU frequency control> on cpu0 hwpstate_intel1: <Intel Speed Shift> on cpu1 cpufreq1: <CPU frequency control> on cpu1 hwpstate_intel2: <Intel Speed Shift> on cpu2 cpufreq2: <CPU frequency control> on cpu2 hwpstate_intel3: <Intel Speed Shift> on cpu3 cpufreq3: <CPU frequency control> on cpu3 hwpstate_intel4: <Intel Speed Shift> on cpu4 cpufreq4: <CPU frequency control> on cpu4 hwpstate_intel5: <Intel Speed Shift> on cpu5 cpufreq5: <CPU frequency control> on cpu5 hwpstate_intel6: <Intel Speed Shift> on cpu6 cpufreq6: <CPU frequency control> on cpu6 hwpstate_intel7: <Intel Speed Shift> on cpu7 cpufreq7: <CPU frequency control> on cpu7 Timecounter "TSC-low" frequency 1403997126 Hz quality 1000 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) ugen0.1: <Intel XHCI root HUB> at usbus0 uhub0 on usbus0 uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 hdacc0: <Realtek ALC235 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC235 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC235 (Internal Analog)> at nid 20 and 18 on hdaa0 pcm1: <Realtek ALC235 (Left Analog Headphones)> at nid 33 on hdaa0 hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 nda0 at nvme0 bus 0 scbus3 target 0 lun 1 nda0: <SAMSUNG MZVLW512HMJP-00000 CXY7501Q S33UNX0J203588> nda0: [_SERIAL_NUMBER_XXXXXXXXXXX] nda0: nvme version 1.2 nda0: 488386MB (1000215216 512 byte sectors) ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ses0: cd0,pass0 in 'Slot 02', SATA Slot: scbus1 target 0 cd0 at ahcich2 bus 0 scbus1 target 0 lun 0 cd0: <Slimtype DVD A DA8AESH XAAM> Removable CD-ROM SCSI device cd0: [_SERIAL_NUMBER_XXXX] 4B6715508655 cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed Trying to mount root from zfs:zroot/ROOT/default []... Root mount waiting for: usbus0 uhub0: 24 ports with 24 removable, self powered ugen0.2: <Logitech USB Optical Mouse> at usbus0 usbhid0 on uhub0 usbhid0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/63.00, addr 1> on usbus0 hidbus0: <HID bus> on usbhid0 Root mount waiting for: usbus0 ugen0.3: <ITE Tech. Inc. ITE Device(8910)> at usbus0 usbhid1 on uhub0 usbhid1: <ITE Tech. Inc. ITE Device(8910), class 0/0, rev 2.00/3.02, addr 2> on usbus0 hidbus1: <HID bus> on usbhid1 hkbd0: <ITE Tech. Inc. ITE Device(8910) Keyboard> on hidbus1 kbd2 at hkbd0 ugen0.4: <vendor 0x8087 product 0x0a2a> at usbus0 ugen0.5: <Azurewave USB2.0 HD UVC WebCam> at usbus0 [drm] Got Intel graphics stolen memory base 0x7c000000, size 0x4000000 drmn1: <drmn> on vgapci1 vgapci1: child drmn1 requested pci_enable_io vgapci1: child drmn1 requested pci_enable_io i915/kbl_dmc_ver1_04.bin: could not load binary firmware /boot/firmware/i915/kbl_dmc_ver1_04.bin either kbl_dmc_ver1_04.bin: could not load binary firmware /boot/firmware/kbl_dmc_ver1_04.bin either i915_kbl_dmc_ver1_04.bin: could not load binary firmware /boot/firmware/i915_kbl_dmc_ver1_04.bin either drmn1: successfully loaded firmware image 'i915/kbl_dmc_ver1_04.bin' drmn1: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) lkpi_iic0: <LinuxKPI I2C> on drmn1 iicbus0: <Philips I2C bus> on lkpi_iic0 iic0: <I2C generic I/O> on iicbus0 lkpi_iic1: <LinuxKPI I2C> on drmn1 iicbus1: <Philips I2C bus> on lkpi_iic1 iic1: <I2C generic I/O> on iicbus1 lkpi_iic2: <LinuxKPI I2C> on drmn1 iicbus2: <Philips I2C bus> on lkpi_iic2 iic2: <I2C generic I/O> on iicbus2 drmn1: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it drmn1: [drm] [ENCODER:110:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it sysctl_add_oid: can't re-use a leaf (hw.dri.debug)! lkpi_iic3: <LinuxKPI I2C> on drm1 iicbus3: <Philips I2C bus> on lkpi_iic3 iic3: <I2C generic I/O> on iicbus3 lkpi_iic4: <LinuxKPI I2C> on drm3 iicbus4: <Philips I2C bus> on lkpi_iic4 iic4: <I2C generic I/O> on iicbus4 [drm] Initialized i915 1.6.0 20201103 for drmn1 on minor 0 VT: Replacing driver "efifb" with new "drmfb". start FB_INFO: height=1080 width=1920 depth=32 pbase=0xb0000000 vbase=0xfffff800b0000000 name=drmn1 id=i915drmfb flags=0x0 stride=7680 end FB_INFO pchtherm0: <Skylake PCH 100 Thermal Subsystem> mem 0xdf52f000-0xdf52ffff at device 20.2 on pci0 ig4iic0: <Intel Sunrise Point-H I2C Controller-0> mem 0xdf52e000-0xdf52efff at device 21.0 on pci0 ig4iic0: Using MSI iicbus5: <Philips I2C bus (ACPI-hinted)> on ig4iic0 iicbus5: <unknown card> at addr 0x15 iic5: <I2C generic I/O> on iicbus5 ichsmb0: <Intel Sunrise Point-H SMBus controller> port 0xf040-0xf05f mem 0xdf52a000-0xdf52a0ff at device 31.4 on pci0 smbus0: <System Management Bus> on ichsmb0 iwm0: <Intel(R) Dual Band Wireless AC 7265> mem 0xdf400000-0xdf401fff at device 0.0 on pci2 iwm7265Dfw: could not load firmware image, error 8 iwm0: hw rev 0x210, fw ver 22.361476.0, address [_MAC_XXXXXXXXXX] rtsx0: <2.1g Realtek RTS5229 PCIe SD Card Reader> mem 0xdf200000-0xdf200fff at device 0.0 on pci4 rtsx0: No card is detected acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: Embedded MOF found acpi_wmi1: <ACPI-WMI mapping> on acpi0 acpi_wmi2: <ACPI-WMI mapping> on acpi0 acpi_wmi3: <ACPI-WMI mapping> on acpi0 hms0: <Logitech USB Optical Mouse> on hidbus0 hms0: 3 buttons and [XYW] coordinates ID=0 hcons0: <ITE Tech. Inc. ITE Device(8910) Consumer Control> on hidbus1 re0: link state changed to UP lo0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP iichid0: <ELAN1200:00 04F3:3045 I2C HID device> at addr 0x15 irq 117 on iicbus5 hidbus2: <HID bus> on iichid0 hms1: <ELAN1200:00 04F3:3045 Mouse> on hidbus2 hms1: 2 buttons and [XYWH] coordinates ID=1 hmt0: <ELAN1200:00 04F3:3045 TouchPad> on hidbus2 hconf0: <ELAN1200:00 04F3:3045 Configuration> on hidbus2 hmt0: Multitouch touchpad with 0 external buttons, click-pad hmt0: 5 contacts with [C] properties. Report range [0:0] - [3200:2198] pflog0: promiscuous mode enabled Security policy loaded: MAC/ntpd (mac_ntpd) pid 5183 (pulseaudio), jid 0, uid 1001: exited on signal 6 (no core dump - other error) pid 5142 (labwc), jid 0, uid 1001: exited on signal 6 (core dumped) pflog0: promiscuous mode disabled Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 0 0 done All buffers synced. Uptime: 7h55m29s ---<<BOOT>>--- Copyright (c) 1992-2025 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 15.0-RELEASE-p8 releng/15.0-n281036-53054229dcb3 GENERIC amd64 FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) VT(efifb): resolution 1920x1080 CPU: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz (2800.00-MHz K8-class CPU) Origin="GenuineIntel" Id=0x906e9 Family=0x6 Model=0x9e Stepping=9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x121<LAHF,ABM,Prefetch> Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 34359738368 (32768 MB) avail memory = 33348902912 (31803 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <_ASUS_ Notebook> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads random: registering fast source Intel Secure Key Seed random: fast provider: "Intel Secure Key Seed" random: unblocking device. ioapic0 <Version 2.0> irqs 0-119 Launching APs: 1 3 2 6 7 4 5 random: entropy device external interface kbd1 at kbdmux0 Fatal trap 3: breakpoint instruction fault while in kernel mode cpuid = 0; apic id = 00 instruction pointer = 0x20:0x7b3cee1c stack pointer = 0x28:0xffffffff82af8ca8 frame pointer = 0x28:0x0 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = interrupt enabled, IOPL = 0 current process = 0 (swapper) rdi: ffffffff82af8d9c rsi: ffffffff81b82701 rdx: 0000000000000000 rcx: 00000000e00fd0dc r8: 0000000000000000 r9: 0000000000000000 rax: 0000000000000000 rbx: ffffffff82af8e58 rbp: 0000000000000000 r10: 00000000e00fd000 r11: 00000000000007ea r12: 00000000000fd0dc r13: fffff800013a511a r14: fffff800013ad440 r15: 0000000000001830 trap number = 3 EFI RT fault breakpoint instruction fault smbios0: <System Management BIOS> at iomem 0x7b2eb000-0x7b2eb017 smbios0: Entry point: v3 (64-bit), Version: 3.0 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> acpi0: <_ASUS_ Notebook> Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.SAT0.PRT0], AE_ALREADY_EXISTS (20250807/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20250807/psobject-372) Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.SAT0.PRT1], AE_ALREADY_EXISTS (20250807/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20250807/psobject-372) Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.SAT0.PRT3], AE_ALREADY_EXISTS (20250807/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20250807/psobject-372) Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.SAT0.PRT4], AE_ALREADY_EXISTS (20250807/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20250807/psobject-372) Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.SAT0.PRT5], AE_ALREADY_EXISTS (20250807/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20250807/psobject-372) acpi_ec0: <Embedded Controller: GPE 0x3, ECDT> port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 24000000 Hz quality 950 Event timer "HPET" frequency 24000000 Hz quality 550 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff at device 0.0 on pci1 vgapci1: <VGA-compatible display> port 0xf000-0xf03f mem 0xdd000000-0xddffffff,0xb0000000-0xbfffffff at device 2.0 on pci0 vgapci1: Boot video device xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xdf510000-0xdf51ffff at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: xECP capabilities <PROTO,PROTO,VEND(c0),LEGACY,VEND(c6),VEND(c7),VEND(c2),DEBUG,VEND(c3),VEND(c4),VEND(c5)> usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdf528000-0xdf529fff,0xdf52c000-0xdf52c0ff,0xdf52b000-0xdf52b7ff at device 23.0 on pci0 ahci0: AHCI v1.31 with 3 6Gbps ports, Port Multiplier not supported ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pci2: <network> at device 0.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0 pci3: <ACPI PCI bus> on pcib3 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xdf304000-0xdf304fff,0xdf300000-0xdf303fff at device 0.0 on pci3 re0: Using 1 MSI-X message re0: ASPM disabled re0: Chip rev. 0x54000000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 pcib4: <ACPI PCI-PCI bridge> at device 28.6 on pci0 pci4: <ACPI PCI bus> on pcib4 pci4: <unknown> at device 0.0 (no driver attached) pcib5: <ACPI PCI-PCI bridge> at device 29.0 on pci0 pci5: <ACPI PCI bus> on pcib5 nvme0: <Generic NVMe Device> mem 0xdf100000-0xdf103fff at device 0.0 on pci5 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 pci0: <memory> at device 31.2 (no driver attached) hdac0: <Intel Kaby Lake HDA Controller> mem 0xdf520000-0xdf523fff,0xdf500000-0xdf50ffff at device 31.3 on pci0 acpi_button0: <Sleep Button> on acpi0 acpi_button1: <Power Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 16. hwpstate_intel0: <Intel Speed Shift> on cpu0 cpufreq0: <CPU frequency control> on cpu0 hwpstate_intel1: <Intel Speed Shift> on cpu1 cpufreq1: <CPU frequency control> on cpu1 hwpstate_intel2: <Intel Speed Shift> on cpu2 cpufreq2: <CPU frequency control> on cpu2 hwpstate_intel3: <Intel Speed Shift> on cpu3 cpufreq3: <CPU frequency control> on cpu3 hwpstate_intel4: <Intel Speed Shift> on cpu4 cpufreq4: <CPU frequency control> on cpu4 hwpstate_intel5: <Intel Speed Shift> on cpu5 cpufreq5: <CPU frequency control> on cpu5 hwpstate_intel6: <Intel Speed Shift> on cpu6 cpufreq6: <CPU frequency control> on cpu6 hwpstate_intel7: <Intel Speed Shift> on cpu7 cpufreq7: <CPU frequency control> on cpu7 Timecounter "TSC-low" frequency 1403997002 Hz quality 1000 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) ugen0.1: <Intel XHCI root HUB> at usbus0 uhub0 on usbus0 uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 hdacc0: <Realtek ALC235 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC235 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC235 (Internal Analog)> at nid 20 and 18 on hdaa0 pcm1: <Realtek ALC235 (Left Analog Headphones)> at nid 33 on hdaa0 hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 nda0 at nvme0 bus 0 scbus3 target 0 lun 1 nda0: <SAMSUNG MZVLW512HMJP-00000 CXY7501Q S33UNX0J203588> nda0: [_SERIAL_NUMBER_XXXXXXXXXXX] nda0: nvme version 1.2 nda0: 488386MB (1000215216 512 byte sectors) ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ses0: cd0,pass0 in 'Slot 02', SATA Slot: scbus1 target 0 cd0 at ahcich2 bus 0 scbus1 target 0 lun 0 cd0: <Slimtype DVD A DA8AESH XAAM> Removable CD-ROM SCSI device cd0: [_SERIAL_NUMBER_XXXX] 4B6715508655 cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed Trying to mount root from zfs:zroot/ROOT/default []... Root mount waiting for: usbus0 uhub0: 24 ports with 24 removable, self powered ugen0.2: <Logitech USB Optical Mouse> at usbus0 usbhid0 on uhub0 usbhid0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/63.00, addr 1> on usbus0 hidbus0: <HID bus> on usbhid0 Root mount waiting for: usbus0 ugen0.3: <ITE Tech. Inc. ITE Device(8910)> at usbus0 usbhid1 on uhub0 usbhid1: <ITE Tech. Inc. ITE Device(8910), class 0/0, rev 2.00/3.02, addr 2> on usbus0 hidbus1: <HID bus> on usbhid1 hkbd0: <ITE Tech. Inc. ITE Device(8910) Keyboard> on hidbus1 kbd2 at hkbd0 ugen0.4: <vendor 0x8087 product 0x0a2a> at usbus0 ugen0.5: <Azurewave USB2.0 HD UVC WebCam> at usbus0 [drm] Got Intel graphics stolen memory base 0x7c000000, size 0x4000000 drmn1: <drmn> on vgapci1 vgapci1: child drmn1 requested pci_enable_io vgapci1: child drmn1 requested pci_enable_io i915/kbl_dmc_ver1_04.bin: could not load binary firmware /boot/firmware/i915/kbl_dmc_ver1_04.bin either kbl_dmc_ver1_04.bin: could not load binary firmware /boot/firmware/kbl_dmc_ver1_04.bin either i915_kbl_dmc_ver1_04.bin: could not load binary firmware /boot/firmware/i915_kbl_dmc_ver1_04.bin either lkpi_iic0: <LinuxKPI I2C> on drmn1 iicbus0: <Philips I2C bus> on lkpi_iic0 iic0: <I2C generic I/O> on iicbus0 lkpi_iic1: <LinuxKPI I2C> on drmn1 iicbus1: <Philips I2C bus> on lkpi_iic1 iic1: <I2C generic I/O> on iicbus1 lkpi_iic2: <LinuxKPI I2C> on drmn1 iicbus2: <Philips I2C bus> on lkpi_iic2 iic2: <I2C generic I/O> on iicbus2 drmn1: successfully loaded firmware image 'i915/kbl_dmc_ver1_04.bin' drmn1: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) sysctl_add_oid: can't re-use a leaf (hw.dri.debug)! lkpi_iic3: <LinuxKPI I2C> on drm1 iicbus3: <Philips I2C bus> on lkpi_iic3 iic3: <I2C generic I/O> on iicbus3 lkpi_iic4: <LinuxKPI I2C> on drm3 iicbus4: <Philips I2C bus> on lkpi_iic4 iic4: <I2C generic I/O> on iicbus4 [drm] Initialized i915 1.6.0 20201103 for drmn1 on minor 0 VT: Replacing driver "efifb" with new "drmfb". start FB_INFO: height=1080 width=1920 depth=32 pbase=0xb0000000 vbase=0xfffff800b0000000 name=drmn1 id=i915drmfb flags=0x0 stride=7680 end FB_INFO pchtherm0: <Skylake PCH 100 Thermal Subsystem> mem 0xdf52f000-0xdf52ffff at device 20.2 on pci0 ig4iic0: <Intel Sunrise Point-H I2C Controller-0> mem 0xdf52e000-0xdf52efff at device 21.0 on pci0 ig4iic0: Using MSI iicbus5: <Philips I2C bus (ACPI-hinted)> on ig4iic0 iicbus5: <unknown card> at addr 0x15 iic5: <I2C generic I/O> on iicbus5 ichsmb0: <Intel Sunrise Point-H SMBus controller> port 0xf040-0xf05f mem 0xdf52a000-0xdf52a0ff at device 31.4 on pci0 smbus0: <System Management Bus> on ichsmb0 iwm0: <Intel(R) Dual Band Wireless AC 7265> mem 0xdf400000-0xdf401fff at device 0.0 on pci2 iwm7265Dfw: could not load firmware image, error 8 iwm0: hw rev 0x210, fw ver 22.361476.0, address [_MAC_XXXXXXXXXX] rtsx0: <2.1g Realtek RTS5229 PCIe SD Card Reader> mem 0xdf200000-0xdf200fff at device 0.0 on pci4 rtsx0: No card is detected acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: Embedded MOF found acpi_wmi1: <ACPI-WMI mapping> on acpi0 acpi_wmi2: <ACPI-WMI mapping> on acpi0 acpi_wmi3: <ACPI-WMI mapping> on acpi0 hms0: <Logitech USB Optical Mouse> on hidbus0 hms0: 3 buttons and [XYW] coordinates ID=0 hcons0: <ITE Tech. Inc. ITE Device(8910) Consumer Control> on hidbus1 re0: link state changed to UP lo0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP iichid0: <ELAN1200:00 04F3:3045 I2C HID device> at addr 0x15 irq 117 on iicbus5 hidbus2: <HID bus> on iichid0 hms1: <ELAN1200:00 04F3:3045 Mouse> on hidbus2 hms1: 2 buttons and [XYWH] coordinates ID=1 hmt0: <ELAN1200:00 04F3:3045 TouchPad> on hidbus2 hconf0: <ELAN1200:00 04F3:3045 Configuration> on hidbus2 hmt0: Multitouch touchpad with 0 external buttons, click-pad hmt0: 5 contacts with [C] properties. Report range [0:0] - [3200:2198] pflog0: promiscuous mode enabled Security policy loaded: MAC/ntpd (mac_ntpd) pid 3216 (labwc), jid 0, uid 1001: exited on signal 6 (core dumped) pflog0: promiscuous mode disabled Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 0 0 done All buffers synced. Uptime: 3h46m56s ---<<BOOT>>--- Copyright (c) 1992-2025 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 15.0-RELEASE-p8 releng/15.0-n281036-53054229dcb3 GENERIC amd64 FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) VT(efifb): resolution 1920x1080 CPU: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz (2800.00-MHz K8-class CPU) Origin="GenuineIntel" Id=0x906e9 Family=0x6 Model=0x9e Stepping=9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x121<LAHF,ABM,Prefetch> Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 34359738368 (32768 MB) avail memory = 33348902912 (31803 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <_ASUS_ Notebook> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads random: registering fast source Intel Secure Key Seed random: fast provider: "Intel Secure Key Seed" random: unblocking device. ioapic0 <Version 2.0> irqs 0-119 Launching APs: 1 6 7 2 3 4 5 random: entropy device external interface kbd1 at kbdmux0 Fatal trap 3: breakpoint instruction fault while in kernel mode cpuid = 0; apic id = 00 instruction pointer = 0x20:0x7b3cee1c stack pointer = 0x28:0xffffffff82af7ca8 frame pointer = 0x28:0x0 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = interrupt enabled, IOPL = 0 current process = 0 (swapper) rdi: ffffffff82af7d9c rsi: ffffffff81b82701 rdx: 0000000000000000 rcx: 00000000e00fd0dc r8: 0000000000000000 r9: 0000000000000000 rax: 0000000000000000 rbx: ffffffff82af7e58 rbp: 0000000000000000 r10: 00000000e00fd000 r11: 00000000000007ea r12: 00000000000fd0dc r13: fffff800013a511a r14: fffff800013ad440 r15: 0000000000001830 trap number = 3 EFI RT fault breakpoint instruction fault smbios0: <System Management BIOS> at iomem 0x7b2eb000-0x7b2eb017 smbios0: Entry point: v3 (64-bit), Version: 3.0 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> acpi0: <_ASUS_ Notebook> Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.SAT0.PRT0], AE_ALREADY_EXISTS (20250807/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20250807/psobject-372) Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.SAT0.PRT1], AE_ALREADY_EXISTS (20250807/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20250807/psobject-372) Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.SAT0.PRT3], AE_ALREADY_EXISTS (20250807/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20250807/psobject-372) Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.SAT0.PRT4], AE_ALREADY_EXISTS (20250807/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20250807/psobject-372) Firmware Error (ACPI): Failure creating named object [\134_SB.PCI0.SAT0.PRT5], AE_ALREADY_EXISTS (20250807/dswload2-480) ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20250807/psobject-372) acpi_ec0: <Embedded Controller: GPE 0x3, ECDT> port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 24000000 Hz quality 950 Event timer "HPET" frequency 24000000 Hz quality 550 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff at device 0.0 on pci1 vgapci1: <VGA-compatible display> port 0xf000-0xf03f mem 0xdd000000-0xddffffff,0xb0000000-0xbfffffff at device 2.0 on pci0 vgapci1: Boot video device xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xdf510000-0xdf51ffff at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: xECP capabilities <PROTO,PROTO,VEND(c0),LEGACY,VEND(c6),VEND(c7),VEND(c2),DEBUG,VEND(c3),VEND(c4),VEND(c5)> usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdf528000-0xdf529fff,0xdf52c000-0xdf52c0ff,0xdf52b000-0xdf52b7ff at device 23.0 on pci0 ahci0: AHCI v1.31 with 3 6Gbps ports, Port Multiplier not supported ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pci2: <network> at device 0.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0 pci3: <ACPI PCI bus> on pcib3 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xdf304000-0xdf304fff,0xdf300000-0xdf303fff at device 0.0 on pci3 re0: Using 1 MSI-X message re0: ASPM disabled re0: Chip rev. 0x54000000 re0: MAC rev. 0x00100000 miibus0: <MII bus> on re0 rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: [_MAC_XXXXXXXXXX] re0: netmap queues/slots: TX 1/256, RX 1/256 pcib4: <ACPI PCI-PCI bridge> at device 28.6 on pci0 pci4: <ACPI PCI bus> on pcib4 pci4: <unknown> at device 0.0 (no driver attached) pcib5: <ACPI PCI-PCI bridge> at device 29.0 on pci0 pci5: <ACPI PCI bus> on pcib5 nvme0: <Generic NVMe Device> mem 0xdf100000-0xdf103fff at device 0.0 on pci5 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 pci0: <memory> at device 31.2 (no driver attached) hdac0: <Intel Kaby Lake HDA Controller> mem 0xdf520000-0xdf523fff,0xdf500000-0xdf50ffff at device 31.3 on pci0 acpi_button0: <Sleep Button> on acpi0 acpi_button1: <Power Button> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 16. hwpstate_intel0: <Intel Speed Shift> on cpu0 cpufreq0: <CPU frequency control> on cpu0 hwpstate_intel1: <Intel Speed Shift> on cpu1 cpufreq1: <CPU frequency control> on cpu1 hwpstate_intel2: <Intel Speed Shift> on cpu2 cpufreq2: <CPU frequency control> on cpu2 hwpstate_intel3: <Intel Speed Shift> on cpu3 cpufreq3: <CPU frequency control> on cpu3 hwpstate_intel4: <Intel Speed Shift> on cpu4 cpufreq4: <CPU frequency control> on cpu4 hwpstate_intel5: <Intel Speed Shift> on cpu5 cpufreq5: <CPU frequency control> on cpu5 hwpstate_intel6: <Intel Speed Shift> on cpu6 cpufreq6: <CPU frequency control> on cpu6 hwpstate_intel7: <Intel Speed Shift> on cpu7 cpufreq7: <CPU frequency control> on cpu7 Timecounter "TSC-low" frequency 1403997128 Hz quality 1000 Timecounters tick every 1.000 msec ZFS filesystem version: 5 ZFS storage pool version: features support (5000) ugen0.1: <Intel XHCI root HUB> at usbus0 uhub0 on usbus0 uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 hdacc0: <Realtek ALC235 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC235 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC235 (Internal Analog)> at nid 20 and 18 on hdaa0 pcm1: <Realtek ALC235 (Left Analog Headphones)> at nid 33 on hdaa0 hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0 hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1 pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1 nda0 at nvme0 bus 0 scbus3 target 0 lun 1 nda0: <SAMSUNG MZVLW512HMJP-00000 CXY7501Q S33UNX0J203588> nda0: [_SERIAL_NUMBER_XXXXXXXXXXX] nda0: nvme version 1.2 nda0: 488386MB (1000215216 512 byte sectors) ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ses0: cd0,pass0 in 'Slot 02', SATA Slot: scbus1 target 0 cd0 at ahcich2 bus 0 scbus1 target 0 lun 0 cd0: <Slimtype DVD A DA8AESH XAAM> Removable CD-ROM SCSI device cd0: [_SERIAL_NUMBER_XXXX] 4B6715508655 cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed Trying to mount root from zfs:zroot/ROOT/default []... Root mount waiting for: usbus0 uhub0: 24 ports with 24 removable, self powered ugen0.2: <Logitech USB Optical Mouse> at usbus0 usbhid0 on uhub0 usbhid0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/63.00, addr 1> on usbus0 hidbus0: <HID bus> on usbhid0 Root mount waiting for: usbus0 ugen0.3: <ITE Tech. Inc. ITE Device(8910)> at usbus0 usbhid1 on uhub0 usbhid1: <ITE Tech. Inc. ITE Device(8910), class 0/0, rev 2.00/3.02, addr 2> on usbus0 hidbus1: <HID bus> on usbhid1 hkbd0: <ITE Tech. Inc. ITE Device(8910) Keyboard> on hidbus1 kbd2 at hkbd0 ugen0.4: <vendor 0x8087 product 0x0a2a> at usbus0 ugen0.5: <Azurewave USB2.0 HD UVC WebCam> at usbus0 [drm] Got Intel graphics stolen memory base 0x7c000000, size 0x4000000 drmn1: <drmn> on vgapci1 vgapci1: child drmn1 requested pci_enable_io vgapci1: child drmn1 requested pci_enable_io i915/kbl_dmc_ver1_04.bin: could not load binary firmware /boot/firmware/i915/kbl_dmc_ver1_04.bin either kbl_dmc_ver1_04.bin: could not load binary firmware /boot/firmware/kbl_dmc_ver1_04.bin either i915_kbl_dmc_ver1_04.bin: could not load binary firmware /boot/firmware/i915_kbl_dmc_ver1_04.bin either lkpi_iic0: <LinuxKPI I2C> on drmn1 iicbus0: <Philips I2C bus> on lkpi_iic0 iic0: <I2C generic I/O> on iicbus0 lkpi_iic1: <LinuxKPI I2C> on drmn1 iicbus1: <Philips I2C bus> on lkpi_iic1 iic1: <I2C generic I/O> on iicbus1 lkpi_iic2: <LinuxKPI I2C> on drmn1 iicbus2: <Philips I2C bus> on lkpi_iic2 iic2: <I2C generic I/O> on iicbus2 drmn1: successfully loaded firmware image 'i915/kbl_dmc_ver1_04.bin' drmn1: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) sysctl_add_oid: can't re-use a leaf (hw.dri.debug)! lkpi_iic3: <LinuxKPI I2C> on drm1 iicbus3: <Philips I2C bus> on lkpi_iic3 iic3: <I2C generic I/O> on iicbus3 lkpi_iic4: <LinuxKPI I2C> on drm3 iicbus4: <Philips I2C bus> on lkpi_iic4 iic4: <I2C generic I/O> on iicbus4 [drm] Initialized i915 1.6.0 20201103 for drmn1 on minor 0 VT: Replacing driver "efifb" with new "drmfb". start FB_INFO: height=1080 width=1920 depth=32 pbase=0xb0000000 vbase=0xfffff800b0000000 name=drmn1 id=i915drmfb flags=0x0 stride=7680 end FB_INFO pchtherm0: <Skylake PCH 100 Thermal Subsystem> mem 0xdf52f000-0xdf52ffff at device 20.2 on pci0 ig4iic0: <Intel Sunrise Point-H I2C Controller-0> mem 0xdf52e000-0xdf52efff at device 21.0 on pci0 ig4iic0: Using MSI iicbus5: <Philips I2C bus (ACPI-hinted)> on ig4iic0 iicbus5: <unknown card> at addr 0x15 iic5: <I2C generic I/O> on iicbus5 ichsmb0: <Intel Sunrise Point-H SMBus controller> port 0xf040-0xf05f mem 0xdf52a000-0xdf52a0ff at device 31.4 on pci0 smbus0: <System Management Bus> on ichsmb0 iwm0: <Intel(R) Dual Band Wireless AC 7265> mem 0xdf400000-0xdf401fff at device 0.0 on pci2 iwm7265Dfw: could not load firmware image, error 8 iwm0: hw rev 0x210, fw ver 22.361476.0, address [_MAC_XXXXXXXXXX] rtsx0: <2.1g Realtek RTS5229 PCIe SD Card Reader> mem 0xdf200000-0xdf200fff at device 0.0 on pci4 rtsx0: No card is detected acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: Embedded MOF found acpi_wmi1: <ACPI-WMI mapping> on acpi0 acpi_wmi2: <ACPI-WMI mapping> on acpi0 acpi_wmi3: <ACPI-WMI mapping> on acpi0 hms0: <Logitech USB Optical Mouse> on hidbus0 hms0: 3 buttons and [XYW] coordinates ID=0 hcons0: <ITE Tech. Inc. ITE Device(8910) Consumer Control> on hidbus1 re0: link state changed to UP lo0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP iichid0: <ELAN1200:00 04F3:3045 I2C HID device> at addr 0x15 irq 117 on iicbus5 hidbus2: <HID bus> on iichid0 hms1: <ELAN1200:00 04F3:3045 Mouse> on hidbus2 hms1: 2 buttons and [XYWH] coordinates ID=1 hmt0: <ELAN1200:00 04F3:3045 TouchPad> on hidbus2 hconf0: <ELAN1200:00 04F3:3045 Configuration> on hidbus2 hmt0: Multitouch touchpad with 0 external buttons, click-pad hmt0: 5 contacts with [C] properties. Report range [0:0] - [3200:2198] pflog0: promiscuous mode enabled