Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2026-08-07 04:14:40
From: sr
Description: VIA EPIA-M850 mini-ITX motherboard
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
2024, 2025, 2026
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 11.0 (GENERIC) #0: Thu Jul 30 15:23:12 UTC 2026
[_EMAIL_XXXXXXXXXXXXXXXXX]:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 7167 MB
avail memory = 6906 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
ACPI: RSDP 0x00000000000FA190 000024 (v02 ACPIAM)
ACPI: XSDT 0x00000000BFFB0100 00004C (v01 100311 XSDT1819 20111003 MSFT 00000097)
ACPI: FACP 0x00000000BFFB0290 0000F4 (v04 100311 FACP1819 20111003 MSFT 00000097)
ACPI: DSDT 0x00000000BFFB0440 00408C (v02 I2D00 I2D00110 00000110 INTL 20051117)
ACPI: FACS 0x00000000BFFBE000 000040
ACPI: APIC 0x00000000BFFB0390 000068 (v02 100311 APIC1819 20111003 MSFT 00000097)
ACPI: MCFG 0x00000000BFFB0400 00003C (v01 100311 OEMMCFG 20111003 MSFT 00000097)
ACPI: OEMB 0x00000000BFFBE040 000082 (v01 100311 OEMB1819 20111003 MSFT 00000097)
ACPI: HPET 0x00000000BFFBA440 000038 (v01 100311 VIA HPET 20111003 MSFT 00000097)
ACPI: 1 ACPI AML tables successfully acquired and loaded
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 0x3, 24 pins
ioapic1 at mainbus0 apid 2: pa 0xfecc0000, version 0x3, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Use cpuid to serialize rdtsc
cpu0: VIA Nano U3300@1200MHz, id 0x6fa
cpu0: node 0, package 0, core 0, smt 0
acpi0 at mainbus0: Intel ACPICA 20241212
acpi0: X/RSDT: OemId <100311,XSDT1819,20111003>, AslId <MSFT,00000097>
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
NBPE (PNP0C01) at acpi0 not configured
acpivga0 at acpi0 (VUMA): ACPI Display Adapter
acpiout0 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (LCD, 0x0110): ACPI Display Output Device
acpiout1: autoconfiguration error: failed to test _BQC quirk
acpiout1: brightness levels: [20,30,40,50,60,80,90,100]
acpiout2 at acpivga0 (TV, 0x0200): ACPI Display Output Device
acpiout3 at acpivga0 (DVI, 0x0120): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0: 0x0100 (acpiout0): Ext. Monitor, head 0, bios detect
acpivga0: 0x0110 (acpiout1): LCD Panel, head 0, bios detect
acpivga0: 0x0120 (acpiout3): Unknown Output Device, head 0, bios detect
acpivga0: 0x0200 (acpiout2): TV, head 0, bios detect
acpiacad0 at acpi0 (ACDP, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
spkr0 at pcppi1: PC Speaker
wsbell at spkr0 not configured
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
com0 at acpi0 (UAR1, PNP0501-1): io 0x3f8-0x3ff irq 4
com0: ns16550a, 16-byte FIFO
com0: console
com1 at acpi0 (UAR2, PNP0501-2): io 0x2f8-0x2ff irq 3
com1: ns16550a, 16-byte FIFO
com2 at acpi0 (UAR3, PNP0501-3): io 0x3e8-0x3ef irq 11
com2: ns16550a, 16-byte FIFO
com3 at acpi0 (UAR4, PNP0501-4): io 0x2e8-0x2ef irq 10
com3: ns16550a, 16-byte FIFO
pckbc1 at acpi0 (PS2M, PNP0F03) (aux port): io 0x60,0x64 irq 12
acpibut0 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
RMEM (PNP0C01) at acpi0 not configured
acpibut1 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
ACPI: Enabled 2 GPEs in block 00 to 0F
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: VIA Technologies VX900 Host Bridge (rev. 0x80)
pchb1 at pci0 dev 0 function 1: VIA Technologies VX900 Error Reporting (rev. 0x00)
pchb2 at pci0 dev 0 function 2: VIA Technologies VX900 CPU Bus Controller (rev. 0x00)
pchb3 at pci0 dev 0 function 3: VIA Technologies VX900 DRAM Controller (rev. 0x00)
pchb4 at pci0 dev 0 function 4: VIA Technologies VX900 Power Management Controller (rev. 0x00)
pchb5 at pci0 dev 0 function 5: VIA Technologies VX900 APIC and Traffic Controller (rev. 0x00)
pchb6 at pci0 dev 0 function 6: VIA Technologies VX900 Scratch Registers (rev. 0x00)
pchb7 at pci0 dev 0 function 7: VIA Technologies VX900 North-South Module Interface Control (rev. 0x00)
vga0 at pci0 dev 1 function 0: VIA Technologies VX900 Graphics [Chrome9 HD] (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
hdaudio0 at pci0 dev 1 function 1: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
hdaudio0: HDA ver. 1.0, OSS 2, ISS 0, BSS 0, SDO 1, 64-bit
hdafg0 at hdaudio0: VIA VX900 HDMI/DP
hdafg0: HDMI00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 PCM24 AC3
audio0 at hdafg0: playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
spkr1 at audio0: PC Speaker (synthesized)
wsbell at spkr1 not configured
ppb0 at pci0 dev 3 function 0: VIA Technologies VX900 PCI Express Root Port 0 (rev. 0x00)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x4 @ 5.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 3 function 1: VIA Technologies VX900 PCI Express Root Port 1 (rev. 0x00)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 3 function 2: VIA Technologies VX900 PCI Express Root Port 2 (rev. 0x00)
ppb2: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb2: link is x1 @ 2.5GT/s
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
vge0 at pci3 dev 0 function 0: VIA VT612X Gigabit Ethernet (rev. 0x82)
vge0: interrupting at ioapic1 pin 8
vge0: Ethernet address [_MAC_XXXXXXXXXX]
ipgphy0 at vge0 phy 22: IP1001 10/100/1000 PHY, rev. 0
ipgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb3 at pci0 dev 3 function 3: VIA Technologies VX900 PCI Express Root Port 3 (rev. 0x00)
ppb3: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb3: link is x1 @ 2.5GT/s
pci4 at ppb3 bus 5
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
vge1 at pci4 dev 0 function 0: VIA VT612X Gigabit Ethernet (rev. 0x82)
vge1: interrupting at ioapic1 pin 12
vge1: Ethernet address [_MAC_XXXXXXXXXX]
ipgphy1 at vge1 phy 22: IP1001 10/100/1000 PHY, rev. 0
ipgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
pchb8 at pci0 dev 3 function 4: VIA Technologies VX900 PCI Express Physical Layer Electrical Sub-block (rev. 0x00)
viaide0 at pci0 dev 15 function 0: VIA Technologies VX900/VX11 SATA controller (rev. 0x00)
viaide0: bus-master DMA support present
viaide0: primary channel configured to native-PCI mode
viaide0: using ioapic0 pin 21 for native-PCI interrupt
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to native-PCI mode
atabus1 at viaide0 channel 1
uhci0 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB Controller (rev. 0xa0)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB Controller (rev. 0xa0)
uhci1: interrupting at ioapic0 pin 22
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB Controller (rev. 0xa0)
uhci2: interrupting at ioapic0 pin 21
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 16 function 3: VIA Technologies VT83C572 USB Controller (rev. 0xa0)
uhci3: interrupting at ioapic0 pin 23
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 16 function 4: VIA Technologies VT8237 EHCI USB Controller (rev. 0x90)
ehci0: 32-bit DMA
ehci0: interrupting at ioapic0 pin 23
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: 4 companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
ehci0: Using DMA subregion for control data structures
usb4 at ehci0: USB revision 2.0
pcib0 at pci0 dev 17 function 0: VIA Technologies VX900 Bus Control and Power Management (rev. 0x00)
pchb9 at pci0 dev 17 function 7: VIA Technologies VX8xx/VX900 South-North Module Interface Control (rev. 0x00)
ppb4 at pci0 dev 19 function 0: VIA Technologies VX8xx/VX900 PCI to PCI Bridge (rev. 0x00)
pci5 at ppb4 bus 6
pci5: i/o space, memory space enabled
hdaudio1 at pci0 dev 20 function 0: HD Audio Controller
hdaudio1: interrupting at msi1 vec 0
hdaudio1: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
hdafg1 at hdaudio1: VIA VT1708S
hdafg1: DAC00 2ch: Speaker [Jack], HP Out [Jack]
hdafg1: ADC01 2ch: Line In [Jack], Mic In [Jack]
hdafg1: DIG02 2ch: SPDIF Out [Jack]
hdafg1: 2ch/2ch 48000Hz PCM16*
audio1 at hdafg1: playback, capture, full duplex, independent
audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr2 at audio1: PC Speaker (synthesized)
wsbell at spkr2 not configured
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 94 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 82 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 70 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 58 %
acpicpu0: T8: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T9: I/O, lat 1 us, pow 0 mW, 46 %
acpicpu0: T10: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T11: I/O, lat 1 us, pow 0 mW, 34 %
acpicpu0: T12: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T13: I/O, lat 1 us, pow 0 mW, 22 %
acpicpu0: T14: I/O, lat 1 us, pow 0 mW, 16 %
acpicpu0: T15: I/O, lat 1 us, pow 0 mW, 10 %
viac7temp0 at cpu0: VIA C7/Nano temperature sensor
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
acpibat0: VIA LION rechargeable battery
acpibat0: granularity: low->warn 0.016 Ah, warn->full 0.016 Ah
IPsec: Initialized Security Association Processing.
uhub0 at usb0: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
wd0 at atabus0 drive 0
wd0: <TOSHIBA THNSNC128GCSJ>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 119 GB, 248085 cyl, 16 head, 63 sec, 512 bytes/sect x 250069680 sectors
wd0: GPT GUID: 998bbf67-8eec-4e9b-bbad-e5d766800c55
dk0 at wd0: "f842b09d-2a0b-4294-bd5f-46d0df7760bc", 134726208 blocks at 64, type: ffs
dk1 at wd0: "10f875c2-b094-437e-b718-b8a0096c44a5", 14680064 blocks at 134726272, type: swap
dk2 at wd0: "e8fdc38f-205f-4adc-938d-7e26df156e3b", 16777216 blocks at 149406336, type: ffs
dk3 at wd0: "3f3f8933-24fd-417d-9c86-e6a01817d4b7", 67108864 blocks at 166183552, type: ffs
dk4 at wd0: "7e7bb7ae-f867-4496-bd5e-a1462cc97878", 16777216 blocks at 233292416, type: ffs
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100), WRITE DMA FUA
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA), WRITE DMA FUA EXT
swwdog0: software watchdog initialized
WARNING: 1 error while detecting hardware; check system log.
boot device: wd0
root on dk0 dumps on dk1
root file system type: ffs
kern.module.path=/stand/amd64/11.0/modules
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)