Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2026-08-06 12:04:10
From: StefanoBSDCafe
Description: Raspberry PI Zero W
The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 10.1 (RPI) #0: Mon Dec 16 13:08:11 UTC 2024 [ 1.000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/evbarm/compile/RPI [ 1.000000] total memory = 448 MB [ 1.000000] avail memory = 429 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] Kernelized RAIDframe activated [ 1.000000] armfdt0 (root) [ 1.000000] simplebus0 at armfdt0: Raspberry Pi Zero W Rev 1.1 [ 1.000000] simplebus1 at simplebus0 [ 1.000000] simplebus2 at simplebus0 [ 1.000000] simplebus3 at simplebus0 [ 1.000000] cpus0 at simplebus0 [ 1.000000] cpu0 at cpus0: 700 MHz ARM1176JZ-S r0p7 (ARM11J V6ZK core) [ 1.000000] cpu0: DC enabled IC enabled WB enabled LABT [ 1.000000] cpu0: L1 16KB/32B 4-way (128 set) VIPT Instruction cache [ 1.000000] cpu0: L1 16KB/32B 4-way (128 set) write-back-locking-C VIPT Data cache [ 1.000000] vfp0 at cpu0: VFP11, rounding, exceptions [ 1.000000] fclock0 at simplebus2: 19200000 Hz fixed clock (osc) [ 1.000000] fclock1 at simplebus2: 480000000 Hz fixed clock (otg) [ 1.000000] bcmicu0 at simplebus1 [ 1.000000] bcmcprman0 at simplebus1: BCM283x Clock Controller [ 1.000000] bcmtmr0 at simplebus1: VC System Timer [ 1.000000] bcmtmr0: interrupting on icu irq 3 [ 1.000000] bcmaux0 at simplebus1 [ 1.000000] /soc/thermal@7e212000 at simplebus1 not configured [ 1.000000] bcmgpio0 at simplebus1: GPIO controller 2835 [ 1.000000] bcmgpio0: pins 0..31 interrupting on icu irq 49 [ 1.000000] bcmgpio0: pins 32..54 interrupting on icu irq 50 [ 1.000000] gpio0 at bcmgpio0: 54 pins [ 1.000000] bcmdmac0 at simplebus1: DMA0 DMA2 DMA4 DMA5 DMA6 DMA7 DMA8 DMA9 DMA10 DMA11 [ 1.000000] /soc/power at simplebus1 not configured [ 1.000000] /wifi-pwrseq at simplebus0 not configured [ 1.000000] /phy at simplebus0 not configured [ 1.000000] bsciic0 at simplebus1: Broadcom Serial Controller [ 1.000000] bsciic0: interrupting on icu irq 53 [ 1.000000] iic0 at bsciic0: I2C bus [ 1.000000] bcmmbox0 at simplebus1: VC mailbox [ 1.000000] bcmmbox0: interrupting on icu irq 65 [ 1.000000] vcmbox0 at bcmmbox0 [ 1.000000] /soc/firmware at simplebus1 not configured [ 1.000000] /soc/txp@7e004000 at simplebus1 not configured [ 1.000000] plcom0 at simplebus1: ARM PL011 UART [ 1.000000] plcom0: txfifo disabled [ 1.000000] plcom0: interrupting on icu irq 57 [ 1.000000] bcmsdhost0 at simplebus1: SD HOST controller [ 1.000000] bcmsdhost0: interrupting on icu irq 56 [ 1.000000] bsciic1 at simplebus1: Broadcom Serial Controller [ 1.000000] bsciic1: interrupting on icu irq 53 [ 1.000000] iic1 at bsciic1: I2C bus [ 1.000000] com0 at simplebus1: BCM AUX UART, 1-byte FIFO [ 1.000000] com0: console [ 1.000000] com0: interrupting on icu irq 29 [ 1.000000] sdhc0 at simplebus1: SDHC controller [ 1.000000] sdhc0: interrupting on icu irq 62 [ 1.000000] bsciic2 at simplebus1: Broadcom Serial Controller [ 1.000000] bsciic2: interrupting on icu irq 53 [ 1.000000] iic2 at bsciic2: I2C bus [ 1.000000] dwctwo0 at simplebus1: USB controller [ 1.000000] dwctwo0: interrupting on icu irq 9 [ 1.000000] bcmpmwdog0 at simplebus1: Power management, Reset and Watchdog controller [ 1.000000] /soc/vec@7e806000 at simplebus1 not configured [ 1.000000] /soc/hdmi@7e902000 at simplebus1 not configured [ 1.000000] /soc/gpu at simplebus1 not configured [ 1.000000] genfb0 at simplebus1 [ 1.000000] genfb0: framebuffer at 0x5e876000, size 1280x720, depth 32, stride 5120 [ 1.000000] wsdisplay0 at genfb0 kbdmux 1 [ 1.000000] wsmux1: connecting to wsdisplay0 [ 1.000000] wsdisplay0: screen 0-3 added (default, vt100 emulation) [ 1.000000] vchiq0 at simplebus1: BCM2835 VCHIQ [ 1.000000] /arm-pmu at simplebus0 not configured [ 1.000000] gpioleds0 at simplebus0: ACT [ 1.000000] bcmrng0 at simplebus1: RNG [ 1.000000] entropy: ready [ 1.000000] timecounter: Timecounter "bcmtmr0" frequency 1000000 Hz quality 100 [ 1.000003] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.040002] sdmmc0 at bcmsdhost0 [ 1.040002] sdhc0: SDHC 3.0, rev 153, caps <01610000/00000000>, platform DMA, 200000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks [ 1.051160] sdmmc1 at sdhc0 slot 0 [ 1.061293] dwctwo0: Core Release: 2.80a (snpsid=4f54280a) [ 1.061293] usb0 at dwctwo0: USB revision 2.0 [ 1.081354] uhub0 at usb0: NetBSD (0x0000) DWC2 root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.081354] uhub0: 1 port with 1 removable, self powered [ 1.091382] IPsec: Initialized Security Association Processing. [ 1.161496] sdmmc0: direct I/O error 5, r=6 p=0xc9af2f2c write [ 1.181523] sdmmc0: SD card status: 4-bit, C10, U1, V10, A1 [ 1.181523] ld0 at sdmmc0: <0x27:0x5048:SD16G:0x60:0xda4336f8:0x143> [ 1.192920] ld0: 14772 MB, 7503 cyl, 64 head, 63 sec, 512 bytes/sect x 30253056 sectors [ 1.204987] ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz [ 1.295112] sdmmc1: 4-bit width, 50.000 MHz [ 1.305560] bwfm0 at sdmmc1 function 1 [ 1.315589] (manufacturer 0x2d0, product 0xa9a6) at sdmmc1 function 2 not configured [ 1.325621] swwdog0: software watchdog initialized [ 1.325621] boot device: ld0 [ 1.336860] root on ld0a dumps on ld0b [ 1.336860] root file system type: ffs [ 1.347615] kern.module.path=/stand/evbarm/10.1/modules [ 1.357646] vchiq0: interrupting on icu irq 66 [ 1.357646] vchiq: vchiq_init_state: slot_zero = 0xc9b40000, is_master = 0 [ 1.357646] vchiq: local ver 8 (min 3), remote ver 8. [ 1.357646] vcaudio0 at vchiq0: auds [ 1.369246] bwfm0: Firmware file default: brcmfmac43430-sdio.bin [ 1.369246] bwfm0: Firmware file model-spec: brcmfmac43430-sdio.raspberrypi,model-zero-w.bin [ 1.369246] WARNING: no TOD clock present [ 1.369246] WARNING: using filesystem time [ 1.378127] WARNING: CHECK AND RESET THE DATE! [ 1.382631] audio0 at vcaudio0: playback [ 1.382631] audio0: slinear_le:16 -> slinear_le:16 2ch 48000Hz, blk 7680 bytes (40ms) for playback [ 1.396638] spkr0 at audio0: PC Speaker (synthesized) [ 1.396638] wsbell at spkr0 not configured [ 1.426702] bwfm0: Found Firmware file: brcmfmac43430-sdio.bin [ 1.446752] bwfm0: NVRAM file default: brcmfmac43430-sdio.txt [ 1.446752] bwfm0: NVRAM file model-spec: brcmfmac43430-sdio.raspberrypi,model-zero-w.txt [ 1.446752] bwfm0: Found NVRAM file: brcmfmac43430-sdio.raspberrypi,model-zero-w.txt [ 1.446752] bwfm0: CLM file default: brcmfmac43430-sdio.clm_blob [ 1.446752] bwfm0: CLM file model-spec: brcmfmac43430-sdio.raspberrypi,model-zero-w.clm_blob [ 3.178473] bwfm0: CHIPACTIVE [ 3.278554] bwfm0: address [_MAC_XXXXXXXXXX] [ 3.278554] bwfm0: wl0: Oct 23 2017 03:55:53 version[_IP_XXXXX] (r674442 CY) FWID 01-e58d219f [ 44.622483] wsdisplay0: screen 4 added (default, vt100 emulation) [ 125.173952] ure0 at uhub0 port 1 [ 125.173952] ure0: Realtek (0x0bda) USB 10/100/1000 LAN (0x8153), rev 2.10/30.00, addr 2 [ 125.185983] ure0: RTL8153 ver 5c30 [ 125.246091] rgephy0 at ure0 phy 0: RTL8251 1000BASE-T media interface, rev. 0 [ 125.258479] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto [ 125.268619] ure0: Ethernet address [_MAC_XXXXXXXXXX] [ 125.268619] rgephy0: detached [ 125.268619] ure0: detached [ 125.280080] ure0: at uhub0 port 1 (addr 2) disconnected [ 125.931279] ure0 at uhub0 port 1 [ 125.931279] ure0: Realtek (0x0bda) USB 10/100/1000 LAN (0x8153), rev 2.10/30.00, addr 2 [ 125.943545] ure0: RTL8153 ver 5c30 [ 126.003698] rgephy0 at ure0 phy 0: RTL8251 1000BASE-T media interface, rev. 0 [ 126.015932] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto [ 126.026388] ure0: Ethernet address [_MAC_XXXXXXXXXX] [ 126.026388] uhub0: autoconfiguration error: illegal enable change, port 1 [ 1257.833193] syncing disks... done [ 1257.843214] unmounting file systems... [ 1257.843214] unmounted tmpfs on /tmp type tmpfs [ 1257.843214] unmounted tmpfs on /var/tmp type tmpfs [ 1257.843214] unmounted tmpfs on /var/shm type tmpfs [ 1257.843214] unmounted procfs on /proc type procfs [ 1257.843214] unmounted ptyfs on /dev/pts type ptyfs [ 1257.843214] unmounted /dev/ld0e on /boot type msdos [ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.000000] 2024 [ 1.000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 10.1 (RPI) #0: Mon Dec 16 13:08:11 UTC 2024 [ 1.000000] [_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/evbarm/compile/RPI [ 1.000000] total memory = 448 MB [ 1.000000] avail memory = 429 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] Kernelized RAIDframe activated [ 1.000000] armfdt0 (root) [ 1.000000] simplebus0 at armfdt0: Raspberry Pi Zero W Rev 1.1 [ 1.000000] simplebus1 at simplebus0 [ 1.000000] simplebus2 at simplebus0 [ 1.000000] simplebus3 at simplebus0 [ 1.000000] cpus0 at simplebus0 [ 1.000000] cpu0 at cpus0: 700 MHz ARM1176JZ-S r0p7 (ARM11J V6ZK core) [ 1.000000] cpu0: DC enabled IC enabled WB enabled LABT [ 1.000000] cpu0: L1 16KB/32B 4-way (128 set) VIPT Instruction cache [ 1.000000] cpu0: L1 16KB/32B 4-way (128 set) write-back-locking-C VIPT Data cache [ 1.000000] vfp0 at cpu0: VFP11, rounding, exceptions [ 1.000000] fclock0 at simplebus2: 19200000 Hz fixed clock (osc) [ 1.000000] fclock1 at simplebus2: 480000000 Hz fixed clock (otg) [ 1.000000] bcmicu0 at simplebus1 [ 1.000000] bcmcprman0 at simplebus1: BCM283x Clock Controller [ 1.000000] bcmtmr0 at simplebus1: VC System Timer [ 1.000000] bcmtmr0: interrupting on icu irq 3 [ 1.000000] bcmaux0 at simplebus1 [ 1.000000] /soc/thermal@7e212000 at simplebus1 not configured [ 1.000000] bcmgpio0 at simplebus1: GPIO controller 2835 [ 1.000000] bcmgpio0: pins 0..31 interrupting on icu irq 49 [ 1.000000] bcmgpio0: pins 32..54 interrupting on icu irq 50 [ 1.000000] gpio0 at bcmgpio0: 54 pins [ 1.000000] bcmdmac0 at simplebus1: DMA0 DMA2 DMA4 DMA5 DMA6 DMA7 DMA8 DMA9 DMA10 DMA11 [ 1.000000] /soc/power at simplebus1 not configured [ 1.000000] /wifi-pwrseq at simplebus0 not configured [ 1.000000] /phy at simplebus0 not configured [ 1.000000] bsciic0 at simplebus1: Broadcom Serial Controller [ 1.000000] bsciic0: interrupting on icu irq 53 [ 1.000000] iic0 at bsciic0: I2C bus [ 1.000000] bcmmbox0 at simplebus1: VC mailbox [ 1.000000] bcmmbox0: interrupting on icu irq 65 [ 1.000000] vcmbox0 at bcmmbox0 [ 1.000000] /soc/firmware at simplebus1 not configured [ 1.000000] /soc/txp@7e004000 at simplebus1 not configured [ 1.000000] plcom0 at simplebus1: ARM PL011 UART [ 1.000000] plcom0: txfifo disabled [ 1.000000] plcom0: interrupting on icu irq 57 [ 1.000000] bcmsdhost0 at simplebus1: SD HOST controller [ 1.000000] bcmsdhost0: interrupting on icu irq 56 [ 1.000000] bsciic1 at simplebus1: Broadcom Serial Controller [ 1.000000] bsciic1: interrupting on icu irq 53 [ 1.000000] iic1 at bsciic1: I2C bus [ 1.000000] com0 at simplebus1: BCM AUX UART, 1-byte FIFO [ 1.000000] com0: console [ 1.000000] com0: interrupting on icu irq 29 [ 1.000000] sdhc0 at simplebus1: SDHC controller [ 1.000000] sdhc0: interrupting on icu irq 62 [ 1.000000] bsciic2 at simplebus1: Broadcom Serial Controller [ 1.000000] bsciic2: interrupting on icu irq 53 [ 1.000000] iic2 at bsciic2: I2C bus [ 1.000000] dwctwo0 at simplebus1: USB controller [ 1.000000] dwctwo0: interrupting on icu irq 9 [ 1.000000] bcmpmwdog0 at simplebus1: Power management, Reset and Watchdog controller [ 1.000000] /soc/vec@7e806000 at simplebus1 not configured [ 1.000000] /soc/hdmi@7e902000 at simplebus1 not configured [ 1.000000] /soc/gpu at simplebus1 not configured [ 1.000000] genfb0 at simplebus1 [ 1.000000] genfb0: framebuffer at 0x5e876000, size 1280x720, depth 32, stride 5120 [ 1.000000] wsdisplay0 at genfb0 kbdmux 1 [ 1.000000] wsmux1: connecting to wsdisplay0 [ 1.000000] wsdisplay0: screen 0-3 added (default, vt100 emulation) [ 1.000000] vchiq0 at simplebus1: BCM2835 VCHIQ [ 1.000000] /arm-pmu at simplebus0 not configured [ 1.000000] gpioleds0 at simplebus0: ACT [ 1.000000] bcmrng0 at simplebus1: RNG [ 1.000000] entropy: ready [ 1.000000] timecounter: Timecounter "bcmtmr0" frequency 1000000 Hz quality 100 [ 1.000003] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 1.040002] sdmmc0 at bcmsdhost0 [ 1.040002] sdhc0: SDHC 3.0, rev 153, caps <01610000/00000000>, platform DMA, 200000 kHz, HS 3.3V, re-tuning mode 1, 1024 byte blocks [ 1.051173] sdmmc1 at sdhc0 slot 0 [ 1.061305] dwctwo0: Core Release: 2.80a (snpsid=4f54280a) [ 1.061305] usb0 at dwctwo0: USB revision 2.0 [ 1.081358] uhub0 at usb0: NetBSD (0x0000) DWC2 root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 1.081358] uhub0: 1 port with 1 removable, self powered [ 1.091384] IPsec: Initialized Security Association Processing. [ 1.161503] sdmmc0: direct I/O error 5, r=6 p=0xc9af2f2c write [ 1.181531] sdmmc0: SD card status: 4-bit, C10, U1, V10, A1 [ 1.181531] ld0 at sdmmc0: <0x27:0x5048:SD16G:0x60:0xda4336f8:0x143> [ 1.192941] ld0: 14772 MB, 7503 cyl, 64 head, 63 sec, 512 bytes/sect x 30253056 sectors [ 1.205003] ld0: 4-bit width, High-Speed/SDR25, 50.000 MHz [ 1.295102] sdmmc1: 4-bit width, 50.000 MHz [ 1.305411] bwfm0 at sdmmc1 function 1 [ 1.315429] (manufacturer 0x2d0, product 0xa9a6) at sdmmc1 function 2 not configured [ 1.745868] ure0 at uhub0 port 1 [ 1.745868] ure0: Realtek (0x0bda) USB 10/100/1000 LAN (0x8153), rev 2.10/30.00, addr 2 [ 1.758384] ure0: RTL8153 ver 5c30 [ 1.818453] rgephy0 at ure0 phy 0: RTL8251 1000BASE-T media interface, rev. 0 [ 1.828520] rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto [ 1.838728] ure0: Ethernet address [_MAC_XXXXXXXXXX] [ 1.849218] uhub0: autoconfiguration error: illegal enable change, port 1 [ 1.849218] swwdog0: software watchdog initialized [ 1.860827] WARNING: 1 error while detecting hardware; check system log. [ 1.860827] boot device: ld0 [ 1.873520] root on ld0a dumps on ld0b [ 1.873520] root file system type: ffs [ 1.884837] kern.module.path=/stand/evbarm/10.1/modules [ 1.894861] vchiq0: interrupting on icu irq 66 [ 1.894861] vchiq: vchiq_init_state: slot_zero = 0xc9b40000, is_master = 0 [ 1.894861] vchiq: local ver 8 (min 3), remote ver 8. [ 1.894861] vcaudio0 at vchiq0: auds [ 1.906397] bwfm0: Firmware file default: brcmfmac43430-sdio.bin [ 1.906397] bwfm0: Firmware file model-spec: brcmfmac43430-sdio.raspberrypi,model-zero-w.bin [ 1.906397] WARNING: no TOD clock present [ 1.906397] WARNING: using filesystem time [ 1.915279] WARNING: CHECK AND RESET THE DATE! [ 1.919774] audio0 at vcaudio0: playback [ 1.919774] audio0: slinear_le:16 -> slinear_le:16 2ch 48000Hz, blk 7680 bytes (40ms) for playback [ 1.933771] spkr0 at audio0: PC Speaker (synthesized) [ 1.933771] wsbell at spkr0 not configured [ 1.963833] bwfm0: Found Firmware file: brcmfmac43430-sdio.bin [ 1.983887] bwfm0: NVRAM file default: brcmfmac43430-sdio.txt [ 1.983887] bwfm0: NVRAM file model-spec: brcmfmac43430-sdio.raspberrypi,model-zero-w.txt [ 1.983887] bwfm0: Found NVRAM file: brcmfmac43430-sdio.raspberrypi,model-zero-w.txt [ 1.983887] bwfm0: CLM file default: brcmfmac43430-sdio.clm_blob [ 1.983887] bwfm0: CLM file model-spec: brcmfmac43430-sdio.raspberrypi,model-zero-w.clm_blob [ 3.725582] bwfm0: CHIPACTIVE [ 3.825655] bwfm0: address [_MAC_XXXXXXXXXX] [ 3.825655] bwfm0: wl0: Oct 23 2017 03:55:53 version[_IP_XXXXX] (r674442 CY) FWID 01-e58d219f [ 18.991205] wsdisplay0: screen 4 added (default, vt100 emulation)