Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2026-07-18 16:55:34
From: Joel Carnat
Description: NetBSD 11.0_RC6/i386 on Lenovo Ideapad S10
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
2024, 2025, 2026
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 11.0_RC6 (GENERIC) #0: Tue Jul 7 15:10:39 UTC 2026
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/i386/compile/GENERIC
total memory = 2038 MB
avail memory = 1977 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
ACPI: RSDP 0x00000000000F7A10 000024 (v02 PTLTD )
ACPI: XSDT 0x000000007F6DA14F 00007C (v01 LENOVO CB-01 06040000 LTP 00000000)
ACPI: FACP 0x000000007F6E1D4D 0000F4 (v03 INTEL CALISTGA 06040000 ALAN 00000001)
ACPI: DSDT 0x000000007F6DB349 006990 (v01 INTEL CALISTGA 06040000 INTL 20061109)
ACPI: FACS 0x000000007F6E2FC0 000040
ACPI: HPET 0x000000007F6E1E41 000038 (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
ACPI: MCFG 0x000000007F6E1E79 00003C (v01 INTEL CALISTGA 06040000 LOHR 0000005A)
ACPI: TCPA 0x000000007F6E1EB5 000032 (v01 PTLTD CALISTGA 06040000 PTL 00000001)
ACPI: TMOR 0x000000007F6E1EE7 000026 (v01 PTLTD 06040000 PTL 00000003)
ACPI: APIC 0x000000007F6E1F0D 000068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT 0x000000007F6E1F75 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: ASF! 0x000000007F6E1F9D 000063 (v16 CETP CETP 06040000 PTL 00000001)
ACPI: SSDT 0x000000007F6DA767 00025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT 0x000000007F6DA6C1 0000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
ACPI: SSDT 0x000000007F6DA1CB 0004F6 (v02 PmRef CpuPm 00003000 INTL 20050624)
ACPI: 4 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Use lfence to serialize rdtsc
cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz, id 0x106c2
cpu0: node 0, package 0, core 0, smt 0
cpu1 at mainbus0 apid 1
cpu1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz, id 0x106c2
cpu1: node 0, package 0, core 0, smt 1
acpi0 at mainbus0: Intel ACPICA 20241212
acpi0: X/RSDT: OemId <LENOVO,CB-01 ,06040000>, AslId < LTP,00000000>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000C4230084 000245 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000C4231004 0005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000C41A7904 0000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0x00000000C41D1584 000085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09-1): io 0x62,0x66
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0240): ACPI Display Output Device
acpiout2 at acpivga0 (DD03, 0x0320): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0410): ACPI Display Output Device
acpiout3: brightness levels: [5,15,25,35,45,55,65,75,85,95,100]
acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout0): VGA Analog Monitor, index 0, port 0, head 0, bios detect
acpivga0: 0x0240 (acpiout1): TV/HDTV Monitor, index 0, port 4, head 0, bios detect
acpivga0: 0x0320 (acpiout2): Ext. Digital Monitor, index 0, port 2, head 0, bios detect
acpivga0: 0x0410 (acpiout3): Int. Digital Flat Panel, index 0, port 1, head 0, bios detect
MATH (PNP0C04) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
VPC0 (VPC2004) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN1024) (aux port): irq 12
acpiwmi0 at acpi0 (WMI2, PNP0C14-0): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpitz0 at acpi0 (TZ00): cpu0 cpu1
acpitz0: levels: critical 86.0 C, passive 80.0 C, passive cooling
apm0 at acpi0: Power Management spec V1.2
ACPI: Enabled 4 GPEs in block 00 to 1F
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 7.2
pms0: Extended W mode, Palm detect, Multi-finger Report, Reports max
pms0: Probed max coordinates right: 5878, top: 5888
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel 82945GME Host Bridge (rev. 0x03)
agp0 at pchb0: i915-family chipset
agp0: detected 7932k stolen memory
agp0: aperture at 0xd0000000, size 0x10000000
i915drmkms0 at pci0 dev 2 function 0: Intel 82945GME Integrated Graphics Device (rev. 0x03)
Intel 82945GM/PM/GMS Integrated Graphics Device (miscellaneous display, revision 0x03) at pci0 dev 2 function 1 not configured
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
hdafg0 at hdaudio0: Realtek ALC269
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack] [Built-In]
hdafg0: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
ppb0 at pci0 dev 28 function 0: Intel 82801GB/GR PCI Express Port #1 (rev. 0x02)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci1 dev 0 function 0: Broadcom BCM5906M Fast Ethernet
bge0: interrupting at msi1 vec 0
bge0: HW config 00000000, 00000000, 00000000, 00000000 00000000
bge0: ASIC BCM5906 A2 (0xc002), Ethernet address [_MAC_XXXXXXXXXX]
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5906 10/100baseTX media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb1 at pci0 dev 28 function 1: Intel 82801GB/GR PCI Express Port #2 (rev. 0x02)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 2: Intel 82801GB/GR PCI Express Port #3 (rev. 0x02)
ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 4
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
iwn0 at pci3 dev 0 function 0: Intel Centrino Advanced-N 6205 WiFi (rev. 0x34)
iwn0: interrupting at msi2 vec 0
iwn0: MIMO 2T2R, MoW, address [_MAC_XXXXXXXXXX]
uhci0 at pci0 dev 29 function 0: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci0: interrupting at ioapic0 pin 23
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 3: Intel 82801GB/GR USB UHCI Controller (rev. 0x02)
uhci3: interrupting at ioapic0 pin 16
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 29 function 7: Intel 82801GB/GR USB EHCI Controller (rev. 0x02)
ehci0: 64-bit DMA - limited
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: 4 companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
ehci0: Using DMA subregion for control data structures
usb4 at ehci0: USB revision 2.0
ppb3 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xe2)
pci4 at ppb3 bus 5
pci4: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: Intel 82801GBM LPC Interface Bridge (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
piixide0 at pci0 dev 31 function 1: Intel 82801GB/GR IDE Controller (ICH7) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
piixide1 at pci0 dev 31 function 2: Intel 82801GBM/GHM Serial ATA Controller (ICH7) (rev. 0x02)
piixide1: bus-master DMA support present
piixide1: primary channel configured to native-PCI mode
piixide1: using ioapic0 pin 19 for native-PCI interrupt
atabus1 at piixide1 channel 0
piixide1: secondary channel configured to native-PCI mode
atabus2 at piixide1 channel 1
ichsmb0 at pci0 dev 31 function 3: Intel 82801GB/GR SMBus Controller (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 20 us, pow 500 mW
acpicpu0: C3: FFH, lat 100 us, pow 100 mW, bus master check
acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 1600 MHz
acpicpu0: P1: FFH, lat 10 us, pow 28000 mW, 1333 MHz
acpicpu0: P2: FFH, lat 10 us, pow 22000 mW, 1067 MHz
acpicpu0: P3: FFH, lat 10 us, pow 16000 mW, 800 MHz
acpicpu0: T0: FFH, lat 1 us, pow 16000 mW, 100 %
acpicpu0: T1: FFH, lat 1 us, pow 14000 mW, 88 %
acpicpu0: T2: FFH, lat 1 us, pow 12000 mW, 75 %
acpicpu0: T3: FFH, lat 1 us, pow 10000 mW, 63 %
acpicpu0: T4: FFH, lat 1 us, pow 8000 mW, 50 %
acpicpu0: T5: FFH, lat 1 us, pow 6000 mW, 38 %
acpicpu0: T6: FFH, lat 1 us, pow 4000 mW, 25 %
acpicpu0: T7: FFH, lat 1 us, pow 2000 mW, 13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=90
acpicpu1 at cpu1: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
IPsec: Initialized Security Association Processing.
uhub0 at usb0: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
acpibat0: Sanyo LION rechargeable battery
acpibat0: granularity: low->warn 0.010 Ah, warn->full 0.025 Ah
uvideo0 at uhub4 port 3 configuration 1 interface 0: BISON Corporation (0x5986) Lenovo EasyCamera (0x0241), rev 2.00/14.03, addr 2
video0 at uvideo0: BISON Corporation (0x5986) Lenovo EasyCamera (0x0241), rev 2.00/14.03, addr 2
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: Logitech (0x046d) USB Receiver (0xc52b), rev 2.00/12.11, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
uhidev1 at uhub0 port 2 configuration 1 interface 1
uhidev1: Logitech (0x046d) USB Receiver (0xc52b), rev 2.00/12.11, addr 2, iclass 3/1
uhidev1: 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, W and Z dirs
wsmouse1 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub0 port 2 configuration 1 interface 2
uhidev2: Logitech (0x046d) USB Receiver (0xc52b), rev 2.00/12.11, addr 2, iclass 3/0
uhidev2: 33 report ids
uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
wd0 at atabus1 drive 0
wd0: <KINGSTON SA400S37240G>
wd0: drive supports 1-sector PIO transfers, LBA48 addressing
wd0: 223 GB, 465141 cyl, 16 head, 63 sec, 512 bytes/sect x 468862128 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA), WRITE DMA FUA EXT
umass0 at uhub4 port 5 configuration 1 interface 0
umass0: Generic (0x0bda) USB2.0-CRW (0x0158), rev 2.00/58.87, addr 3
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Generic-, Multi-Card, 1.00> disk removable
sd0: drive offline
swwdog0: software watchdog initialized
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/i386/11.0/modules
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] Failed to find VBIOS tables (VBT)
i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0)
[drm] Initialized overlay support.
[drm] Initialized i915 1.6.0 20200114 for i915drmkms0 on minor 0
intelfb0 at i915drmkms0
[drm] DRM_I915_DEBUG enabled
[drm] DRM_I915_DEBUG_GEM enabled
intelfb0: framebuffer at 0xd0009000, size 1024x600, depth 32, stride 4096
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wskbd1: connecting to wsdisplay0
ubt0 at uhub1 port 2
ubt0: Broadcom Corp (0x0a5c) Acer Module (0x2101), rev 2.00/1.00, addr 2
acpibat0: normal capacity on 'charge state'
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)