Launched in 2004, dmesgd aims to provide a user-submitted repository of searchable *BSD dmesgs. The dmesg(8) command displays the system message buffer's content, and during boot a copy is saved to /var/run/dmesg.boot. This buffer contains the operating system release, name and version, a list of devices identified, plus a whole host of other useful information. We hope others find this resource useful and further contribute to its growth. Contact us at [ admin at lists dot nycbug dot org ]. Note that this site is not a substitute for sending the dmesg directly to the respective project.
Date: 2026-08-07 20:26:07
From: Mateusz Dukat
Description: FreeBSD/amd64 15.1-RELEASE on Fortinet FortiAnalyzer 200D
---<<BOOT>>--- Copyright (c) 1992-2025 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 15.1-RELEASE releng/15.1-n283562-96841ea08dcf GENERIC amd64 FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) VT(vga): resolution 640x480 CPU: Intel(R) Celeron(R) CPU G540 @ 2.50GHz (2494.44-MHz K8-class CPU) Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xd9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,XSAVE,OSXSAVE> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 4101197824 (3911 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <GBT GBTUACPI> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) random: unblocking device. ioapic0 <Version 2.0> irqs 0-23 Launching APs: 1 random: entropy device external interface kbd1 at kbdmux0 vtvga0: <VT VGA driver> smbios0: <System Management BIOS> at iomem 0xf04c0-0xf04de smbios0: Entry point: v2.1 (32-bit), Version: 2.7, BCD Revision: 2.7 aesni0: No AES or SHA support. acpi0: <GBT GBTUACPI> acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 Event timer "HPET5" frequency 14318180 Hz quality 440 Event timer "HPET6" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 apei0: <ACPI Platform Error Interface> on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xf7f04000-0xf7f043ff irq 16 at device 26.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 usbus0: 480Mbps High Speed USB v2.0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pci2: <ACPI PCI bus> on pcib2 em0: <Intel(R) Gigabit CT 82574L> port 0xe000-0xe01f mem 0xf7e00000-0xf7e1ffff,0xf7e20000-0xf7e23fff irq 18 at device 0.0 on pci2 em0: EEPROM V2.1-3 em0: Using 1024 TX descriptors and 1024 RX descriptors em0: Using 2 RX queues 2 TX queues em0: Using MSI-X interrupts with 3 vectors em0: Ethernet address: [_MAC_XXXXXXXXXX] em0: netmap queues/slots: TX 2/1024, RX 2/1024 pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci3: <ACPI PCI bus> on pcib3 em1: <Intel(R) Gigabit CT 82574L> port 0xd000-0xd01f mem 0xf7d00000-0xf7d1ffff,0xf7d20000-0xf7d23fff irq 19 at device 0.0 on pci3 em1: EEPROM V2.1-3 em1: Using 1024 TX descriptors and 1024 RX descriptors em1: Using 2 RX queues 2 TX queues em1: Using MSI-X interrupts with 3 vectors em1: Ethernet address: [_MAC_XXXXXXXXXX] em1: netmap queues/slots: TX 2/1024, RX 2/1024 pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pci4: <ACPI PCI bus> on pcib4 em2: <Intel(R) Gigabit CT 82574L> port 0xc000-0xc01f mem 0xf7c00000-0xf7c1ffff,0xf7c20000-0xf7c23fff irq 16 at device 0.0 on pci4 em2: EEPROM V2.1-3 em2: Using 1024 TX descriptors and 1024 RX descriptors em2: Using 2 RX queues 2 TX queues em2: Using MSI-X interrupts with 3 vectors em2: Ethernet address: [_MAC_XXXXXXXXXX] em2: netmap queues/slots: TX 2/1024, RX 2/1024 pcib5: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 pci5: <ACPI PCI bus> on pcib5 em3: <Intel(R) Gigabit CT 82574L> port 0xb000-0xb01f mem 0xf7b00000-0xf7b1ffff,0xf7b20000-0xf7b23fff irq 17 at device 0.0 on pci5 em3: EEPROM V2.1-3 em3: Using 1024 TX descriptors and 1024 RX descriptors em3: Using 2 RX queues 2 TX queues em3: Using MSI-X interrupts with 3 vectors em3: Ethernet address: [_MAC_XXXXXXXXXX] em3: netmap queues/slots: TX 2/1024, RX 2/1024 ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xf7f03000-0xf7f033ff irq 23 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci1 usbus1: 480Mbps High Speed USB v2.0 pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci6: <ACPI PCI bus> on pcib6 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf7f02000-0xf7f027ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 uart: ns8250: UART FCR is broken (0x1) uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart: ns8250: UART FCR is broken (0x1) uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 16. est0: <Enhanced SpeedStep Frequency Control> on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 23de00001900 device_attach: est0 attach returned 6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 23de00001900 device_attach: est1 attach returned 6 Timecounter "TSC-low" frequency 1247168456 Hz quality 1000 Timecounters tick every 1.000 msec ugen1.1: <Intel EHCI root HUB> at usbus1 uhub0 on usbus1 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ugen0.1: <Intel EHCI root HUB> at usbus0 uhub1 on usbus0 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 Trying to mount root from ufs:/dev/ada0s1a [rw]... ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <ADATA SU650 V8X01b10> ACS-3 ATA SATA 3.x device ada0: [_SERIAL_NUMBER_XXXXXXXXX] ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 114473MB (234441648 512 byte sectors) ses0 at ahciem0 bus 0 scbus6 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered Root mount waiting for: usbus0 usbus1 ugen0.2: <vendor 0x8087 product 0x0024> at usbus0 uhub2 on uhub1 uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0 ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 uhub3 on uhub0 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 Root mount waiting for: usbus0 usbus1 uhub3: 6 ports with 6 removable, self powered uhub2: 6 ports with 6 removable, self powered ichsmb0: <Intel Cougar Point SMBus controller> port 0xf000-0xf01f mem 0xf7f01000-0xf7f010ff irq 18 at device 31.3 on pci0 smbus0: <System Management Bus> on ichsmb0 em0: link state changed to UP lo0: link state changed to UP em0: link state changed to DOWN em0: link state changed to UP Security policy loaded: MAC/ntpd (mac_ntpd)