Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2026-08-07 04:27:31
From: sr
Description: Intel NUC NUC5i5MYHE
---<<BOOT>>---
Copyright (c) 1992-2025 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 15.1-STABLE stable/15-n284649-23216f6309c6 GENERIC amd64
FreeBSD clang version 21.1.8 (https://github.com/llvm/llvm-project.git llvmorg-21.1.8-0-g2078da43e25a)
VT(vga): resolution 640x480
CPU microcode: updated from 0x2d to 0x2f
CPU: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz (2294.83-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306d4 Family=0x6 Model=0x3d Stepping=4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0x21c2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,RDSEED,ADX,SMAP,PROCTRACE>
Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
XSAVE Features=0x1<XSAVEOPT>
VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8137060352 (7760 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <INTEL NUC5i5MY>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key Seed
random: fast provider: "Intel Secure Key Seed"
random: unblocking device.
WARNING: Bogus Interrupt Trigger Mode. Assume CONFORMS.
ioapic0 <Version 2.0> irqs 0-39
Launching APs: 1 2 3
random: entropy device external interface
kbd1 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0xa2ee3c98-0xa2ee3cb6
smbios0: Entry point: v2.1 (32-bit), Version: 2.8, BCD Revision: 2.8
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <INTEL>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xa9000000-0xa9ffffff,0xb0000000-0xbfffffff at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Broadwell HDA Controller> mem 0xaa034000-0xaa037fff at device 3.0 on pci0
xhci0: <Broadwell Integrated PCH-LP chipset USB 3.0 controller> mem 0xaa020000-0xaa02ffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: xECP capabilities <PROTO,PROTO,VEND(c1),VEND(c0),LEGACY,DEBUG>
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
em0: <Intel(R) I218-LM (3)> port 0x3080-0x309f mem 0xaa000000-0xaa01ffff,0xaa03b000-0xaa03bfff at device 25.0 on pci0
em0: EEPROM V0.2-4
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using an MSI interrupt
em0: Ethernet address: [_MAC_XXXXXXXXXX]
em0: netmap queues/slots: TX 1/1024, RX 1/1024
hdac1: <Intel Broadwell HDA Controller> mem 0xaa030000-0xaa033fff at device 27.0 on pci0
ehci0: <Intel Wildcat Point-LP USB 2.0 controller> mem 0xaa03a000-0xaa03a3ff at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Wildcat Point-LP AHCI SATA controller> port 0x30d0-0x30d7,0x30c0-0x30c3,0x30b0-0x30b7,0x30a0-0x30a3,0x3060-0x307f mem 0xaa039000-0xaa0397ff at device 31.2 on pci0
ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
uart: ns8250: UART FCR is broken (0x1)
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (115200,n,8,1)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 16.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
cpufreq0: <CPU frequency control> on cpu0
cpufreq1: <CPU frequency control> on cpu1
cpufreq2: <CPU frequency control> on cpu2
cpufreq3: <CPU frequency control> on cpu3
Timecounter "TSC-low" frequency 1147343949 Hz quality 1000
Timecounters tick every 1.000 msec
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <Intel XHCI root HUB> at usbus0
uhub0 on usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1 on usbus0
uhub1: <Intel XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
hdacc0: <Intel Broadwell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Broadwell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Broadwell (HDMI/DP 8ch)> at nid 3 on hdaa0
hdacc1: <Realtek ALC283 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC283 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC283 (Left Analog)> at nid 33 and 25 on hdaa1
Trying to mount root from zfs:zroot/ROOT/default []...
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Samsung SSD 850 EVO 120GB EMT01B6Q> ACS-2 ATA SATA 3.x device
ada0: [_SERIAL_NUMBER_XXXXXXXXXXXX]
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
uhub1: 15 ports with 15 removable, self powered
uhub0: 3 ports with 3 removable, self powered
Root mount waiting for: usbus1
ugen1.2: <vendor 0x8087 product 0x8001> at usbus1
uhub2 on uhub0
uhub2: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.03, addr 2> on usbus1
uhub2: 8 ports with 8 removable, self powered
Dual Console: Serial Primary, Video Secondary
ichsmb0: <Intel Wildcat Point-LP SMBus controller> port 0x3040-0x305f mem 0xaa038000-0xaa0380ff at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
ig4iic0: <Designware I2C Controller> iomem 0xfe103000-0xfe103fff irq 7 on acpi0
ig4iic0: controller error during attach-1
device_attach: ig4iic0 attach returned 6
ig4iic0: <Designware I2C Controller> iomem 0xfe105000-0xfe105fff irq 7 on acpi0
ig4iic0: controller error during attach-1
device_attach: ig4iic0 attach returned 6
CPU: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz (2294.69-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306d4 Family=0x6 Model=0x3d Stepping=4
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0x21c2fbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,RDSEED,ADX,SMAP,PROCTRACE>
Structured Extended Features3=0x9c000600<MCUOPT,MD_CLEAR,IBPB,STIBP,L1DFL,SSBD>
XSAVE Features=0x1<XSAVEOPT>
VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
em0: link state changed to UP
lo0: link state changed to UP
em0: link state changed to DOWN
Security policy loaded: MAC/ntpd (mac_ntpd)
em0: link state changed to UP
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 0 0 done
All buffers synced.
Uptime: 9m23s