Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2026-07-22 21:38:01
From: cloudy
Description: FreeBSD/amd64 on Gigabyte Technology Co., Ltd. Z370 HD3P
---<<BOOT>>--- Copyright (c) 1992-2025 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 15.0-RELEASE releng/15.0-n280995-7aedc8de6446 GENERIC amd64 FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) VT(vga): resolution 640x480 CPU: Intel(R) Core(TM) i5-8400 CPU @ 2.80GHz (2800.00-MHz K8-class CPU) Origin="GenuineIntel" Id=0x906ea Family=0x6 Model=0x9e Stepping=10 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x121<LAHF,ABM,Prefetch> Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE> Structured Extended Features2=0x40000000<SGXLC> Structured Extended Features3=0x9c002600<MCUOPT,MD_CLEAR,TSXFA,IBPB,STIBP,L1DFL,SSBD> XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8255246336 (7872 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I> FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs FreeBSD/SMP: 1 package(s) x 6 core(s) random: registering fast source Intel Secure Key Seed random: fast provider: "Intel Secure Key Seed" random: unblocking device. ioapic0 <Version 2.0> irqs 0-119 Launching APs: 5 1 2 3 4 random: entropy device external interface kbd1 at kbdmux0 Fatal trap 3: breakpoint instruction fault while in kernel mode cpuid = 0; apic id = 00 instruction pointer = 0x20:0xdefbe410 stack pointer = 0x28:0xffffffff82b2dca8 frame pointer = 0x28:0x0 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = interrupt enabled, IOPL = 0 current process = 0 (swapper) rdi: ffffffff82b2dd9c rsi: ffffffff81b82701 rdx: 0000000000000000 rcx: 00000000f80fd0dc r8: 0000000000000000 r9: 0000000000000000 rax: 0000000000000000 rbx: ffffffff82b2de58 rbp: 0000000000000000 r10: 00000000f80fd000 r11: 00000000000007ea r12: 00000000000fd0dc r13: fffff800013e0a1a r14: fffff800012f62c0 r15: 0000000000001830 trap number = 3 EFI RT fault breakpoint instruction fault vtvga0: <VT VGA driver> smbios0: <System Management BIOS> at iomem 0xdeb91000-0xdeb91017 smbios0: Entry point: v3 (64-bit), Version: 3.1 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> acpi0: <ALASKA A M I> acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 24000000 Hz quality 950 Event timer "HPET" frequency 24000000 Hz quality 550 Event timer "HPET1" frequency 24000000 Hz quality 440 Event timer "HPET2" frequency 24000000 Hz quality 440 atrtc1: <AT realtime clock> on acpi0 atrtc1: Warning: Couldn't map I/O. atrtc1: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 xhci0: <Intel Union Point USB 3.0 controller> mem 0xf7f30000-0xf7f3ffff at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: xECP capabilities <PROTO,PROTO,VEND(c0),LEGACY,VEND(c6),VEND(c7),VEND(c2),DEBUG,VEND(c3),VEND(c4),VEND(c5)> usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) ahci0: <Intel Union Point AHCI SATA controller> port 0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf7f48000-0xf7f49fff,0xf7f4c000-0xf7f4c0ff,0xf7f4b000-0xf7f4b7ff at device 23.0 on pci0 ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 pcib1: <ACPI PCI-PCI bridge> at device 27.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 27.2 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2 pci3: <ACPI PCI bus> on pcib3 pci3: <simple comms> at device 0.0 (no driver attached) pcib4: <ACPI PCI-PCI bridge> at device 27.3 on pci0 pci4: <ACPI PCI bus> on pcib4 pcib5: <ACPI PCI-PCI bridge> at device 27.4 on pci0 pci5: <ACPI PCI bus> on pcib5 nvme0: <Generic NVMe Device> mem 0xf7d00000-0xf7d03fff at device 0.0 on pci5 pcib6: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci6: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> at device 28.2 on pci0 pci7: <ACPI PCI bus> on pcib7 pcib8: <ACPI PCI-PCI bridge> at device 28.3 on pci0 pci8: <ACPI PCI bus> on pcib8 pcib9: <ACPI PCI-PCI bridge> at device 28.4 on pci0 pci9: <ACPI PCI bus> on pcib9 xhci1: <XHCI (generic) USB 3.0 controller> mem 0xf7c00000-0xf7c07fff at device 0.0 on pci9 xhci1: 32 bytes context size, 64-bit DMA xhci1: xECP capabilities <LEGACY,PROTO,PROTO,DEBUG> usbus1 on xhci1 usbus1: 5.0Gbps Super Speed USB v3.0 pcib10: <ACPI PCI-PCI bridge> at device 28.6 on pci0 pci10: <ACPI PCI bus> on pcib10 pcib11: <ACPI PCI-PCI bridge> at device 29.0 on pci0 pci11: <ACPI PCI bus> on pcib11 nvme1: <Generic NVMe Device> mem 0xf7b00000-0xf7b03fff at device 0.0 on pci11 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 pci0: <memory> at device 31.2 (no driver attached) hdac0: <Intel Kaby Lake-H HDA Controller> mem 0xf7f40000-0xf7f43fff,0xf7f20000-0xf7f2ffff at device 31.3 on pci0 em0: <Intel(R) I219-V SPT-H(2)> mem 0xf7f00000-0xf7f1ffff at device 31.6 on pci0 em0: EEPROM V0.2-4 em0: Using 1024 TX descriptors and 1024 RX descriptors em0: Using an MSI interrupt em0: Ethernet address: [_MAC_XXXXXXXXXX] em0: netmap queues/slots: TX 1/1024, RX 1/1024 acpi_button0: <Sleep Button> on acpi0 acpi_button1: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 acpi_tz2: <Thermal Zone> on acpi0 ppc0: <Parallel port> port 0x378-0x37f irq 5 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] uart: ns8250: UART FCR is broken (0x1) uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s atrtc0: Can't map interrupt. atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 16. hwpstate_intel0: <Intel Speed Shift> on cpu0 cpufreq0: <CPU frequency control> on cpu0 hwpstate_intel1: <Intel Speed Shift> on cpu1 cpufreq1: <CPU frequency control> on cpu1 hwpstate_intel2: <Intel Speed Shift> on cpu2 cpufreq2: <CPU frequency control> on cpu2 hwpstate_intel3: <Intel Speed Shift> on cpu3 cpufreq3: <CPU frequency control> on cpu3 hwpstate_intel4: <Intel Speed Shift> on cpu4 cpufreq4: <CPU frequency control> on cpu4 hwpstate_intel5: <Intel Speed Shift> on cpu5 cpufreq5: <CPU frequency control> on cpu5 Timecounter "TSC-low" frequency 1403996970 Hz quality 1000 Timecounters tick every 1.000 msec ugen0.1: <Intel XHCI root HUB> at usbus0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) ugen1.1: <(0x1b21) XHCI root HUB> at usbus1 uhub0 on usbus0 uhub0: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub1 on usbus1 uhub1: <(0x1b21) XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 nvme1: Allocated 64MB host memory buffer hdacc0: <Realtek ALC1220 HDA CODEC> at cad 0 on hdac0 hdaa0: <Realtek ALC1220 Audio Function Group> at nid 1 on hdacc0 pcm0: <Realtek ALC1220 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0 pcm1: <Realtek ALC1220 (Front Analog)> at nid 27 and 25 on hdaa0 pcm2: <Realtek ALC1220 (Onboard Digital)> at nid 30 on hdaa0 Trying to mount root from zfs:zfuckingroot/ROOT/default []... nda0 at nvme0 bus 0 scbus7 target 0 lun 1 nda0: <SK hynix PC801 HFS512GEJ9X101N HPS1 AYC2N014019802H1M> nda0: [_SERIAL_NUMBER_XXXXXXXXXXXXXX] nda0: nvme version 1.4 nda0: 488386MB (1000215216 512 byte sectors) nda1 at nvme1 bus 0 scbus8 target 0 lun 1 nda1: <JAMESDONKEY JD512 512GB JD2021 AA000000000000000041> nda1: [_SERIAL_NUMBER_XXXXXXXXXXXXXXXXX] nda1: nvme version 1.3 nda1: 488386MB (1000215216 512 byte sectors) ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <TOSHIBA HDWD110 MS2OA8J0> ATA8-ACS SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXX] ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors) ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <WDC WD2500BEVS-26UST0 01.01A01> ATA8-ACS SATA 1.x device ada1: [_SERIAL_NUMBER_XXXXXXXXXXXX] ada1: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 238475MB (488397168 512 byte sectors) ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 ada2: <Hitachi HDS721616PLA380 P22OA70A> ATA-7 SATA 2.x device ada2: [_SERIAL_NUMBER_XXXXXXXXXXX] ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 152627MB (312581808 512 byte sectors) ada3 at ahcich5 bus 0 scbus5 target 0 lun 0 ada3: <ST9500530NS 81Y9727 81Y3857IBM BE1A> ATA8-ACS SATA 2.x device ada3: [_SERIAL_NUMBER_XXXXX] ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada3: Command Queueing enabled ada3: 476940MB (976773168 512 byte sectors) ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 ses0: ada1,pass1 in 'Slot 01', SATA Slot: scbus1 target 0 ses0: ada2,pass2 in 'Slot 02', SATA Slot: scbus2 target 0 ses0: ada3,pass3 in 'Slot 05', SATA Slot: scbus5 target 0 GEOM: ada0: the primary GPT table is corrupt or invalid. GEOM: ada0: using the secondary instead -- recovery strongly advised. uhub1: 4 ports with 4 removable, self powered ugen1.2: <Linux 6.18.34+rpt-rpi-v6 with 20980000.usb RNDIS/Ethernet Gadget> at usbus1 uhub0: 26 ports with 26 removable, self powered ichsmb0: <Intel Kaby Lake SMBus controller> port 0xf000-0xf01f mem 0xf7f4a000-0xf7f4a0ff at device 31.4 on pci0 smbus0: <System Management Bus> on ichsmb0 acpi_wmi0: <ACPI-WMI mapping> on acpi0 acpi_wmi0: cannot find EC device acpi_wmi0: Embedded MOF found em0: link state changed to UP lo0: link state changed to UP em0: link state changed to DOWN em0: link state changed to UP urndis0 on uhub1 urndis0: <Linux 6.18.34+rpt-rpi-v6 with 20980000.usb RNDIS/Ethernet Gadget, class 2/0, rev 2.00/6.18, addr 1> on usbus1 ue0: <USB Ethernet> on urndis0 ue0: Ethernet address: [_MAC_XXXXXXXXXX]